- Home
- Applications
Refine by
Xprt Product Applications For The Electronics And Computers Industry
125 applications found
Premium
Anguil’s portfolio of innovative, competitive solutions for this rapidly evolving industry provide guaranteed VOC destruction, reduced equipment footprint, and maximized production uptime and ...
ByAnguil Environmental Systems, Inc. based in  Milwaukee, WISCONSIN (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
ByGranutech-Saturn Systems based in  Grand Prairie, TEXAS (USA)
Premium
The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at ...
ByMetrohm AG based in  Herisau, SWITZERLAND
Premium
NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential. ...
ByECO Physics AG based in  Duernten, SWITZERLAND
Premium
As technology advances, electronic devices and their components are becoming increasingly compact, making it challenging to examine their internal workings. To address this, we provide borescopes and cameras that aid in the inspection and the condition assessment of such devices and circuits. Our video borescopes allow visual examination of wiring, connections, or circuit boards, eliminating the need for expensive and time-consuming disassembly. Once within the device, you can direct the camera toward the specific ...
ByFIBERSCOPE.net based in  Winnipeg, MANITOBA (CANADA)
Premium
High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these ...
BySnowPure Water Technologies based in  San Clemente, CALIFORNIA (USA)
Premium
In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
OEMs that manufacture wafer cleaning tools need mass flow meters and controllers with low pressure drop, precision mass flow control while at the same time are easy to use, have a small footprint, and come with a global support ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Electric motors are crucial elements in industrial processes, and their failure can result in significant production and financial setbacks due to process shutdowns. To address this, the Condence system offers an advanced online condition monitoring solution for electric motors. The system helps in identifying potential failure modes which are often interrelated, such as mechanical overload leading to electrical overload or bearing wear causing overheating. Condence utilizes high-frequency vibration monitoring to ...
ByDistence Oy based in  Espoo, FINLAND
Topdry gives you the best-practice solution of moisture damage prevention for all types of cargo. ...
ByLindia Chemical based in  Panyu District, CHINA
As devices get smaller and the fabrication plants get larger, the purity of the water required for ultrapure water systems increases. In terms of water reuse, the industry has relatively conservative attitudes towards recycling water for ultrapure water applications, but wastewater is treated and reused for cooling and other less critical purposes. Besides semiconductors, two other silicon-based sectors of the microelectronics industry need large volumes of highly pure water: flat panel displays (FPD) and ...
ByGlobal Water Intelligence (GWI) based in  Oxford, UNITED KINGDOM
Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials ...
BySA Eng. based in  San Vittore Olona, ITALY
Component placement verification in electronic assemblies presents metrology challenges that are almost as wide and varied as the range of electronic designs and the types of components used. Key process control parameters that must be measured include component positioning and rotation (X, Y, and theta) relative to pads, as well as checking for missing and/or damaged ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Leadframe inspection presents a wide variety of feature sizes and geometry, requiring metrology systems that can be flexibly programmed for fast and accurate three-dimensional measurements. Die-to-pad placement/alignment, lead positions/sizes, lead tilt and twist angles, pitch, lead widths, lead-coplanarity, and dam-bar dimensions all represent critical factors that must be tightly controlled. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Flex circuit technologies pose a wide range of metrology challenges with a large number of different circuit geometries, pitch dimensions, and surface reflectivity factors. To meet these challenges, metrology systems for flex circuit inspection must incorporate advanced functionality such as versatile lighting, large-size stages, high-resolution positioning, and very accurate laser probe capabilities. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
The ARC-100 is a safe, reliable, and cost-effective technology that can be used to provide carbon-free electricity to small and large communities around the ...
ByARC Clean Technology, Inc. based in  Saint John, NEW BRUNSWICK (CANADA)
The importance of cleanrooms in the electronic industry. Air purity is essential for efficient production. The laboratories where technicians produce the components installed in smartphones, computers, and all electronic devices are subject to a high environmental control level. Any particles in suspension - commonly called dust - could cause irreparable damage to chips and microprocessors, becoming waste material. To maintain a high-efficiency rate, manufacturers have equipped themselves with clear rooms where ...
ByETG Risorse e Tecnologia S.r.l. based in  Chivasso (TO), ITALY
PennWell's Cabling & Broadband Group is the trusted resource engineers and engineering managers turn to for up-to-date information focused on the structured cabling, optical communications and broadband industry. Featuring leading industry publications, websites, eNewsletters, events and more, industry leaders rely on Cabling Installation & Maintenance, Lightwave and Broadband Technology Report to provide key details and insights on these rapidly evolving ...
ByPennWell Corporation based in  Tulsa, OKLAHOMA (USA)
Enable advanced plasma processes control via highly accurate power delivery, frequency tuning, and multi-level pulsing. To manufacture leading-edge integrated circuits (ICs), new processes and materials are deployed for transistor or memory cell creation. Declining feature size and atomic-level precision make extreme process control essential. And new device architectures (3D-NAND and Fin FETs) drive multi-patterning (double and quadruple) demand — making innovative etch and deposition processes ...
ByAdvanced Energy Industries, Inc. based in  Denver, COLORADO (USA)