Chloride Sensor Articles & Analysis
5 articles found
About- Water Ion Sensor Ion sensor is a sensor that uses ion selective electrode to convert the amount of ions felt into usable output signal. ...
Capability to measure below 1ppm ammonium (total ammonia or NH3-N) in presence of common levels of potassium for secondary WWTP Capability to measure nitrate (NO3-N) even in the presence of high levels of chloride or nitrite ions without loss of linearity or stability Ammonia and nitrate measurements can be performed using just one analyzer Support for dual ammonia/ammonia, ...
Improved HF treatment system efficiency through more accurate pH measurement and control Reduced Sensor Usage through less usage Increased inline service time for sensors during specialized reference The Problem An aluminum can etching company and a silicone wafer etching wanted to effectively treat their waste using a traditional CaF2 removal system. To ...
The results of tests with a sodium chloride tracer in a shallow maturation pond in Brazil are presented. The pond – a full-scale effluent treatment unit for around 250 p.e – was 0.80 m deep with a length/width ratio of 4.3:1, and had accumulated sludge for 12 years to about 40% of the total volume. ...
Sfeawater has an average chloride concentration of 19.000 mg Li Hem 1992). A strong linear relationship was established, thus demonstrating the validity of using SCas a surrogate for chloride estimation. This study also compared inherent measurement drift of a chloride l££and a conductivity sensor under controlled ...