Refine by
Applications Equipment Supplied In Lesotho
376 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. You can easily push the peat sampler into the ground by hand. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The percussion drilling set for heterogeneous soils with RD32 and a gasoline powered percussion hammer (Cobra TT) is standard equipped for drilling to a depth up to 5 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The percussion drilling set for heterogenous soils with RD32 and an electrical percussion hammer HM1812 is used for drilling to a depth up to 5 metres. The set is equipped with extremely sturdy rods and gouges. The different diameters make efficient, fast and light work possible. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Kemmerer water sampler with vertical water bottle can be used for general water sampling in lakes, channels, wells and the sea. Because this sampler consists entirely of plastic parts, there is no danger of the sample coming into contact with ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Meteo station with GP2 data logger for measurement and registration of precipitation, solar radiation, wind speed & direction, soil temperature, rel. humidity and air tempera- ture. Incl. 2 m mast with cross arm, logger canopy and mounting ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Stainless steel wire mesh sieve, Ø 100 mm, rim size (height) 45 mm, aperture 2.0 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Submersible pump "Gigant", ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The one-piece gouge auger set for soft soils is used for sampling to a depth of 1 metre. The set contains two gouge augers with different lengths but the same diameter, and produces undisturbed samples which makes it suitable for various types of profile ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The two-piece root auger is used to take uniform samples (almost undisturbed) in layers of maximum 15 centimetres to a depth of 2 metre. With this root auger, it is easy to take a sample from all non-stony-like soil ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This peristaltic pump suitable for field use (item no.: 1235) is battery-powered and is microprocessor controlled. The microprocessor provides adjustable constant speed, overload protection and various external control functions. A built-in maintenance-free 12 Volt lithium-ion battery (10 Ah) makes it possible to use the pump for two to five hours at a time (depending on the load). The housing is ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The hand penetrometer for top layers is a device that is used to determine the penetration resistance of top layers. Because of the limited overall length of the device, the hand penetrometer can also be used for horizontal measurement, for instance in the walls of profile ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
In principle it is possible to design the soil water permeameters in any required size. The size is determined by the number of soil samples of which the saturated water permeability is to be determined simultaneously. Designs for 5 up to 25 soil sample rings can be supplied. The permeameters are available for soil sample rings with an external diameter of 53 or 60 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This liquid layer sampler is made of transparent PTFE and stainless steel. This makes the sampler especially suitable for marking layers, measuring the thickness of the floating layer and sampling drums, tanks on trucks, gully holes and shallow oil separators. Depth-specific samples can also be ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The liner sampler set for hard soils with screw thread connection allows undisturbed soil samples to be taken in a liner. This is done by applying a stainless steel core sampler with sample tubes and cutting head. In hard soils the sampler tube can be driven into the soil using the shock-absorbing hammer with two nylon heads or the down-the-hole ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Nitrachek reflectometer, measuring range 5-500 ppm with date and time related data storage, with 100 nitrate test strips, calibration solution and accessories in ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The free-fall corer sampler is designed to sample submerged soils/sediments at greater depths, from the bottoms of rivers, lakes, ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Van Veen grab is used for sampling disturbed sediment. This device is used with a rope/cable and is manually controlled. The Van Veen grab is available in four different ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The "Watertrap" water sampler is cable-operated and equipped with drop messenger. With this set, it is easy to determine the sediment load. The set can also be used in waters with high ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The visibility disc according to Secchi is used to measure water transparency or turbidity in bodies of water. This is a simple device to determine the visibility depth. It is lowered in the water with a ...