Detergent Testing Articles & Analysis
6 articles found
Wastewater from washing, oil separators, the metal processing and detergent industries, was tested and treated for treatment of different types of liquid waste at industrial level at Domžale-Kamnik Wastewater Treatment Plant (WWTP). ...
Every new product that Henkel develops requires extensive testing, whether for powder or liquid detergent. To perform these tests and ensure product quality, the company has now replaced its old data recorders with Delphin measurement data acquisition systems. ...
INTRODUCTION Ivanhoe Industries performed tests to determine which of their antifoams would work best in 2% Micro-90®. XFO-970 was recommended for use at 0.25-0.40% in 2% Micro-90®. In-house confirmation tests were conducted by adding the 0.25% antifoam in a 2% Micro-90® solution. Foam levels, detergency, pH, and residue ...
Project launch The search for a replacement of the aging wastewater treatment system brought with it the possibility of several options. Thus, studies and tests on various technologies or combinations of technologies were launched. ...
ByH2O GmbH
For the two detergents, the solubilising activity was tested both below and above their critical micelle concentration (CMC) on the DOPC/DPPC bilayers. ...
In the first year, the efficiency of various decontamination protocols was tested using small test pieces of materials that are commonly used in groundwater sampling devices. Those tests showed that a hot detergent wash and rinse followed by hot air drying (105°C) was the most effective decontamination protocol. ...