Refine by
Contaminants Absorption Articles & Analysis
31 articles found
In die casting plants, the molds are sprayed with a high-temperature release agent to ensure that the cast parts can be removed from the mold without any problems. To avoid odors and health hazards, the resulting vapors are extracted. The contaminated air is fed into a wet scrubber. In the wet scrubber, impurities such as dust particles, release agent vapors and oil droplets are washed out of the ...
Thermal desorption is a powerful technique used in various fields, including environmental science, analytical chemistry, and material science. It involves the process of heating a material to release volatile compounds or contaminants absorbed within it. This technique is widely employed for the analysis, remediation, and purification of solids, liquids, and gases. In this comprehensive guide, ...
The traditional pump-and-treat solution has been applied to the remediation of PFAS-impacted groundwater, but it is expensive and can take decades to achieve any signifi cant levels of removal. Additionally, contamination in the more mobile, high-permeability groundwater zone can migrate into immobile, low-permeability subsurface zones, and pump-and-treat is not effec tive in ...
With a counter-current flow design, the contaminated gas enters the scrubber tower from the bottom and moves upward, while the scrubbing liquid is introduced from the top and flows downward. ...
Synopsis: The Dosing of Bio Organic Catalyst has been started in the Lake The automatic Dosing has been ongoing for over four months starting from January 2022 and there is improvement in the water clarity. The aquatic life in the lake is being maintained and no chemicals are added to the water to keep it aesthetically clean. The water at the lake is pumped from various lifting stations across ...
Humidity is a natural phenomenon and is the amount of water vapour present in the atmosphere or in a gas. Water vapour itself is the gaseous state of water and is invisible to the human eye but we have all experienced how uncomfortable high amount of water vapour present in the atmosphere can make you feel. It comes from water evaporating from lakes and oceans and since warmer water ...
In July 2019, a failure of pump equipment led to the spill of about 320,000 litres of a mixture of crude oil and produced water at an oil storage and process- ing facility located in remote northern Alberta. As the facility operator reported, approximately 99% of the spilled fluids were recovered, having been contained in an on-site bermed area, which already held about 300 m3 of pooled surface ...
The main absorption resonance is centered at 3400 cm-1. As in Figure 1, as more dissolved water is present in the oil, the absorption resonance continues to increase. ...
Biological Activated Carbon Filtration This method of water filtration is mainly used for the removal of specific organic contaminants as well as natural organic matter. It’s based upon the absorption and assimilation of containment. ...
Subsurface transport of a sorbing contaminant is poorly understood and characterized. Here, a new semi-analytical saturated–unsaturated flow and transport model is coupled to a kinetic sorption algorithm to assess the impact of changes in the subsurface permeability architecture and flow rate on sorption characteristics. The model outputs reveal the pronounced effect of the rate of vertical ...
Geomaterials (soils and rocks) exhibit peculiar physical, chemical, mineralogical and biological properties, which influence their interaction with the contaminant(s) to a great extent. This interaction can be quantified by employing a parameter 'Distribution coefficient', kd, which plays an important role for determining sorption and desorption characteristics of the contaminant when it ...
Silver doped multi-walled carbon nanotube/β-cyclodextrin (1% Ag-MWCNTs/β-CD) nanocomposite was prepared by reductive pre-treatment of Ag+ on MWCNTs, followed by binding with β-CD. Crystalline structure, morphology and crystallite size estimation were carried out by X-ray diffraction (XRD), Fourier transform infrared spectroscopy, field emission scanning ...
Because of large usage as flame retardants and additives, organophosphate esters (OPEs) are widely detected in the environment and regarded as emerging contaminants. However, the sorption of OPEs to organic matter and its effects have scarcely been studied. In the present study, the sorption of nine commonly used OPEs to four representative humic acids (HAs) including Elliott Soil HA, Suwannee ...
The experimental data on heavy metal content in sediment samples collected from Thane Creek points out to the need of regular monitoring of water resources and further improvement in the industrial waste treatment methods.Keywords: sediment pollution, heavy metals, metallic contaminants, flame atomic absorption spectrophotometry, bioaccumulation, food chain, ...
Nano zero–valent iron (nZVI) is one of the most prominent examples of a rapidly emerging technology for the treatment of contaminated soil and groundwater. These particles were used successfully to absorb various heavy metals (e.g., Pb2+, Ba2+, As5+, As3+, Cr6+, Co2+, Cd2+, Cu2+), chlorinated organic contaminants (e.g., solvents, pesticides), nitrate and so ...
The metal concentrations associated with the RDS were determined by strong nitric acid digestion and atomic absorption spectrometry. The outcomes of the investigation show highly site–specific variability of the RDS build–up primarily linked to road lay–out, and that road surface conditions and surrounding land use influenced the results. ...
Since pure water conductivity measurement is detecting trace amounts of ionic contaminants in the already temperature dependent self-ionizing water, the installation and calibration setup must make special provisions to eliminate or reduce any trace contaminants. Further, the trace contaminants themselves exhibit variable temperature coefficients ...
Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are obsolete ...
INTRODUCTION Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon and ...
The occurrence and the partitioning of polycyclic aromatic hydrocarbons (PAHs) and seven metals (Al, Cd, Cr, Cu, Ni, Pb and Zn) were investigated in activated sludge wastewater treatment plants by means of passive and active sampling. Concentrations total dissolved and particulate contaminants were determined in wastewater at several points across the treatment system by means of grab sampling. ...