Refine by
Industries served
- Air and Climate
- Manufacturing, Other
- Energy
- Oil, Gas & Refineries
- Glassware
- Water and Wastewater
- Monitoring and Testing
- Mining
- Pulp & Paper
- Food and Beverage
- Metal
- Chemical & Pharmaceuticals
- Agriculture
- Environmental
- University / Academia / Research
- Construction & Construction Materials
- Automobile & Ground Transport
- Electronics and Computers
- Medical / Health Care
- Plastics & Resins
- Government
- Aerospace & Air Transport
- Forestry & Wood
- Packaging
- Commercial
- Waste and Recycling
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Textile
- Soil and Groundwater
Xprt Product Applications In Venezuela
311 applications found
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Gasification of slurry/liquid feedstock to syngas. Light hydrocarbons in the slurry phase can be converted to syngas by gasification, reacting the feedstock with oxygen to produce hydrogen and carbon monoxide. Accurate thermal data assists process ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Storage processes in HPI (e.g., tanks, stockpiles monitoring). Storing materials for the hydrocarbon processing industry presents several challenges. Temperature monitoring is important, both for safety purposes and to prevent loss or degradation of the stored ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Paper manufacturing processes (dryers, calendering, etc.). Paper quality varies widely according to the rolling and drying processes used in production. These require temperature monitoring to protect equipment from damage and ensure the desired paper ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Lime (calcium oxide) production processes. Lime is produced when limestone is heated in a kiln. This creates quicklime, which can be further processed to form hydrated lime. Lime production releases emissions which must be ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Biomass fuel production or usage processes in energy generation. Biomass fuels such as wood pellets, bagasse and hog fuels can be burned to generate power. However, they are more susceptible to spontaneous combustion than traditional fuels such as bituminous ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Coal power generation processes (combustion monitoring, etc.). Coal remains one of the most widely-used sources of energy for power generation. Accurate monitoring is essential to demonstrate compliance with environmental regulations and to ensure safe, efficient ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Industrial emissions monitoring processes. The combustion process in power generation inevitably generates emissions of toxic gases and particulate matter. Accurate monitoring allows you to demonstrate that your process remains within the allowed emissions limits, minimizing the risks to human health and to the wider ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Waste-to-energy or waste management processes. Waste-to-energy plants burn municipal waste and use the resulting heat to generate power. Proper understanding of the combustion process is essential to ensure complete destruction of the waste ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Measures to boost energy efficiency in industrial processes. Decarbonisation trends will change how industrial operators work – forcing end-users, technology licensors, and instrument manufacturers to continuously seek incremental and radical improvements to process ...
ByLAND® based in  Dronfield, UNITED KINGDOM