- Home
- Applications
- USA
- research instrument
Refine by
Research Instrument Product Applications In USA
29 applications found
Precise detection instruments for research industry - Environmental - Environmental Science and ...
ByGRIMM Aerosol Technik GmbH & Co. KG - a member of the Durag Group based in  Hamburg, GERMANY
Premium
In most of the developed countries, the residual content of this fungicide is subject to national and international regulations. Researchers of LUMEX INSTRUMENTS, Ltd. have developed an analytical procedure for determination of the Carbendazim content in orange and other citrus juice produce using a capillary electrophoresis system ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
There are several experimental studies of the properties of concentrated oxides dispersions (rutile, zirconia, alumina, zinc oxide, ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Technical Associates and Overhoff Technology, divisions of US Nuclear Corp, work closely with a number of National Laboratories and University Research programs providing radiation detection and monitoring instrumentation for their facilities assisting their efforts in both research and workplace ...
ByUS Nuclear Corporation based in  Canoga Park, CALIFORNIA (USA)
Premium
Introduction The indicator (tracer) method is used in hydrology for following, or tracing, the water flows for understanding the processes in hydrological systems. Oil companies often use the indicator (tracer) method for monitoring the exploitation of oil pools. Indicator (tracer) method gives essential information on the geological structure of the oilfield and the filtration flows in the ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Applications of Acoustics and Electroacoustics for characterizing mineral dispersions are described in the papers listed below. Titration option of the DTI instruments is suitable for determining optimum dose of surfactant for stabilizing clay and mineral ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Both ultrasound based methods, Acoustics and Electroacoustics, can be used for monitoring effects of the plastisizer on the properties of cement slurry, as proved in the papers listed below. With no dilution. Elimination of dilution is critical for accurate measurement of the cement zeta potential Cement slurry could be affect very strongly by dilution. Zeta potential probe offers zeta potential measurement with precision 0.1 ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Acoustics provides opportunity for characterizing content of nano-particles in cosmetic dispersions with broad Particle size distributions. Precision is about 1% of the total solids ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Electroacoustics could be used at the extremely high ionic strength above 1 M, as well as for non-polar liquids with conductivity below 10-10 S/m. This method yields not only zeta potential at these extreme conditions, but also electric surface charge and even size of ions in non-polar ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Propagation of ultrasound through a porous body creates motion of liquid inside of the pores relative to the solid matrix. This, in turn, causes relative motion of ions that are located in the diffuse layer and on the pores surfaces. This shows us as an electric current. This current is similar to the Streaming Current, with the difference that it oscillates in time. It is called Streaming Vibration Current. There have been 3 papers already published reporting experimental observation of this effect. The first ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Detail study presented in the paper listed below indicates that Acoustics yields a proper Particle size distribution in various dairy products. This can be achieved with no dilution. In addition, Acoustics yields information for calculating fat ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Acoustics makes possible measurement of Particle size of the emulsion and microemulsion droplets with no dilution, which is critical for these systems. Papers presented below indicate very good agreement between this method and independent data. Combination of Acoustics and Electroacoustics could reveal peculiar mechanisms controlling emulsion stability, such as ion exchange in water-in-oil ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Our PID based instruments are able to measure VOC in concentrations as low as 1 PPB. This means that our VOC detectors are ready to be deployed in areas of the plant where detecting VOC at low levels can be critical to the quality of the end product. Aside from safety and quality assurance based instruments, Ion Science also offers a range of test and inspection instruments for this ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Premium
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
ByAMETEK Spectro Scientific based in  Chelmsford, MASSACHUSETTS (USA)
Premium
Engine manufacturers use Spectro Scientific oil analysis instruments to assist in engine testing during new product development, testing engines during manufacturing run-in, and for qualifying new lubricants. Engines include: Gasoline and diesel automobile engines. Truck and other high speed diesel engines. Medium speed diesel engines such as those used for locomotives, marine and power generation. Extremely large low speed diesel engines for marine propulsion and power generation. Motorcycle engines. High ...
ByAMETEK Spectro Scientific based in  Chelmsford, MASSACHUSETTS (USA)
Premium
Machine condition monitoring based on oil analysis has become an essential maintenance practice of military organizations throughout the world. An effective oil analysis program will keep important military assets such as planes, ships, tanks, trucks, and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. Mission readiness of military equipment is paramount, and proper maintenance can also decrease the long-term expense by minimizing replacement costs and ...
ByAMETEK Spectro Scientific based in  Chelmsford, MASSACHUSETTS (USA)
Our PID based instruments are able to measure VOC in concentrations as low as 1 PPB. This means that our VOC detectors are ready to be used in the University and Laboratory environment to detect VOC at low levels, this can be critical to the quality of work / research taking place. Aside from safety and quality assurance based instruments, ION Science also offers a range of test and inspection instruments for this industry. ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
The EDX9000A metal element analyzer is a state-of-the-art spectrometer recently developed by Inphase Scientific Instruments. This versatile instrument can effectively detect the concentrations of various elements, including titanium (Ti), vanadium (V), aluminum (Al), tungsten (W), niobium (Nb), magnesium (Mg), rare earth elements, cobalt (Co), sulfur (S), manganese (Mn), phosphorus (P), silicon (Si), chromium (Cr), nickel (Ni), molybdenum (Mo), copper (Cu) and more in materials such as carbon steel, alloy steel, ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in  SuZhou City, CHINA
Premium
The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the final blend ...
ByAMETEK Spectro Scientific based in  Chelmsford, MASSACHUSETTS (USA)