Refine by
Applications
- Geosynthetic Material for Ground Engineering
- Geosynthetic Material for Hydro
- Geosynthetic Material for Ports and Aviation
- Geosynthetic Material for Power and Mining
- Geosynthetic Material for Coastal Protection, Marine Structures & Pipeline Protection
- Geosynthetic Material for Fencing & Wire Fencing & Wire
- Geosynthetic Material for Hydraulic Works
- Geosynthetic Material for Retaining Walls & Soil Reinforcement
- Geosynthetic Material for Drainage of Tunneling
- Gas Analysers for Inert Gas Blanketing
- Gas Analysers for Heat Treatment
- Gas Analysers for Additive Manufacturing Sector
- Gas Analysers for Analysis in Hydrogen Production
- Gas Analysers for Ceramic Capacitors
- Geosynthetic Material for Waste Management
- Geosynthetic Material for Erosion Control
- Tunnel solutions for the gaseous pollutants
- Gas Analysers for Renewable Energy
- Gas Analysers for Electrical Industry
- Gas Analysers for Medical Industry
- Stack emissions monitoring
- Tunnel solutions for the extractive areas
- Geosynthetic Material for Roads and Highways
- Industrial monitoring solutions for the gas analysers areas
- Geosynthetic Material for Landscaping and Sports Infrastructure
- Geosynthetic Material for Railways
- Geosynthetic Material for River and Flood
- Elemental analysis for the agriculture industry
- Elemental analysis for the energy industry
- Tunnel solutions for the visibility monitor areas
- Tunnel solutions for the light sensors
- Analytical Instruments for Oil and Gas Industry
- Analytical instruments for pharma & life science industry
- Gas Analysers for Solder Reflow Oven
- Analytical Instruments for Wastewater Analysis
- Analytical Instruments For Soil And Sludge Analysis Applications
- Analytical instruments for analyzing refinery products
- Analytical Instruments for Chemical Analysis of Biofuels and Synthetic Fuels
- Analytical instruments for analyzing petrochemicals
- Geosynthetic Material for Agriculture
- Geosynthetic Material for Defence
- Geosynthetic Material for Industries and Buildings
- Geosynthetic Material for Oil & Gas /Energy
- Geosynthetic Material for Environment, Dewatering & Landfills
- Geosynthetic Material for Landscape & Architecture
- Geosynthetic Material for Drainage of Soil Stabilisation & Pavements
- Industrial monitoring solutions for the opacity and dust monitoring areas
- Industrial monitoring solutions for the flue gas desulphurisation areas
- Industrial monitoring solutions for the de-NOx plants areas
- Fire detection solutions for the power stations sector
- Tunnel solutions for the tunnel air flow
- Elemental Analysis for the Chemistry & Materials Industry
- Gas Analysers for Blue Hydrogen Analysis
- Gas Analysers for Green Hydrogen Analysis
- Analytical instruments for food processing & packaging applications
- Analytical Instruments for Analysis of Soils and Fertilizer
- Analytical Instruments for Analyzing by-Products, Effluents and Waste
- Geosynthetic Material for Environmental
- Geosynthetic Material for Basal Reinforcement
- Geosynthetic Material for Drainage of Structures
- Geosynthetic Material for Rockfall Protection & Snow Barriers
- Geosynthetic Material for Safety & Noise Barriers
Applications Equipment Supplied In Nepal
178 equipment items found
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
CyBio FeliX is using CyBio RoboTipTrays for highly parallel pipetting in 96-, 384- and 1536-well format, as well as CyBio TipBoxes for flexible pipetting in single wells or columns and rows. CyBio RoboTipTrays offer High Troughput Screening proven Tip Sealing Technology. Several tip types with and without filter cover a volume range from 0.5 µl to 1000 µl. Customer-specifically racked ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
The wash stations actively flush pipette tips inside and out, tips in the 96 and 384 format can be washed automatically with pump-supported (active) inflow and drain. This results in a considerably reduced requirement of disposables. The inflow and drain of the liquids is performed by peristaltic pumps, which can be attached to an external module or a ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
The CyBio system for heating and orbital mixing of reagents is the fully automated solution for incubating and denaturation of substances in the temperature range from ambient to 99 °C. An optimum heat transfer is realized through specific plate adapters, furthermore the Edge Locking Mechanism (ELM) guarantees the repeatable and accurate positioning of microplates. Controlled via RS232 and a ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
Thanks to its unique instrument design and stable plasma flame, the PlasmaQuant 9200 series offers not only the highest resolution and best detection limits for any sample type, but also the smallest instrument footprint. In combination with unmatched reliability and easy handling, Analytik Jena's new ICP-OES instrument will be the key for your successful ...
