Refine by
Applications
- Data integrity, regulatory compliance solutions for pipette user training sector
- Carbon footprinting calculations for environmental management
- Water treatment solutions for the industrial waters sector
- Flood Defense Barriers for Flood Walls
- Flood Defense Barriers for Protective & Reinforced Berms
- Flood Defense Barriers for Ponds & Water Retention
- Flood Defense Barriers for Erosion Control
- Flood Defense Barriers for Road Construction
- CSols Solutions for Water and Environmental Laboratories
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Water Treatment Solutions for Waste Water Industry
- Water Treatment Solutions for Power Generation Industry
- Water Treatment Solutions for Refineries Industry
- Water Treatment Solutions for Industrial Processes Sector
- Water treatment solutions for Chemical Plants Industry
- Water treatment solutions for Drinking Water Industry
- Environmental Data Monitoring Solutions for Environment
- Environmental Data Monitoring Solutions for Indoor Air Quality
- Environmental Data Monitoring Solutions for Industrial Hygiene
- Environmental Data Monitoring Solutions for Air Quality and Emission
- Environmental data monitoring solutions for Research
- Environmental Data Monitoring Solutions for Controlled Atmosphere
- Data integrity, regulatory compliance solutions for diagnostics sector
- Software Solutions for Energy & Renewable
- Leak Detection Solutions for Others
- Hygiene Awareness Educational Program for Promote Hand Hygiene and Water Conservation
- Building & Processes Solutions for Buildings & Facility Management
- Sparkling New Drinking Solutions for the Office
- Water & Pumping Solutions for Water Management
- Water & Pumping Solutions for Irrigation
- Pellets and granulates solutions for feedstuff sector
- Pellets and granulates solutions for renewable raw materials sector
- Pellets and granulates solutions for recycling industry
- Measurements Solutions for Research
- Measurements Solutions for Start Up
- Micro-Hydro Turbines for Hydraulic Power
- Workplace Safety Solution for Chemical
- Workplace Safety Solution for Radiological
- Workplace Safety Solution for Gas Detection
- Workplace Safety Solution for Mining Safety
- Software Solution for Healthcare
- Natural Isotope Solution for Groundwater
- Natural Isotope Solution for Mineral and Medicinal / Spa Water
- Natural Isotope Solution for Tracer Tests
- Natural Isotope Solution for Geothermal Energy
- Natural Isotope Solution for Food
- Wastewater Aeration for Pulp and Paper Industry
- Wastewater Aeration for Dairy & Cheese Industry
- Wastewater Aeration for Sugar Industry
- Wastewater Aeration for Petroleum Industry
- Wastewater Aeration for Meat and Protein Industry
- Wastewater Aeration for Food Processing Industry
- Wastewater Aeration for Pharmaceutical Industry
- Wastewater Aeration for Wine Industry
- Wastewater Aeration for Distilling Industry
- Wastewater Aeration for Contractors
- Waste reduction equipment solutions for agricultural industry
- Electric Repair and Construction Services for Commercial
- Electric Repair and Construction Services for Hospital/Patient Care
- NeuroHeal Pro
- Cured-in Place Pipe Lining Solutions for Municipalities
- Cured-in Place Pipe Lining Solutions for Engineering Officers
- Cured-in Place Pipe Lining Solutions for Government Officials
- Cured-in Place Pipe Lining Solutions for Contractors
Applications Training Courses Near Swaziland
6,271 training items found
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
At INCINER8 we offer a range of in-house incinerator training sessions that allow you and your team to be fully confident in the operation and routine maintenance of your incinerator. Once we have your information we guarantee to respond to your requirements within 24 hrs, one of our team will contact you and confirm your training dates and ...
