- Home
- Equipment
- botswana
- applications
- undefined
Refine by
Applications
- Water monitoring instruments for surface water monitoring
- Water monitoring instruments for groundwater monitoring
- Surface water quality testing for the environmental monitoring industry
- Water monitoring instruments for water quality monitoring
- Water quality monitoring for the groundwater monitoring industry
- Wastewater testing for the water treatment industry
- Low flow sampling, methodology for groundwater sampling
- Dust control solutions for mining industry
- Dust control solutions for municipal industry
- Dust control solutions for construction industry
- Dust control solutions for agriculture industry
- Dust control solutions for other applications
- Water monitoring by early flood warning system
Undefined Equipment Supplied In Botswana
605 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Measuring instrument with manometer for measurements till maximal 1000 N/cm2. Inclusive calibration certificate. The advised measuring range with an accuracy of +/- 8 % is between 200 and 700 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Probing rod, Ø 8 mm, length 100 cm (for cone ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Flightcase for hand penetrometer (0601SB), dimensions 60x40x18cm ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Water sampling and field analysing set, complete standard ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 1 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Floating layer thickness meter for detection of floating- and sinking layers of hydro-carbons, acoustic- and light signal, electrode Ø 16 mm, 30 m tape with mm graduation, inclusive carrying bag. CSA certified for class 1 groups C and D locations till 50 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
A sounding device is really just a small tube, closed on one side, with a diameter of 17 mm. When the open bottom touches the liquid level at a fair speed, a “plopping” sound can be heard. In normal conditions the sound is clearly audible until a depth of 10 meters. When it has reached its depth, the device is moved up and down over short distances for a more accurate level ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Turbidimeter TurbiCheck. Light source infrared light, measurement by the intensity of scattered light at an angle of 90 degrees, digital readout. Measuring range 0.01-1100 TE/F or FNU/NTU. Battery powered. Complete in case. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete set. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Evaporation pan, class A, standard set. The class-A evaporation pan is used to determine the evaporation rate of open ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Reflecto meter RQ-flex for the measurement of various anion and cation in soil, water, compost, (pressed) plant material, substrates, etc. LCD display, portable, for use in the field, incl. batteries and accessoires in synthetic case, excl. test ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Thetaprobe soil moisture measuring set. Complete standards set consisting of soil moisture meter (read-out unit), Thetaprobe sensor, adjusting block for installation of sensor, set of 12 pieces spare pins for sensor and carrying case. Warranty 5 years. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil moisture meter to read out the Thetaprobe, the W.E.T. sensor, the profile probe and the SM300 soil moisture sensor. With 25-way D socket. Inclusive operating instructions, PC software and RS 232 cable. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Eijkelkamp penetrologger CBR measures by a static penetration test directly CBR values using the standard CBR cone. The standard California bearing ratio (CBR) is a penetration test for evaluation of the mechanical strength of road subgrades and basecourses. The CBR is the basis for determining the thickness of soil and aggregate layers used in the design of roads and airfields. A ...