Booster Pump Controller Articles & Analysis
5 articles found
System Components In Hawaii, the primary components of a reclaimed water subsurface drip irrigation System are supply lines, filtration station and automation controls, booster pumps, flow meters and monitoring sensors, chlorination system, main lines, submains, and polyethylene lateral drip tubing with emitters. ...
After the water is treated, it is pumped to a water tank. With a 340 meter pump head, a surge calculation determined the need for a control valve after the pump with a surge anticipating relief valve mounted in a tee, downstream of the pump check valve. ...
Their Challenge To modernize the booster pumps and automatic valve controls for three of their eight water storage tanks and provide immediate improvement in water pressure to their customers in South Modesto. Our Solution Singer Valve’s 2SC-MV valve with MV1-TP Electronic Flow Control and Metering. The MV1-TP provides ...
The aeration system includes two air injection skids (duty/standby), each consisting of a booster pump, injector, and pressure gauges, a control panel, and a 6” x 24” Pipeline Flash Reactor (PFR). A sidestream is taken off the effluent pipeline, directed through a booster pump, then through a ...
The two wells were designed to operate at the same time with existing controls in place, and the wells produce approximately 15,000 gallons per day (gpd) in 12 – 13 hours of well pumps operation. ...