Refine by
Applications
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks solutions for Seepage Water
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Industrial Waste Shredders for Waste to energy
- Moisture sensors for the construction and concrete industry
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for agriculture
- Environmental Technology for Document Destruction
- Water Quality Management Instruments for Textiles Industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for chemical industry
- Continuous emissions monitoring solutions for power plants
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for metals
- Environmental Technology for Waste Disposal
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Water Quality Management Instruments for Reverse Osmosis
- Continuous emissions monitoring for glass manufacturing industries
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Water treatment solutions for cooling water treatment
- Continuous emissions monitoring solutions for waste to energy plants
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Environmental Technology for Paper and Packaging
- Environmental Technology for Disposal of Artificial Mineral Fibres
- Water Quality Management Instruments for Environmental Industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- Water Quality Management Instruments for Oxidation Reduction Potential / Redox
- Continuous emissions monitoring for cement industry
- Water treatment solutions for energy generation industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Air pollution, emission and process monitoring systems for food & pharma
- Environmental Technology for Plastics Recycling
- Flow Solutions for Flow Solutions for Mining & Raw Materials
- Flow Meter Solutions for Pulp & Paper
- Flow Solutions for Power & Energy
- Flow Solutions for Alternative Energy
- Flow Solutions for Cogeneration
Applications Equipment Supplied In Greece
8,785 equipment items found
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
TSI’s P-Trak® Ultrafine Particle Counter offers a new tool for industrial hygiene and exposure monitoring investigations. Using Condensation Particle Counting (CPC) technology, this portable instrument detects and counts ultrafine and ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The RESPICON™ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and respirable. These three size fractions represent the size of particles that ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The 3 and 5 L/min SIDEPAK™ Personal Sampling Pumps weigh as little as 16 oz. All models offer TSI's Smart Battery Management System™ with long-running NiMH or alkaline battery packs and provides precise run time information in minutes remaining. All SIDEPAK pumps are intrinsically safe and ideal for the sampling of aerosols, gases and vapors in hazardous ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The AEROTRAK™ Optical Particle Counter is an addition to TSI’s full line of real-time particle measuring instruments including photometers for mass concentration, condensation particle counters for ultrafine particles and diffusion charging with electrometer signal for surface area measurement. Typical applications include cleanroom monitoring, research, exposure assessment, indoor ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Counting particles emitted from engines is valuable in engine emissions research, and is a critical component in engine type certification according to the Particle Measurement Programme (PMP). The TSI Engine Exhaust Condensation Particle Counter (EECPC) Model 3790A is designed specifically for these needs and satisfies UNECE R83 requirements and is a very valuable tool for any customer who needs ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The Aerosol Electrometer provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5 µm. When paired with a TSI Electrostatic Classifier, the Aerosol Electrometer measures the number concentration of monodisperse aerosol. This configuration is used primarily for calibrating and testing particle instruments like Condensation ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The AEROTRAK Optical Particle Counter is a new addition to TSI’s full line of real-time particle measuring instruments including photometers for mass concentration, condensation particle counters for ultrafine particles and diffusion charging with electrometer signal for surface area measurement. Typical applications include testing, monitoring and certifying cleanroom environments for ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The Particle Size Selector (PSS) Model 376060 allows you to control the lower detection limit of a TSI Condensation Particle Counter ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
If two liquids have to be separated, purifiers (3-phase separators, purifiers) are usually used. They separate liquid phases of different densities from each other and simultaneously separate the remaining fine solid residues. Decades of experience and a quality made in Germany make Flottweg separators high-quality, durable and efficient. Due to their special configuration, Flottweg purifier ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
The self-emptying disc stack centrifuges from Flottweg have the Soft Shot® ejection system as standard equipment in order to carry the separated solids out of the bowl. This solid ejection system allows any combination of partial and full emptying. Depending on the product being processed and the consistency of the solid, adapting the type of ejection provides optimum operation. The ejection ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
From algae harvesting to beer clarification and protein extraction: If you want to separate or purify liquids or remove ultra-fine particles you need strong and robust separators. With their enormous centrifugal acceleration of up to over 12,000 g, Flottweg separators are real purification and clarification all-rounders - highest quality made in Germany. Where decanter centrifuges reach their ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The gold standard in nanoparticle counting for many decades is now updated with newly extended size and concentration range. TSI Condensation Particle Counters (CPCs) are the most referenced, backed up by 40+ years of experience. The 4th generation makes the best CPCs even better: Providing easier use for everyone with an intuitive direct-touch user-interface, new software and secure internal ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Ultrafine particles are omnipresent in our atmosphere, and their number concentration can be very strongly influenced by weather and local particle sources, such as traffic. The Model 3783 Environmental Particle Counter was developed especially for near-freeway monitoring, i.e. continuous observation in high-concentration environments. Based on proven Condensation Particle Counter (CPC) ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
As a first step in harmonizing the measurement of ultrafine particles (UFPs) in the atmosphere, the European Committee for Standardization (CEN) created the Technical Specification CEN/TS 16976. This standard defines a set of requirements for the Condensation Particle Counter (CPC). The CPC Model 3750-CEN is fully compliant with these technical specifications. The new model builds on a ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The specialist for very high concentrations features an extended single particle counting concentration range topped with a photometric mode. TSI Condensation Particle Counters (CPCs) are the most referenced Condensation Particle Counters, backed up by 40+ years of experience. The 4th generation makes the best CPCs even better: Providing easier use for everyone with an intuitive direct-touch ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
This Condensation Particle Counter (CPC) is the long-standing reference for counting ultrafine particles down to 2.5 nm. TSI CPCs are the most referenced Condensation Particle Counters, backed up by 40+ years of experience. The 4th generation makes the best CPCs even better, providing easier use for everyone with an intuitive direct-touch user interface, new software, and secure internal data ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
Disc stack centrifuges are high-speed centrifuges for the mechanical separation and clarification of mixtures comprising solids and liquids. Due to their special design, disc stack centrifuges work at a very high rotation speed. As a result, the centrifugal acceleration (g-force) generated by a disc stack centrifuge is extremely powerful. Moreover, the discs included provide a large clarifying ...
Manufactured by:Flottweg SE based inVilsbiburg, GERMANY
Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: - ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The instrument is used for the accurate determination of the current velocity in water ways, channels, rivers and the sea. The meter can also be applied in polluted water currents. The measurements are executed with the propeller mounted on the rod(s) or connected to a cable. The current velocity meter has a measuring range of 0.025 to 10 ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime sensing, mounted on the stack or duct typically 1m ...