- Home
- Equipment
- libya
- applications
- undefined
Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Underwater cleaning solutions for industry sector
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Chromatography laboratory instrumentation for feed industry
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
Undefined Equipment Supplied In Libya
879 equipment items found
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel gas passes through an inspirator at the base of ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Midland-ACS OPD (Over Pressurisation Device) is a 316L Stainless Steel unit providing protection to downstream equipment from over pressure ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Pressure Assisted Flares: Mach 1 sonic / Start fire / SN / Variable slot VMSA. Our cutting-edge MACH-1 sonic flaring technology, suitable for both off-shore and onshore installations, utilizes high pressure flare gas to establish an exit velocity equal to the speed of sound to combust waste gas ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
In crude and condensate truck-loading facilities, the introduction of oxygen into the vapor space can create a dangerous explosive environment. If VRUs are used to recover tank vapors, the oxygen contamination of the vapor can cause O2 levels to exceed allowable limits for pipeline feeds (typically 10 PPM), preventing producers from putting their gas into the pipelines. High O2 levels can shut-in ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The BR series gear operators are manufactured from high quality cast aluminium bronze and stainless steel materialsand designed for extended life operation of valves in corrosive man hole and vault steam distribution environments where road salts, standing water and elevated temperatures are ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Single- and double-acting pneumatic piston actuators (rack and ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The Smart Position Indicator is designed for use in chemical, petro-chemical, oil and gas industries, power plants and water ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The Rotork manPOWER range high-integrity fail-safe valve operation without the need for any power supply. The self-contained system is suitable for workshop or mounting on a wide range of rotary and linear operated valves and It offers a cost-effective solution for actuator applications where operation is infrequent. Typical applications include emergency shutdown valves and over-or ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Small, electro-mechanical part-turn actuator environmentally sealed to ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
ROM actuators provide quiet and reliable operation for all kinds of small ball valves and butterfly valves, as well as dampers and ventilation louvres. They provide local indication and manual override options together with a wide range of ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Torques from 370 to 26,000 ft.lb.(271 to 35,256 Nm). 90 to 313 degrees rotation. Continuous unrestricted modulating duty. Manual override standard. HART, Profibus & Foundation Fieldbus available. Automatic torque limiting. Self-locking drive system to hold in last position and prevent backdriving up to 125% of torque rating. AC input power (single and three phase). Temperature range from ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Thrusts from 150 to 1,500 lbf. (667 to 6,672 N). Stroke distance from 6 to 24 inches (152 to 610 mm). Modulating Duty: 2,000 starts per hour. Manual override standard. HART® available. Automatic thrust limiting. Anti-condensation heater and thermostat. Self-locking drive system to hold in last position and prevent backdriving up to thrust rating. AC input power (1-phase and 3-phase) or DC ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Thrusts from 800 to 1,600 lbf. (3,558 to 7,117 N). Stroke distance from 6 to 24 inches (152 to 610 mm). Modulating Duty: 2,000 starts per hour (indoor/outdoor). Manual override standard. HART® available. Automatic thrust limiting. Anti-condensation heater and thermostat. Self-locking drive system to hold in last position and prevent backdriving up to thrust rating. AC input power (1-phase and ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
400 Series electric actuators use the reliable Planetary Torque Control System (PTCS), providing a highly efficient ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
IQ 3-phase electric actuators for isolating, regulating or inching duties (S2 & S3 / Class A & B) of up to 60 starts / hour. Direct torque output range from 10 to 3,000 Nm (7 to 2,200 lbf.ft). With second stage gearboxes, multi-turn output torque up to 44,000 Nm (32,452 lbf.ft) and part-turn up to 826,888 Nm (609,881 ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Control component packages are a part of any actuator / valve installation. Rotork has extensive experience in the design and assembly of all types of fluid power control systems to satisfy any customer requirement for on / off, modulating or ESD (emergency shutdown) service. Packages can be mounted on a panel or in a cabinet and mounted either on the actuator or at a remote location. Rotork ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
We are well versed with supplying subsea product to meet the harsh conditions and stringent demands of subsea applications. The subsea product range encompasses actuator and gearbox designs for retrievable and non-retrievable applications. Our engineering group works closely with contractor and end-user engineers to meet specific project ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The portfolio of medium pressure products allows for the safe and reliable implementation of 1,379 bar (20,000 psi) pressure systems incorporating needle valves, ball valves, single block and bleed manifolds, Double Block and Bleed (DBB) manifolds, check valves, fittings and adaptors. The medium pressure valves are available in ¼", 3/8", 9/16", ¾" and 1" tubing sizes comprising of a coned and ...