Refine by
Applications Equipment Supplied In Rwanda
406 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The pump is not sensitive to polluted water and the ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Monitoring well datalogger type Cera-Diver for measuring and recording groundwater levels/temperatures. Range 100 m, -20 till +80 °C. Memory 48000 measurements. Dimensions 22 x 90 mm. Pressure sensor/housing: ceramic. Accuracy 0,05%/100 m, + 0.1 °C, temperature compensated 0/+40 °C. Warranty 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 50 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 100 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The conveniently priced Baro-Diver water level logger has also been equipped with the new technologies. The Baro-Diver ensures that you accurately capture changes in atmospheric pressure. Conveniently priced and easy to deploy, one Baro-Diver covers a radius of up to 15 km, depending on the topography. The Baro-Diver can also be used for measuring shallow water levels up to approximately 0.9 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Monitoring well datalogger type Micro-Diver for measuring and recording groundwater levels/temperatures. Range 100 m, -20 till +80 °C. Memory 48000 measurements. Dimensions 18 x 90 mm. Pressure sensor: ceramic. Housing: stainless steel 316L. Accuracy 0.15%/100 m, + 0,1 °C, temperature compensated 0/+40 °C Warranty 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Pressure membrane extractor for maximum 15 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Standard AGR/GPS (24V) to send obligatory data to "Dienst Regelingen", inclusive PSION Pro, GPRS modem, GPS and power ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The profile auger is used to take a large and virtually undisturbed sample to a depth of 40 centimetres (10 centimetres wide and 5 centimetres in diameter). All roots up to 2 centimetres in diameter are included in the ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The peat profile sampler, type Wardenaar, is an apparatus for sampling intact, undisturbed peat profiles in peat lands up to a depth of 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Bottom part for sampling peat, equipped with conical screw thread connection. The operational length is 50 cm, with a capacity of approximately 0.5 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The sediment level stave is part of the standard set to measure the depth of sediment down to a depth of 4 metres. A sediment level stave is a sounding rod used for sounding the sediment layers in surface waters. Either a point or a sediment grid can be mounted to the ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Stainless steel wire mesh sieve, Ø 200 mm, rim size 50 mm, aperture 0.038 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The gouge auger set for stepwise sampling is used for profile research (nitrate research) in soils with a somewhat higher penetration resistance. The set contains three two-piece gouge augers with different ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The grass plot sampler has a 23-mm diameter and is used as a gouge auger set for top layers. The grass plot sampler has an operational length of 5 or 10 centimetres, and a total length of 95 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Handle part for various augers has a length of 60 cm and has a bayonet or conical thread connection. The upper part has a T-shaped handle and is available in several variants. It can be combined with various hand ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Hellige pH-indicator for soil, measuring range pH4 - pH9, (inclusive 50 cc indicator fluid, for about 50 pH-tests). ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The air pycnometer is supplied as a complete set, including a calibration block. The apparatus is suited for sample rings with a maximum diameter of 53 or 60 mm (max. height 51 resp. 40 mm). The instrument has a measuring range of 0-115 cm3. The time period of the measurement is approximately 1 minute. The maximum measuring accuracy equals ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Sample ring kit model C53 has a closed sample ring holder for sampling in medium to hard soils. This is a standard set for a depth of 2 metres. The kit is used for soil sample rings with a diameter of 53 millimetres. Soil sample ring kits are used for a variety of tests, including bulk density determination of ...