by:Clarke Energy based inLiverpool, UNITED KINGDOM
The availability and reliability of power generating equipment is central to your plant's efficient operation. To ensure optimum operation and maintenance, you need a dedicated team of trained staff. Clarke Energy offers specialised customer-orientated training programmes for beginners and experienced service technicians alike. Customers, service providers and other stakeholders can participate ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Our experts can train you at your site or organize events and company seminars. Basic training includes: Environmental and personnel monitoring. Cleanroom behavior and best practices. Cleaning and disinfection strategy. Good Distribution Practices (GDP). Microbiological laboratory best practices. Qualification vs. ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Monitoring of nonviable and viable particles in a cleanroom is critical to meet regulatory requirements. An environmental monitoring system effectively collects, manages and reports on data from both types of sensors. Total particle contamination is a mixture of nonviable and viable particles. Historically, nonviable particles are monitored continuously while viable particles have been monitored ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Download this On Demand webinar to learn about and compare various VBNC detection methods including: Direct counting methods, Dye reduction tests, Immunological-based methods, Genetic methods, ATP bioluminescence, Fluorescent labeling methods, Optical ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
ISO 21501-4 has two main goals; to improve instrument-to-instrument data correlation and count accuracy, and to enhance compliance with ISO ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The recently revised United States Pharmacopoeia (USP) chapter Microbial Control and Monitoring of Aseptic Processing Environments Chapteris arguably one of the most comprehensive informational chapters from the USP, and it is particularly challenging due to its proposal regarding measurement of microbial contamination based on Contamination Recovery Rates (CRR) rather than the conventional ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Over the last five years, the ISO Technical Committee 209 has been working on the revision of the basic airborne cleanliness classification, 14644-1 and ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Decreasing the time to detect, contain and mitigate very low levels of Airborne Molecular Contamination (AMC) is critical for high tech manufacturers. Costs associated with AMC-related quality issues and yield losses are well understood, and adequate reduction of AMC is critical for clean manufacturers to stay competitive. Technical personnel need the flexibility to efficiently collect AMC data ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Performance trends in the optics industry are driving manufacturers to reduce contamination to levels which a component is exposed during manufacturing including cleaning, handling, coating and assembly. Quality control can be compromised through component exposure to particulate and molecular contamination, affecting laser damage thresholds in coatings, yields in nano-optics and LED production, ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Chemical quality monitoring programs includes data gathered from the time chemicals are received all the way to the point of process. This may involve the use of grab samples and offline particle contamination monitoring to understand chemical quality. Establishing a well-controlled sampling protocol that does not contaminate the fluid and produce false positives is critical for successful grab ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The best way to locate sources of contamination is via risk assessment, best performed before a process has been implemented. There are multiple tools to assist in completing a risk assessment, and once completed, it is imperative to continually update this body of knowledge to guarantee a defensible monitoring program is developed and ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Control of the environment in which pharmaceutical products are manufactured is a key element of Good Manufacturing Practices (GMP). Monitoring of particles & microorganisms in manufacturing cleanrooms, Restricted-Access Barrier Systems (RABS), and isolators consists of clearly defined components. Absence of viable and non-viable contamination is considered a critical quality attribute due to ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
On December 20th, 2017, the draft for a Revision of ANNEX 1 (“Manufacture of Sterile Medicinal Products”) of the EU Guideline for GOOD MANUFACTURING PRACTICE for drug products and drug substances was published. This updated guidline will set a milestone for adjustments needed within European agencies overseeing drug products regulatory applications. During the creation process, the ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
ISO 14644-2:2015 is not only a new standard with which to be compliant, but is also a beneficial tool to use in achieving mature cleanroom environmental control. After the recent release of the ISO 14644-1:2015 Revision Summary and Understanding ISO 21501-4 application notes, Particle Measuring Systems continues the ISO Standards interpretation series of documents with the evaluation of the newly ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Managers need the assurance that the surfaces in their facilities are aseptic. Gaining that knowledge in a fast and accurate way that also provides results for all surfaces, even and uneven, is a challenge. This webinar helps you identify which critical surfaces you should be monitoring, and discusses and compares various solutions. A new approach to rapid microbial monitoring will also be ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Personnel pose the greatest risk of false positives in aseptic processing. Investigations are required when microbial activity is detected, costing per investigation and the risk of batch loss. The BioCapt® Single-Use eliminates false positives and costly investigations by preventing direct operator contact with the media plate. The innovative design combines the media plate and sampling head ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The current trend in Environmental Monitoring Systems (EMS) is to focus on data integrity by using an industrial automated solution instead of the older PC based approaches. PC-based Environmental Monitoring Systems were common in the late 1990 and early 2000s and were the preferred solution because they cost less upfront and have reduced installation times compared to Automated Control ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Quality by Design (QbD) is a well-known concept in the pharmaceutical industry to increase the overall quality of pharmaceutical drugs and increase patient´s safety. Controlling the quality of air inside an environmental monitoring program is a vital aspect of managing the risk towards the ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Environmental Monitoring Risk/Gap Analysis: Define or review the monitoring sampling points for your environment with a scientific and risk-based ...