Premium
Manufactured by:Analytik Jena - Lab-loving people  based inJena, GERMANY
Universal use for the following applications: Semi-dry blotting, tank blotting, capillary blotting, gel drying, gel wicking, ...
Manufactured by:Durham Geo Slope Indicator (DGSI) - part of Nova Metrix LLCÂ Â based inTucker, GEORGIA (US) (USA)
The SRX is an air-powered pump used to extract ground water or total fluids at variable rates equal to the well recharge rates. The SRX is available in a 1.75in OD or 3.5in OD for use in 2” and 4” wells. Pump flow rates are up to 9.5 gpm. The SRX pump is available in top loading for recovering total fluids or bottom loading for dissolved phase and higher pumping ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
For rugged industrial oven applications, Sensotec has a range of special stainless measurement probes for insertion into a hot atmosphere through a thick wall of an oven. The zirconia sensor is housed in a specially constructed stainless sheath with the sensor tip housed in a recessed end housing for protection. The probe is 50cm long and is either welded to a standard size DN / ANSI flange or ...
Manufactured by:Codel - a Forbes Marshall company  based inBakewell, UNITED KINGDOM
The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be verified automatically or manually on demand by the ...
Manufactured by:Codel - a Forbes Marshall company  based inBakewell, UNITED KINGDOM
The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not only an accurate average of the dust loading, but ...
Manufactured by:Codel - a Forbes Marshall company  based inBakewell, UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been utilised to produce this advanced technology gas ...
Manufactured by:Codel - a Forbes Marshall company  based inBakewell, UNITED KINGDOM
The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, infrequent probe cleaning and low installation ...
Manufactured by:Codel - a Forbes Marshall company  based inBakewell, UNITED KINGDOM
The TunnelTech 102 Cold Smoke Monitor (CSM), is an essential part of any road (or rail) tunnel safety system, the CODEL CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the focus of the fire if it is also equipped with the optional PT 101 temperature sensor to accurately ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
The Rapidox 1100-B carbon monoxide (CO) gas analyser is the company’s most cost-effective and versatile range of CO gas analysers fitted with an infra-red gas ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
The Rapidox 1100-Q helium (He) gas analyser is the company’s most cost-effective and versatile helium gas analyser fitted with a Thermal Conductivity gas ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
The Rapidox 1100-H hydrogen (H2) gas analyser is the company’s most cost-effective and versatile hydrogen gas analyser fitted with a Thermal Conductivity gas ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
The Rapidox 1100-M methane (CH4) gas analyser is the company’s most cost-effective and versatile range of CH4 gas analysers fitted with an infra-red gas sensor or a tuneable laser diode sensor depending on the ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
For users who require a permanent printed record of their test data, we offer an optional thermal printer accessory that connects to the Rapidox instrument via the serial port on the rear panel. Available in both battery (AA-size) and mains powered format, the printer comes supplied with thermal paper on a roll which is a standard product used in tills and printers throughout the ...
Manufactured by:Cambridge Sensotec Limited  based inSt. Ives, UNITED KINGDOM
Cambridge Sensotec supplies bespoke gas calibration kits for our O2 and SF6 gas analysers, as well our gas detection & MAP product ranges. Each kit has the appropriate calibration gases and flow regulator supplied in a convenient carry/storage ...