- Home
- Applications
- USA
- wastewater testing
Refine by
Locations
Wastewater Testing Product Applications In USA
62 applications found
Premium
In option, for : Water surveillance, with sulphur in air in option Waste water plant River water Rain water Sea water ...
ByChromatotec based in  Saint-André de Cubzac, FRANCE
Premium
Experience the versatility and flexibility of a single instrument capable of characterizing microorganisms 2 µm to 1 mm in size. FlowCam provides a rapid, accurate, and easy-to-use alternative to manual microscopy for monitoring phytoplankton biovolume and community composition. Time series studies with large image datasets allow for better understanding of the subtle changes in local plankton ...
ByYokogawa Fluid Imaging Technologies, Inc. based in  Scarborough, MAINE (USA)
Premium
AirmOzone Purge & Trap ref. A52022-502. The complete unit with analysers for continuous monitoring of 60 VOC including BTEX with US EPA 502-2 ...
ByChromatotec based in  Saint-André de Cubzac, FRANCE
Premium
The vigi e-nose is an analyzer able to track VOCs, Sulfur compounds and other molecules such as ammonia for example. It allows to provide a rich global fingerprint to correlate with human sensory evaluation as dynamic olfactometry as example. It is possible to train the vigi e-nose with human sensory samples to study correlation with ASTM 679-E04 or EN 13725. As electronic nose, it provides chemical and olfactive fingerprint. The main differences are that vigi e-nose offers with single instrument : ...
ByChromatotec based in  Saint-André de Cubzac, FRANCE
Premium
Introduction: The method allows determination of ammonium, lithium, sodium, potassium, magnesium, calcium, strontium and barium cations in samples of natural, potable, and waste water by the capillary electrophoresis ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: The method is used for the determination of the mass concentration of inorganic anions: chloride, nitrite, sulfate, nitrate, fluoride, phosphate in samples of drinking, natural, waste waters, and other aqueous matrices by capillary ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Wastewater treatment facilities test for COD, BOD, TSS, Ammonia, Nitrite and much more. ...
ByInvivo Biosciences, LLC based in  Lawrenceville, GEORGIA (US) (USA)
Anaerobic biodegradation tests – often referred to as Biochemical Methane Production (BMP) tests – involve addition of known amounts of a chemical or wastewater to anaerobic cultures. ...
ByRespirometer Systems and Applications, LLC (RSA) based in  Fayetteville, ARKANSAS (USA)
Premium
Efficient water analysis with leading technologies. Our solutions for higher water quality and purity: Discover applications and technologies for analyzing drinking, process as well as surface water, including salt water. Learn about analytical solutions for parameters such as TOC and TNb as well as analysis methods for mercury, trace and toxic elements. Benefit from culture-independent PCR methods for microbiological testing of condensates from evaporative cooling systems, for example, which allow results to be ...
ByAnalytik Jena - Lab-loving people based in  Jena, GERMANY
Premium
Flow Imaging Microscopy with FlowCam enables efficient characterization of microplastic particles during membrane-based filtration processes in wastewater treatment ...
ByYokogawa Fluid Imaging Technologies, Inc. based in  Scarborough, MAINE (USA)
Premium
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
ByChromatotec based in  Saint-André de Cubzac, FRANCE
Premium
Introduction: This analytical procedure is designed to measure the content of the elements (arsenic, barium, cadmium, cobalt, manganese, copper, iron, nickel, lead, strontium, and zinc) in seawater samples. Determination of the dissolved forms of the elements in samples with salinity up to 50‰ (including water from oceans and estuaries) is performed using MGA-1000 Graphite Furnace AA Spectrometer. The measurement ranges of the procedure cover all the specified maximum allowable concentration levels and ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
A distinction is made between low water (LW) and high water (HW) limiters. Whereas LW limiters are in principle required for the safe operation of a plant in accordance with European regulations, HW limitation (overfill protection) is required only in accordance with TRD 604 for 72-hour ...
ByIGEMA GmbH based in  Münster, GERMANY
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY
Test Setup: A series of dilutions consisting of 50, 75, 100, 125, 150, and 175 mL of test wastewater were added to respective 500 mL respirometer flasks along with nutrients, minerals, and buffers. ...
ByChallenge Technology based in  Springdale, ARKANSAS (USA)
Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR ...
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY
Optically compensated sensors and versatile instrumentation make deployed harmful algal bloom monitoring effective and ...
ByIn-Situ Environmental based in  Fort Collins, COLORADO (USA)
Influent Phosphate Monitoring Continuous phosphate measurement at inlet of a wastewater treatment plant for feed-forward control. When water from a variety of sources enters the plant, continuous phosphate measurements are critical to ensure efficient process control and inform early chemical dosing during the primary treatment. In-Situ ChemScan mini analyzers with large, anti-clogging sample lines, a rugged manifold design and a self-cleaning pump to eliminate fouling provide a reliable, low-maintenance ...
ByIn-Situ Process based in  Fort Collins, COLORADO (USA)
Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate ...
ByBanner Engineering Corp. based in  Minneapolis, MINNESOTA (USA)
Clean Water Act outlines hundreds of parameters for testing wastewater for discharge. It also gives an in-depth explanation of a wide variety of fines from several thousand dollars to over fifty million dollars. Keeping wastewater treated properly and within federal standards can save your organization money and ...
ByJBMbio.com based in  Armada, MICHIGAN (USA)