Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Underwater cleaning solutions for industry sector
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Chromatography laboratory instrumentation for feed industry
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
Applications Equipment Supplied In Libya
879 equipment items found
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Rotork has the experience, know-how and product range to deliver virtually any actuation solution. Rotork products have long been chosen for their reliability and performance. Whilst these proven characteristics are certain under normal operating conditions, there are conditions that not even a standard Rotork actuator can operate in ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
All our Pilot Burners are fuel efficient pilots, self inspirated type, characterized by their durability, reliability, and ease of installation (retractable). Available models are ignited via FFG - flame front generator system (model 245), or HEI - high energy Ignition System HEI (model 250) or combined FFG and HEI (model 255). They can be retractable from ground level (model 270 retrax), and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open flare and designed as natural draft or ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Midland-ACS 3500 Series 3/4" to 1" filters are 316L stainless steel units for filtration of compressed air and gases for the actuation ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The RHS enables safe and secure local monitoring and control of Rotork IQ3 Range actuators installed in inaccessible ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel consumption for economical operation. Primary advantage of the unit ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON’s Jordan Technologies designs and manufactures carbon-based vapor recovery systems for marine-loading operations in both the US and foreign markets. Our intricate knowledge of the design and certification-compliance requirements has made us a preferred provider of US Coast Guard compliant ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Since 1999, AEREON’s Jordan Technologies has designed and delivered Vapor Recovery Systems to marine loading operations for both domestic and foreign markets. In order to comply with all of the United States Coast Guards’ (USCG) rules and regulations, a vast knowledge of marine loading applications is needed to safely design a carbon based Vapor Recovery System. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct thermal oxidizer (1400° F - 1800° F). Destruction ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
In these days the importance of saving water is steadily incThe U-DEC is designed to remove radioactive aerosols from the walls and the bottom of the reactor tank. This cleaner is developed in coope54ration witth Westinghouse Electric in Sweden. It is easily controlled by a remote ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
The Weda B600 has been the flag ship in the Weda range of cleaners since 1981. It has over the years been upgraded with new electronics and material to meet the demands in the changing pool market with various sizes and shapes of pools. It has been the selected cleaner in several Olympic games. The B600 is delivered with a trolley with a built-in safety transformer that supplies safe 42 V to the ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
This cleaner has been designed in cooperation with Mainstay A/S, the worlds leading supplier of cleaners for fish net production plants. With the current development in the aquaculture market the demand for alternatives to net production facilities is growing fast. The Mainstay_Weda offers a cleaning solution for the new type of production plants may the be floating or on-land facilities. ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
Skimming of slow sand filters without emptying has long been a request from the water market. Weda is now launching a remote-controlled robot that can run on the sand bed and remove the so-called schmutzdecke and pump it to the desired landfill. The machine sucks in 1- 3 cm of schmutzdecke and the sand that is pumped out of the slow filter. The method also works on facilities with infiltration ...
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
The YT-800 is an electricity-operated remote controlled submersible robot for cleaning large underwater surfaces, such as the bottom of a sand filter. The powerful pump and wide nozzle make it possible to clean large areas in a relatively short time. The sediment is pumped through a hose to a designated point of discharge, such as a sand treatment station. Traditional cleaning using loading ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...