- Home
- Services
- canada alberta
- applications
Refine by
Applications
- Waste Gas Incineration for the Air Pollution Treatment Industry
- Solid Waste Incineration for the Municipal Waste Industry
- Wastewater Aeration for Contractors
- Workplace Safety Solution for Chemical
- Workplace Safety Solution for Radiological
- Workplace Safety Solution for Gas Detection
- Workplace Safety Solution for Mining Safety
- Wastewater Aeration for Consulting Engineers
- Wastewater Aeration for Municipal Facilities
- Onsite oxygen generation systems for aquaculture industry
- Onsite oxygen generation systems for water treatment industry
- Onsite oxygen generation systems for wastewater treatment industry
- Onsite oxygen generation systems for medical industry
- Onsite oxygen generation systems for mining industry
- Onsite oxygen generation systems for pulp and paper industry
- Onsite oxygen generation systems for agriculture industry
- Wastewater Aeration for Pulp and Paper Industry
- Wastewater Aeration for Sugar Industry
- Wastewater Aeration for Petroleum Industry
- Wastewater Aeration for Meat and Protein Industry
- Wastewater Aeration for Food Processing Industry
- Wastewater Aeration for Pharmaceutical Industry
- Wastewater Aeration for Wine Industry
- Wastewater Aeration for Distilling Industry
- Commodity trading and risk management software solutions for food industry
- Commodity trading and risk management software solutions for sugar sector
- Commodity trading and risk management software solutions for dairy sector
- Commodity trading and risk management software solutions for bio-fuels industry
- Commodity trading and risk management software solutions for ores and concentrates industry
- Commodity trading and risk management software solutions for LME traded base metals industry
Applications Services In Alberta
1,663 services found
Manufactured by:Claytek, Inc. based inEdmonton, ALBERTA (CANADA)
Claytek specializes in removal of difficult to treat contaminants in wastewaters or groundwater and can configure an economical solution tailored to treat a wide array of inorganic and organic contaminants. For traditional pump-and-treat projects, our products can also enhance your current treatment approaches. For example, ORGANOCLAY PM 199 media can be used as a pre-filter before the granular ...
Manufactured by:Claytek, Inc. based inEdmonton, ALBERTA (CANADA)
We provide the highest-quality VOLCLAY bentonite from the largest reserves in the world. When VOLCLAY bentonite soil sealants are mixed with soil and hydrated, the bentonite fills the voids between soil particles. This creates a barrier that effectively stops further seepage through the soil. Because of the high swelling capacity of VOLCLAY bentonite soil sealants, only a small amount is needed ...
Manufactured by:Clean Flo Water Technologies based inCraik, SASKATCHEWAN (CANADA)
We offer professional design and consulting services for rainwater harvesting systems on residential projects. We specialize in rainwater harvesting systems that are used for irrigation, toilet, laundry, potable drinking water, fire suppression and storm water management. ...
Manufactured by:Clean Flo Water Technologies based inCraik, SASKATCHEWAN (CANADA)
We have multiple options to provide a professional installation of your storm water or rainwater harvesting ...
Manufactured by:Clean Flo Water Technologies based inCraik, SASKATCHEWAN (CANADA)
We offer maintenance services for both storm water and rainwater harvesting ...
by:Weatherford based in, ALBERTA (CANADA)
As a leading oilfield services provider, we intimately understand the importance to deliver consistent quality products and services to our clients. We invest in ongoing training and competency assurance of our people, and have an industry-leading operational management system (OEPS) that equips them with the tools and resources needed to conduct each job safely and ...
by:Weatherford based in, ALBERTA (CANADA)
Our Four Tenets program encourages employees to take an active role through better management of our waste, water, land, and energy resources ranging from raising awareness to the simple actions we can take each day to make a difference, to more robust technical solutions. These environmentally conscious standards enable us to make the right choices and are directly related to the sustainability ...
