USA
Applications

Xprt Product Applications In USA

11,173 applications found

Marine Hydrokinetic (MHK) for energy industry

The marine hydrokinetic (MHK) energy sector is now emerging and its potential is vast. The U.S. Department of Energy (DOE) estimates that the power contained in the world’s ocean is equivalent to 5,000 GW worldwide. In response to this renewable energy opportunity the UK Crown Estate has issued 1800MW of tidal site allocations. Terrestrial renewables, primarily wind and solar, are in rapid deployment around the world – new investment in renewable energy generated electric power exceeded investment in ...

ByAquantis, Inc. based in Santa Barbara, CALIFORNIA (USA)

Drone Surveying Equipment for Infrastructure Inspection

Power lines. Cell towers. Oil and gas pipelines. Railways– all of these and so many other types of industrial inspection are made easier, safer, and more efficient with Microdrones EasyOne fully integrate high-performance drones with advanced TrueView LiDAR sensors and LP360 data processing software. Large, complex structures are best surveyed from the air. It’s no wonder that inspection has been one of the first UAV applications to be quickly and widely embraced world-wide. ...

ByMicrodrones GmbH based in Madison, ALABAMA (USA)

Cathodic Protection and Pipeline Integrity Monitoring Solution for Wind Turbines

Offshore wind turbine foundations are engineered with a variety of designs. The four most common designs are monopiles, jacket, tripod and gravity foundations but the majority of US offshore wind resources are in deep waters and utilize spar-buoy, semi-submersible, and tension leg platform designs. The foundation used and the suitable size depends on external factors such as water depth, wind speed, height of waves and the seabed ...

ByMobiltex Data Ltd. based in Calgary, ALBERTA (CANADA)

Perfect Solutions for All Types of Water Turbine Systems

In hydropower plants of any type, e.g. run-of-river power stations, storage power stations or wave power plants, the energy generation is implemented by means of special water turbines, e.g. constant-pressure turbines and reaction turbines. The motion energy of the water is converted into rotational energy by means of the water turbine, which effects the rotation of the turbine shaft which, in turn, actuates a generator that generates power. Irrespective of the type of power plant or turbine you’re dealing ...

ByRINGFEDER POWER TRANSMISSION GMBH based in Gross-Umstadt, GERMANY

Water treatment solutions for power generation industry

Many applications within the power generation industry, particularly those involving steam generation, are highly dependent on optimal water quality to improve the efficiency and longevity of critical components such as boilers, steam turbines, and cooling towers and related systems. Effective water treatment strategies mitigate challenges like scaling, corrosion, and fouling, resulting in reduced operational costs and minimized environmental impact. Our consultants are qualified to support the various subsets ...

ByArthur Freedman Associates, Inc. (AFA) based in Dyer, INDIANA (USA)

Plasma Vortex Technology for Industrial Process Water Industry

The considerable challenge presented by per- and polyfluoroalkyl substances (PFAS) in industrial wastewater requires advanced technological solutions, especially as these substances are widely used in multiple industries, including the production of semiconductors, medical devices, and wind turbine blades. Onvector's Plasma Vortex technology caters to this need by offering an efficient method for the treatment of high-concentration process and wastewaters containing PFAS levels exceeding 1 mg/L. This technology is ...

ByOnvector LLC based in Somerville, MASSACHUSETTS (USA)

Acoustic Measurement Solutions for acoustic and thermal imaging sector

What is Acoustic Imaging? Acoustic and thermal imaging combines two powerful diagnostic modalities: sound visualization and infrared heat mapping. This technology enables the detection of mechanical faults, fluid leaks, electrical discharge, and energy losses — all without interrupting operations or dismantling equipment. Acoustic imaging identifies ultrasonic emissions, structure-borne noise, or tonal irregularities, while thermal imaging reveals temperature gradients, overheating, or cooling ...

ByZXONIC based in San Jose, CALIFORNIA (USA)

Radiation, Chemical and Biological Instruments for Public Security

When public security is considered it is almost always in terms of an active shooter or a bomber. This means the police, SWAT, bomb squad, Homeland Security. But it also means terrorist activity. From dirty bombs in backpacks to radioactive material dumped in reservoirs to depleted uranium bullets and other tactical ordnance to radioactive smoke coming out of a burning medical facility, the need to protect the First Responders from encountering a radioactive threat is essential. Technical Associates, a division ...

ByUS Nuclear Corporation based in Canoga Park, CALIFORNIA (USA)

Advanced Monitoring Software for Industrial Measurement

The Red Meter is an industrial measurement system that provides key measurement data which can be used to optimize processes in real time. The data provided by a Red Meter can be used to calculate and measure density, pressure, flow rate and accumulated ...

