- Home
- Equipment
- libya
- applications
- undefined
Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Underwater cleaning solutions for industry sector
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Chromatography laboratory instrumentation for feed industry
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
Undefined Equipment Supplied In Libya
879 equipment items found
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Lever arms for damper operation. Used on dampers to transfer the 90 degree operation from the worm gearbox to the damper spindle. This is an optional feature on all IW and MTW ranges of worm ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Direct Mount Chain Wheels mount directly onto the gearbox input shaft by means of a pin or coupling and are suitable for use with every gearbox range in our product ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
125 mm to 2000 mm (5" to 80") diameter. Stainless steel or powder coated. Keyed, pinned or square drive. Fabricated or pressed design. Oval or round designs for small valves. Optional open and closed indication marking, locking flange, handle, specials, galvanised finish, rotating handle, flat or ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high turndown ratio in a simple, yet effective, product. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The new Model Duraspark 1000 Heavy Duty Pilot was developed specifically for the rigors of the oil-patch, providing additional layers of protection and heat shielding of critical components. The transformer box has also been placed at grade (vs. near the flare tip) reducing heat stress of these critical components. Available with retractable packages, the DuraSpark 1000 will improve system ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Torque range up to 850,000 Nm (626,890 lbf.ft). 21 sizes. Ratios from 40:1 to ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Torque range up to 850,000 Nm (626,890 lbf.ft). 21 sizes. Ratios from 40:1 to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for low pressure tank ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Interlocking systems for safe operation. Used to prevent potentially hazardous situations caused by errors in the operating sequence of industrial processes. The operator is forced to follow a predetermined sequence by means of a mechanical coded key ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The Midland-ACS IMPACT is a high integrity modular pneumatic actuator control assembly in 316L stainless steel, used for the control and sequencing of process valve actuators on oil and gas ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The Dual Speed Input Reducer is used to reduce the number of input turns required, and therefore the operating time, on manual gearbox applications. It can be used with any manual gearbox which can be fitted with an F14 or FA14 input ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Midland-ACS 3550 Series 1/4' to 3/4' Filters are 316L Stainless Steel units for filtration of compressed air and gases for the actuation ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON offers our own WILDCAT natural gas compression systems for wellhead applications as rental or lease equipment. Through testing, we can identify flow improvement up front and determine the appropriate standard system for your gas compression and budgetary needs. AEREON's gas compression systems have been used successfully for many years. Systems installed on coal bed methane wells, gas ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 850 Pilot is a time-proven product that combines electric spark ignition with continuous spark monitoring, thermocouple monitoring, and retractability. The combination of these highly-demanded features has made the high-alloy, stainless steel Model 850 Pilot one of the most well-received ignition systems on the market. This electric pilot provides a rapid, direct spark every 10 to 20 ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The modulating version of the IQT electric actuator is designed for modulating duty up to (S4/Class C). It features fast-response remote control circuits for rapid ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
The Rotork Series AB-SS quarter-turn gear operators are rugged, industrial grade products manufactured with stainless steel housing ...
Manufactured by:Rotork plc based inBath, UNITED KINGDOM
Complete range of sandwich manual override quarter-turn gearboxes for spring-return pneumatic ...