Refine by
Ch4 Analysis Articles & Analysis
13 articles found
Built on Cubic's mature gas sensing technology platforms including NDIR and UV-DOAS, Gasboard-9805 Portable Emissions Measurement System (PEMS) delivers exceptional accurate gas emissions measurement (CO, CO2, THC&CH4, NO, NO2), particulate matter analysis, and exhaust flow rate monitoring in a single unit. ...
Built on Cubic's mature gas sensing technology platforms including NDIR and UV-DOAS, Gasboard-9805 Portable Emissions Measurement System (PEMS) delivers exceptional accurate gas emissions measurement (CO, CO2, THC&CH4, NO, NO2), particulate matter analysis, and exhaust flow rate monitoring in a single unit. ...
Cubic Instruments' Gasboard-3200PLUS Handheld Biogas Analyzer provides on-site analysis of CH4, CO2, O2, and H2S based on NDIR and electrochemical (ECD) sensing technologies. ...
Cubic Instruments' Gasboard-3200PLUS Handheld Biogas Analyzer provides on-site analysis of CH4, CO2, O2, and H2S based on NDIR and electrochemical (ECD) sensing technologies. ...
• Gasboard-3500UV Online Biogas Monitoring System: Continuous Multi-Gas Analysis for Process Control and Gas Quality Assurance Gasboard-3500UV, developed for continuous biogas process and desulfurization monitoring, utilizes UV-DOAS, NDIR, and electrochemical (ECD) gas sensing technology platforms to simultaneously measure CH4, CO2, O2, and H2S, providing ...
Gasboard-9801: Comprehensive Laboratory Testing System Laboratory exhaust testing demands superior measurement accuracy and comprehensive component analysis across a wider range of parameters compared to PTI applications. ...
One significant factor in interpreting CH4 breath test results in children is the role of oro-caecal transit time, which does not appear to impact CH4 analysis. ...
The average value achieved for chemical oxygen demand (COD) removal was 87% and for methane yield was 0.12 L CH4/gCODremoved. Based on mass balance analysis, it was found that about 30% of total influent COD was used for methane conversion, 15% of COD for sulfate reduction, 10% for biomass growth and 10–20% of COD remained in the effluent. ...
Municipal Solid Waste (MSW) in Patna is disposed of in an unscientific manner without considering environmental impacts. The wastes are dumped in the low-lying areas without compliance of the MSWM Rules, 2000. The dumped wastes are mixed with biomedical wastes making it hazardous. Ambient air quality and ground water were analysed at two dump sites to study the possible impacts of MSW. The ...
Technical Requirements Disposal of 300 Nm3/h landfill gas Container construction High-temperature flare Explosion protection and safety concept Compliance with local regulations Gas analysis CH4, O2, CO2 Remote monitoring and alarm HOFSTETTER’s Solution Using the compact degassing equipment HOFGAS® - Ready the landfill is degassed and the landfill gas ...
HOFSTETTER’s Task The landfill gas has to be collected, treated and removed under following conditions: Treatment of the gas to supply the generators High temperature combustion of the excess landfill gas Weather protection of the pump station and automatic control Gas analysis CH4 / O2 Visualisation of the flare’s operating value Adhereing to the local ...
HOFSTETTER’s Task The following conditions had to be met in order to increase the gas extraction capacity for utilisation in the gensets: Treatment of the gas for supply to the generators Connection of 2 power generators with 312 kW each Flaring off the excess gas by high temperature combustion Complete low emission combustion Continually maximise the gas supply to the engines, respective ...
HOFSTETTER’s Task The landfill gas was to be combusted in a high temperature flare with the following conditions: Complete low emission combustion Meeting the TA-Luft legislation Regulation range 1:5 Continuous operation at a flow rate of 50-250 Nm3/h CH4, O2 and CO2 gas analysis system with 11 measuring points HOFSTETTER’s Solution The high temperature ...