ByRed Meters based in Orlando, FLORIDA (USA)

Particle Measurement Instruments for Engine Emissions

Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...

ByDekati Ltd. based in Kangasala, FINLAND

Particle Measurement Instruments for Non-Exhaust Vehicle Emissions

As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...

ByDekati Ltd. based in Kangasala, FINLAND

Dust Suppression Systems for Thermal Power Plants

Coal feeding bunkers, crushers, conveyor belt transfer points, raw material stacker & reclaimer (stocker & collector), triper car, bunker loading & unloading and stockpiles are used in thermal power plants with single, double fluid water pulverization and With fan spray dust control systems, dust is reduced to below the limit values specified in the “Control of Industrial Air Pollution” regulation of the Ministry of Environment and Urbanization. These values are also compatible with the ...

ByEnvex based in Kahramankazan, TURKEY

Dust Suppression Systems for Iron & Steel Factories

In Iron & Steel Factories, trucks, wagon-tippers and scoops, coal, ore feed bunkers and scrap loading and unloading areas, crushers, scrap sieves, conveyor belt transfer points, raw material stacker & reclaimer (stocker & collector), triper car, bunker loading & In the suppression of dust released by wind during stockpiling and in stockpiles, dust is reduced to below the limit values specified in the “Control of Air Pollution by Industry” by the Ministry of Environment and Urbanization ...

ByEnvex based in Kahramankazan, TURKEY

Dust Suppression Systems for Port Material Handling Operations

Environmental protection of dust with water pulverization fan control dust control systems in loading and unloading with bunker, loading and unloading with cranes bucket crane in port bulk material transportation operations, loading with conveyor belt and ship loading operations, and suppressing the dust released by wind. and lower than the limit values specified in the “Control of Industrial Air Pollution” regulation of the Ministry of Urban Planning. These values are also compatible with ...

ByEnvex based in Kahramankazan, TURKEY

Dust Suppression Systems for Mining Stockyards

The raw material stacked in the stock areas is reduced to the limit values specified in the “Industrial Air Pollution Control” regulation of the Ministry of Environment and Urbanization with water pulverization fan spraying dust control systems during loading and unloading and suppression of dust released by wind. These values are also compatible with international PM 10 measurement limit values, which are sub-10 micron particle ...

ByEnvex based in Kahramankazan, TURKEY

PFM Technology for Minerals Processing

SONARtrac PFM technology together with CYCLONEtracTM PST takes mill grinding efficiency to even higher levels - Combining the power of SONARtrac VF/GVF with PFM and CiDRA’s CYCLONEtrac Particle Size Tracking System (PST), which provides real-time particle size measurement of each cyclone, there is finally an integration of technologies that truly enables the transformation of data, to knowledge, to action, thereby providing the ability to optimize recovery, throughput and net metal production. When sump ...

ByCiDRA Corporate Services Inc. based in Wallingford, CONNECTICUT (USA)

Dust Collector Cartridge Filter Cleaning

The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5' and an outer diameter less than 20'. The Green Filter Cleaning Machine will accept filter heights up to 32' (40' extended unit available). The filter cleaning mechanism ...

ByDiversitech based in Saint-Laurent, QUEBEC (CANADA)

Hydrological and environmental monitoring Systems for Groundwater monitoring industry

Groundwater hydrology is an interpretive science: we can’t observe the aquifers directly so we must interpolate and extrapolate our understanding from water-level measurements taken from observation wells. Stevens has expertise for measuring both water quantity and water ...

ByStevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA)

Analysis of Herbicides in Drinking Water

Herbicides are used throughout the world to combat the growth of unwanted plant life. These polar compounds are hydrophilic, so they may find their way into drinking water sources. While gas chromatography has historically been the preferred technique for analysis of herbicides in water samples, the use of LC-MS/MS for this application is gaining acceptance. This is due to the power of MS/MS to provide detailed identification of multiple analytes, but also in part due to the variety of HPLC stationary phases ...

BySigma-Aldrich based in Bellefonte, PENNSYLVANIA (USA)

Agitation and mixing solutions for water and wastewater treatment.

Municipal water treatment facilities utilize continuous mixing to process drinking water for municipalities. There are a variety of drinking water sources and therefore different processing steps for the water. Processes utilize rotating and static mixing to treat the water for human ...

ByNational Oilwell Varco (NOV) based in Houston, TEXAS (USA)

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you