USA
Applications

Xprt Product Applications In USA

11,150 applications found

Assembly lubricants for Automotive industry

P-80 Lubricants provide a safe and easy way to improve automotive assembly operations. Rubber’s non-slip quality can make an assembly process very difficult. Without an assembly aid, tight-fitting rubber components can cause production to slow down, and quality and safety standards to slip. The P-80 line is specially formulated to provide temporary lubrication that makes rubber easy to install, remove, or otherwise ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Assembly lubricants for Bus industry

The bus transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Assembly lubricants for Construction industry

P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Assembly lubricants for Marine industry

The boat, marine engine and accessory industry relies heavily on natural and synthetic rubber for various purposes including engines, propeller hubs, pumps, hoses, seals, O-rings and grommets. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve assembly operations of rubber and soft plastic ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Assembly lubricants for Motorcycle industry

The transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, grips, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Assembly lubricants for Pump/HVAC industry

P-80 Lubricants are the perfect solution for pump and seal repairs. They have been used for years by pump manufacturers, HVAC companies, pool & spa manufacturers, treatment plant operators and maintenance professionals to maintain equipment and replace parts such as seals, O-rings, hoses, grommets, and ...

ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)

Activated Carbon for Biochar – Natural Soil Improvement

Biochar is formed through the carbonisation of organic matter. Biochar can be used in many different ways. The decisive factor is always which quality criteria have to be met. Carbonisation – the conversion of organic material to biochar – is a process that has been known and practised for many centuries. However, only the state-of-the-art PYREG process can control the process parameters in such a way that biochar can be produced in different quality levels and nutrients can be gently recovered. ...

ByPyreg GmbH based in Dörth, GERMANY

Municipal wastewater solutions for digestion & biogas sector

Waste to Energy is a form of energy recovery through anaerobic digestion. Anaerobic digestion is a series of biological processes in which microorganisms break down biodegradable material (biomass or waste feedstock) in the absence of oxygen. One of the end products is biogas, which is combusted to generate electricity and heat, or can be processed into renewable natural gas and transportation ...

ByJWC Environmental based in Santa Ana, CALIFORNIA (USA)

Oil and Fuel Spills Solution for Stormwater Application

PRP (Petroleum Remediation Product) can help absorb and remediate oil, fuel and other liquid petroleum hydrocarbons which may be carried along with water, potentially leading to stormwater runoff areas and stormwater systems. Below are a few examples where PRP has worked to cleanup oil and fuel in stormwater ...

ByUnited Remediation Technology, LLC based in Pittsburgh, PENNSYLVANIA (USA)

Oil and Fuel Spills Solution for Railroad Application

Problem: Ground contamination created by engines idling in rail yards at the hump area or in maintenance areas. The current method of retaining the contaminants is through the use of Track Mat, which is costly, time consuming and not environmentally friendly. Track Mats are a short-term fix as they are limited in the amount of oil/grease they can absorb and eventually the excess oil or grease sinks into the ballast. In addition, there is a large cost to dispose of used Track ...

ByUnited Remediation Technology, LLC based in Pittsburgh, PENNSYLVANIA (USA)

Respirometry system for anaerobic biochemical methane production

Anaerobic biodegradation tests – often referred to as Biochemical Methane Production (BMP) tests – involve addition of known amounts of a chemical or wastewater to anaerobic cultures. The quantity of methane production – relative to that from a control – indicates the biodegradation potential. This case study shows methane production for a Control reactor and three test reactors that were operated at 20-, 30- and 45-day retention times and received three doses of industrial wastewater. The ...

ByRespirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA)

Application of respirometry system for biodegradation testing

The pattern of oxygen uptake– relative to that for a control substrate – gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample. In this case, samples #2 and #3 showed a much lower biodegradation rate than the ...

ByRespirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA)

Advanced biotechnology solutions for land reclamation sector

MicroMix - A smarter approach for bioremediation & odor control. Rapid On-Site Remediation of soil and media contaminated with petrochemical, and hydrocarbons is the most cost effective means of dealing with contamination. Micronomix USA has developed a simple yet highly effective in-situ remediation technology that helps companies deal efficiently with contaminated soils and/or oil spills. Upon application, MicroMix Aqua immediately starts to attack the hydrocarbons and converts them into humus thereby ...

ByMicronomix, LLC based in Ocala, FLORIDA (USA)

Air filtration solutions & corrosion monitors for public transportation

Travel in comfort. We protect passengers from unwanted odors and irritating exhaust while creating a pleasant, comfortable, and healthier transportation ...

ByPurafil, Inc. - Filtration Group based in Doraville, GEORGIA (US) (USA)

Biofuel Cells for Medical Industry

Does your medical device use conventional minature batteries? Unlike conventional power sources, BeFC solutions are made from biosourced and biodegradable materials, reducing your costs when it comes to product disposal and ...

ByBioenzymatic Fuel Cells (BeFC) based in Gières, FRANCE

Odor Control Solutions for Solid Waste

AirSolution for Solid Waste neutralizes offensive odors related to mixed organic waste decomposition. It is applicable for large applications, for example, transfer stations, landfills & composting operations. Common equipment used in solid waste applications are Ecolo’s AMC Misting Systems. ...

ByEcolo Odor Control Technologies Inc. based in Toronto, ONTARIO (CANADA)

Odor Control Solutions for Government-Approved Cannabis Greenhouses

XStreme Solution #8420 Clean and Pure is designed to neutralize targeted malodors. These malodors include terpenes such as myrcene, caryophyllene, and terpinolene (the aromatic components of the cannabis plant), and sulfur-containing chemicals common to loading docks, garbage transfer stations and exhaust stacks. Made in consultation with commercial cannabis growers, third-party testing has proven #8420 Clean and Pure to be 100% effective at removing cannabis odor from the ...

ByEcolo Odor Control Technologies Inc. based in Toronto, ONTARIO (CANADA)

Research respirometer equipment for biochemical oxygen demand measurement sector

Test Setup: A series of dilutions consisting of 50, 75, 100, 125, 150, and 175 mL of test wastewater were added to respective 500 mL respirometer flasks along with nutrients, minerals, and buffers. TCMP was added to eliminate interference from nitrification. Oxygen uptake was measured over a five-day test period using a CHALLENGE AER-200 ...

ByChallenge Technology based in Springdale, ARKANSAS (USA)

Research respirometer equipment for biodegratation kinetics of industrial wastes sector

Method: An industry was discharging wastewater to a municipal sewer and was suspected of causing problems with treatment at the plant. Samples of the industrial wastewater were collected and oxygen uptake for four dilutions was measured using a CHALLENGE AER-200 aerobic/anaerobic respirometer system. Biodegradation kinetic coefficients were determined using the method described by Dang, et. al. (Res. J. of Water Poll. Control Fed., p. 1711, 1989). Results of the oxygen uptake measurements and kinetic analyses are ...

ByChallenge Technology based in Springdale, ARKANSAS (USA)

Research Respirometer Equipment for Pharmaceutical Wastewater Industry

A pharmaceutical company was interested in knowing whether a specific component, MCB, inhibited the biodegradation of other wastewater constituents. A series of respirometer tests was set up using identical mixtures of wastewater and return activated sludge (RAS) plus varying amounts of MCB. The OUR fingerprint of this wastewater includes a first peak of about 500 mg/L-hr within the first hour of contact that represents the oxidation of highly-biodegradable organic constituents. A second group of readily ...

ByChallenge Technology based in Springdale, ARKANSAS (USA)

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you