Fluid Bed Processor Articles & Analysis
3 articles found
The Challenge Originally published in Tablets & Capsules Magazine Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both ...
About 8 minutes after spiking, the VOC concentration decreased to approximately 25 percent of LEL, which is the acceptance limit of most standard equipment that treat VOCs using catalytic or thermal oxidation. Fluid-bed processors can generate the same peaks, as Figure 2 shows. ...
Through the qualification, GK demonstrated that a properly designed vibratory fluid bed dryer would achieve the results they required, and improve the quality of their end product. Solution Within six months GK’s Engineered Products Group designed, built, and delivered a turn-key system incorporating a 600 square foot fluid ...