- Home
- Equipment
- egypt
- applications
- undefined
Refine by
Applications
- Level Sensors Simplify Inventory for Food Processors
- Solutions for Real-Time Bulk Material Inventory for Cement
- Solutions for Bioenergy
- Solutions for Mining Industry
- Solutions for Precision Plastic Resin Inventory for Silos
- Solutions for Digitize Agriculture Inventory
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Heat transfer products solutions for the industrial process sector
- Heat transfer products solutions for the industrial refrigeration sector
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Heat transfer products solutions for the commercial HVAC cooling sector
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for agriculture
- Water Quality Management Instruments for Textiles Industry
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Water Quality Management Instruments for Reverse Osmosis
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Air pollution, emission and process monitoring systems for minerals
- Water Quality Management Instruments for Environmental Industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Flow Solutions for Climate Change and Clean Energy
- Water Quality Management Instruments for Oxidation Reduction Potential / Redox
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Power Generation Solutions for Data Centers
- Air pollution, emission and process monitoring systems for food & pharma
- Seismic borehole and surface solutions for Geophysical site characterization sector
- Optical emission spectrometers instruments solutions for metals industry
- Flow Solutions for Flow Solutions for Mining & Raw Materials
Undefined Equipment Supplied In Egypt
4,740 equipment items found
Manufactured by:Aquafine - a brand by Trojan Technologies based inValencia, CALIFORNIA (USA)
A compact design and economical UV water treatment system for low-flow industrial applications. A Robust, Versatile and Cost-effective UV System. Aquafine’s VL Series provides a compact design and economical ultraviolet (UV) water treatment for low-flow applications, such as laboratory and medical facility water, pharmaceutical make-up processes, final electronic component rinsing, and ...
Manufactured by:AGC Instruments Ltd. based inShannon, IRELAND
The Model 23-502, uses the Flame Ionisation Detector (FID), which measures Hydrocarbons present in a sample ...
Manufactured by:AGC Instruments Ltd. based inShannon, IRELAND
The AGC Microx MIC 7 is a low cost, high quality Oxygen Analyser for % or ppm levels. The compact and rugged design is ideal for integration into your process line with wall, din rail and panel mounting options. The long life Zirconia sensor is accompanied by a control unit which enables a fast response time of just 10 seconds with a resolution of 1ppm. The easy to use multifunctional keypad and ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The Chanscope II is a rugged, portable instrument for measurements of the moisture (water) or hydrocarbon dew point temperature of any gas, and is frequently used to verify electronic hydrocarbon and water dew point analyzers. A user-friendly dew point tester that is easy to maintain and operate, it displays the temperature above the illuminated mirror, making it simpler for the operator to ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Designed for modern ultra-high-purity (UHP) gas applications, the ta7000 series measures impurities at extremely low, parts-per-trillion (ppt) levels, using either a reduction gas detector or flame ionization detector. Employing an advanced algorithm that isolates measurement signals while filtering out random electronic noise, the analyzer delivers unparalleled sensitivity. This results in an ...
Manufactured by:AMETEK MOCON based inBrooklyn Park, MINNESOTA (USA)
The Baseline® 9000 H Heated Hydrocarbon Analyzer is a microprocessor based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The heated total hydrocarbon analyzer is configured for single point analysis (with or without a sample pump) of samples heated up to 376 °F (191 °C) for pre-filtered (10 microns) non-condensing ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an industry-standard ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, particularly in applications where the sample is extracted to a remote ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The 5920 is an easy-to-use process moisture analyzer offering a wide range of performance features for low parts-per-billion level gas analysis in critical moisture measurement applications. It provides an extensive range of performance features including multi-gas compatibility, exceptional accuracy, online verification system, fast speed of response, and wide measurement ...
Manufactured by:FLIR Commercial Systems Inc - Extech Instruments based inNashua, NEW HAMPSHIRE (USA)
The 42511 is a Dual Laser IR Thermometer. Meter indicates ideal measuring distance. Featuring a 12:1 distance to target ratio where two laser points converge to a 1 in. target spot. Displays continuous and held data on a white backlit dual LCD display. Temperature range from -58 to 1100°F (-50 to 600°C). Complete with pouch case and 9-Volt battery. CE ...
Manufactured by:FLIR Commercial Systems Inc - Extech Instruments based inNashua, NEW HAMPSHIRE (USA)
The VIR50 is a 3992°F (2200C) Digital Laser Video IR Thermometer which features a 2.2" color TFT LCD display and built-in VGA (640 x 480) Camera. Includes a MicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PC. Dual lasers indicate the ideal measuring distance (approximately 50 inches) where the two laser points converge to a 1" target spot. Comes with microSD card, ...
Manufactured by:FLIR Commercial Systems Inc - Extech Instruments based inNashua, NEW HAMPSHIRE (USA)
The 42515 is a Wide Range IR Thermometer with Type K input which measures both non-contact and contact temperature. Wide InfraRed temperature range from -58° to 1472°F (-50 to 800 °C). Stores up to 20 readings. 13:1 distance to target ratio, laser pointer for easy targeting. Type K input for surface temperature measurements from -58 to 2498°F (-50 to 1370°C). Complete with 9 ...
Manufactured by:Cleaver Scientific Ltd - brand by THISTLE SCIENTIFIC LTD based inWarwickshire, UNITED KINGDOM
The CROSSLINKER (CL-508) is a complete, microprocessor controlled UV irradiation system, mainly dedicated to the linking of nucleic acid to membranes and elimination of PCR contamination. Its innovative design ensures unique ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The 9900 is a single or multi-component gas analyzer that measures process gas composition and can be used alone or as an integrated part of a continuous emissions monitoring (CEM) system. Configurable to measure most gas species that are absorbed in UV, it delivers excellent baseline stability and minimal span drift, with no interference from water and carbon dioxide. Other components that can ...
Manufactured by:AMETEK MOCON based inBrooklyn Park, MINNESOTA (USA)
As one of the most widely used gas detection techniques, the Photoionization Detector (PID), is commonly applied in both portable and fixed instruments for detection of a wide variety of organic compounds and some inorganic gases in ambient air. MOCON’s patented, award-winning piD-TECH eVx plug-in sensor provides complete photoionization detection capabilities and is designed to be ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only the measuring data from a HORIBA PG-250 and no ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer ...