Clay Polymer Articles & Analysis
9 articles found
Geomembrane is a modern waterproof geotechnical material and a polymer membrane. The raw material for producing geomembrane is high and linear low density polyethene, adding carbon black, antioxidant and high-temperature stabilizer. ...
Geosynthetic Clay Liner Definition What is Geosynthetic Clay Liner(GCL)? Geosynthetic Clay Liner is an anti-leakage geosynthetic material. ...
Dust abatement methods fall into 7 general categories: Water Petroleum-based products Lignosuflates Electrochemicals Clay Additives Chlorides Synthetic polymers Although each road dust control product has its own application process and procedure, generally, all products must adhere to the same weather conditions for treating roads. ...
The physicochemical treatment was employed to treat acid mine drainage (AMD) in the removal of turbid materials using clay only (exp A) and a combination of clay, FeCl3 and Mg(OH)2 (exp B) to form a polymer. ...
Filtration or Treatment: Some tools that Aquatech employs for filtration and/or treatment are;; Enviro-tanks, filter bags and geo-tubes, sand media filters, pressure vessels (carbon, clay, alumina) and polymers that remove sediments and pollutants from the water (ex: hydrocarbons, metals…) to meet permit requirements. ...
CrudeSorb is a proprietary adsorption media based on resin, polymer, and clay technology. It has been proven to be extremely efficient at removing oil, grease, and soluble organics from water. ...
In this paper, we report the influence of chain length of organic modifier on the crystallinity and nanomechanical properties of polymer clay nanocomposites (PCNs) using modifiers of three different chain lengths while maintaining the same functional groups. We also report the influence of change in functional group on the properties, while maintaining the same ...
Depending on the preparation conditions (low or high shear stress), about half of the available polymer/clay interfacial area is formed and the degree of homogeneity characterising the distribution of this interfacial area is about 40% at high shear stress. On the contrary at low shear stress, montmorillonite (MMT) platelets are evenly dispersed in PLA associated ...
Understanding the interfacial interactions and structure is important to better design and manufacturing of nanoparticle-filled polymer nanocomposites. This paper presents our recent molecular dynamic studies on organically modified clays and polymer nanocomposites, including the swelling of clay minerals, molecular structure and ...