Manufactured by:Boreal Laser Inc. based inEdmonton, ALBERTA (CANADA)
Boreal Laser personnel is available to remotely monitor the performance of individual GasFinder units daily. If Boreal Laser is not able to login remotely via ethernet or LAN connection then a Remote Monitoring + Control Centre can be utilized for remote communication (Cellular + Radio) and intervention to many different components. The Remote Monitoring + Control Centre can collect and store ...
Manufactured by:Boreal Laser Inc. based inEdmonton, ALBERTA (CANADA)
Has it been awhile since anyone has looked at your GasFinder’s? It isn’t a bad idea to get one of our factory trained technicians to give your system a check-up to make sure it is performing as best as it can. Our “recommended” service interval for our analyzers is every two years and the “recommended” calibration cycle is every 5 years. Are you hesitating to ...
Manufactured by:Boreal Laser Inc. based inEdmonton, ALBERTA (CANADA)
Do you need some assistance with the design and integration of your installation? It doesn’t hurt to get advice from the experts. There are a couple tricks-of-the-trade that we’ll learnt over the years that ensure your equipment is installed, commissioned, operated, and maintained as best as ...
Manufactured by:Westland Environmental based inEdmonton, ALBERTA (CANADA)
Westland’s manufacturing team is a group of engineers, draftsmen and tradespeople who are constantly pushing to develop better, more efficient incinerators. We have established original equipment manufacturer (OEM) supply agreements with strategic suppliers to maintain a consistency of ...
Manufactured by:Westland Environmental based inEdmonton, ALBERTA (CANADA)
We offer incineration as the preferred disposal method through. Proven equipment performance and supporting technical services over the long term. Enabling source separation and diversion options as part of the solution to target zero waste. Tracking environmental indicators against stakeholder interests. Ensuring self-contained operation and maintenance, and. Meeting all environmental approvals, ...
Manufactured by:Westland Environmental based inEdmonton, ALBERTA (CANADA)
Waste incineration is the thermal oxidation of combustible matter with oxygen (from air) at sufficient temperatures to ignite the waste. The combustion design also generates heat sufficient to destroy volatile contaminants in the hot gases before being emitted through the stack. Cyclonator incinerators can be modified to recover energy contained in the waste ...
Manufactured by:Hard Metals Australia Pty Limited (HMA) based inEastern Creek, AUSTRALIA
HMA now manufactures industrial products ...
Manufactured by:Westland Environmental based inEdmonton, ALBERTA (CANADA)
Heating value, calorific value and heat of combustion are synonyms that quantify the heat released by the combustible component in the waste. This value is needed to maintain the incinerator’s loading rate at its design capacity. An understanding of the concept can be gained from the hypothetical processes shown ...
Manufactured by:SCADACore based inCalgary, ALBERTA (CANADA)
SCADACore Regulatory Flow Monitoring meets all of the Directive 17 / AER reporting requirements and continue to work closely with other regulatory bodies to ensure our compliance to their ...
Manufactured by:SCADACore based inCalgary, ALBERTA (CANADA)
SCADACore’s Collect live plugin driver system can quickly integrate new plunger-lift systems at no cost to the producer or integrator. Full control and live view of the plunger enables technicians to remotely monitor and tune their plunger-lift ...
Manufactured by:SCADACore based inCalgary, ALBERTA (CANADA)
The records made by any dynamometer can be retrieved by SCADACore and aggregated into a single dashboard along with production data. With SCADACore’s dashboard, dynamometer surveys can be analyzed to reveal a defective pump, tubing leaks, excessive vibration, or other ...
Manufactured by:SCADACore based inCalgary, ALBERTA (CANADA)
SCADACore provides tank monitoring for both hazardous and non-hazardous locations. With a concentrator model, hundreds of tanks within a tank farm can be monitored. ...
Manufactured by:Daemar Inc. based inOakville, ONTARIO (CANADA)
At Daemar our business is much more than simply providing products; we work with our customers to deliver Supply Chain solutions that meet their specific challenges. Daemar has developed all of the capabilities required to support our customers’ Lean Manufacturing initiatives – providing JIT delivery, vendor managed inventories and computer systems ...