- Home
- Applications
Refine by
Xprt Product Applications For The Aerospace Air Transport Industry
156 applications found
Premium
ByApex Engineering Products Corporation based in Aurora, ILLINOIS (USA)
Premium
Aircraft Maintenance Visual Inspection: Quality assurance in aerospace manufacture and maintenance is becoming increasingly important. These inspections require the use of aviation borescopes to allow inspector engineers to properly and thoroughly assess areas, like turbines, combustion chambers, low/high-pressure compressors, etc. Aircraft have been required to have on-condition maintenance performed, which relies on the capability to detect failures before they happen, so preventive maintenance can be initiated. ...
ByFIBERSCOPE.net based in Winnipeg, MANITOBA (CANADA)
Premium
Brentwood partners with heavy truck and mass transit manufacturers to produce lightweight, cost-effective components that are designed for structural integrity and long service life. These parts range from detailed interior components to extra-large exterior assemblies. Over 40 years of custom forming expertise yields durable and aesthetically appealing components for automotive, heavy truck, and mass transit ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
Premium
Mantec’s products meet stringent performance and reliability requirements while delivering value to our customers. In the aerospace industry our filtration products ensure the integrity of high performance investment castings. Within the defence industry Mantec offers filtration solutions that guarantee safety, long service life, reliability and cost effective operation in the most demanding ...
ByMantec Technical Ceramics Ltd based in Stoke-on-Trent, UNITED KINGDOM
Premium
Our Envirotac line of polymers are strong enough to be a runway with in-situ soils. Envirotac is often used for Airfield taxiways and runway shoulders at existing airfields. So if controlling dust and debris is a concern, Envirotac is the right solution. Treated areas will eliminate FOD and build a platform strong enough for airplanes and airport equipment to traverse ...
ByEnvironmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA)
Premium
When our products bond with the soil particles it can create a tough durable surface that will withstand heavy loads and adverse weather conditions. It can work better than conventional methods at a fraction of the cost. The time frame required to implement the Envirotac Product Line of polymers is greatly reduced compared to traditional methods. This allows the runway to be used ...
ByEnvironmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA)
Premium
High pressure mass flow controllers are used extensively in annealing dissimilar materials together leading to the development of advanced composites for ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
Fish welfare and efficient operations. Our sensors are your eyes below the water, whether or not you are able to go to site. We give you the data you need to manage the site efficiently with our aquaculture monitoring ...
ByAanderaa, a Xylem Brand based in Nesttun, NORWAY
Premium
Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development and ...
ByAMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA)
The aviation industry has recently become a focus for reducing emissions, due to the huge amount of CO2 and other pollutants produced by burning kerosene. Whilst various technologies are being considered to replace kerosene combustion engines, there is a growing consensus that for planes up to regional aircraft size ...
ByIntelligent Energy (IE) based in Loughborough, UNITED KINGDOM
TTEC manufactures T/C's & RTD's for a variety of Aircraft & Aerospace Applications, including Test Stands, Environmental Chambers and Heat Treating Furnaces for Aircraft Components. NIST Traceable calibration tests and material tests reports are available as required. TTEC Style 8012 RTD's with DIN Class A special accuracy are use to precisely measure Environmental Chamber Temperatures. These Chambers re-produce in-flight conditions that aircraft parts will be exposed to. Accurate & Stable readings ...
ByThermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA)
The UVD Robot can disinfect larger areas such as airports and other transport stations. Keep the travelers safe by having a clean environment during ...
ByUVD Robots, PART OF BLUE OCEAN ROBOTICS based in Odense, DENMARK
Many Aerospace & Defense applications are custom designed around rotating machinery measurements for specific needs. Transmit temperature, strain, pressure, vibration and torque measurements off of the shaft using single or multi-channel digital wireless techniques. ...
ByAccumetrics, Inc. based in Latham, NEW YORK (USA)
When your industry relies on steady performance, availability and reliability, high quality air filtration is critical to maintain your equipment in top condition for many ...
ByModern Air Filters Corporation based in Brampton, ONTARIO (CANADA)
The coatings, oils, coolants, and lubricants involved in aerospace and defense manufacturing can be challenging to manage. When you can’t reliably clean up your wastewater and fluids, you’re in constant peril: missed deadlines, strained budgets, rejected ...
ByTrucent based in Dexter, MICHIGAN (USA)
ByRegScan - by Enhesa based in Williamsport, PENNSYLVANIA (USA)
For aerospace-industry enterprises STEKLONiT offers fiberglass fabrics for the production of composite products. Using STEKLONiT’s products enables development of individual airplane designs with augmented safety, durability, lighter weights as compared to customary materials. Using composites in aircraft and helicopter engineering even now is a guarantee for manufacturers of not only improved technical performance of airplanes and helicopters, but also significant fuel saving and possibility to extend ...
BySteklonit JSC based in Moscow, RUSSIA
Elemental analysis is a generic term for a group of applications which deal with the analysis of a variety of materials (chemicals, liquids, polymers, waste material, etc.) for their elemental or isotopic properties. Typical examples of elemental analysis techniques where mass flow control plays a key role are Total Organic Carbon (TOC) or Total Organic Halides ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
We have been able to expand into a segment of aviation industry due to long-time development of specific processes, which had been developed in automotive industry under the strictest quality requirements in accordance with the ISO/TS 16949 standard, due to upgrading our know-how, successful digitization of the company, and due to transition to smart forging ...
ByMarovt d.o.o. based in Stranice, SLOVENIA
In every aspect of design specification whether it be on Airframe fuel systems or engine fuel systems the aviation industry knows that one of its biggest problems is ingress of moisture / water, as it can and does lead to catastrophic failures in aircraft ...
ByCoval Aquasolve Limited based in London, UNITED KINGDOM