Fuel Metering Articles & Analysis
27 articles found
Stationary pumps are generally more economical for large-volume pumping because they consume less fuel per cubic meter compared to constantly moving pump trucks. At the same time, relying solely on a stationary pump might increase labor costs for reaching difficult areas. ...
The new ALV10 liquid fuel metering valve from Continental Controls Corp. is designed for use on gas turbines with outputs of 250 kW to 35 MW. The valve design is capable of metering kerosene, Jet A, Diesel Fuel #2 and other similar liquid fuels (including various bio-fuels) with a closed-loop ...
Depending on the compounds, the technology used to charge/discharge energy may vary in terms of cost and performance. Fuel Cells: it’s a continuous chemical storage system. The most common application uses hydrogen as fuel. ...
Here are some steps to identifying the flow energy applications in your facility, asking the right questions, and then specifying the correct flow meter for the fluid and application to get the most accurate flow measurement possible. ...
Combustion Air Handling Units (CAHU) feed race track simulated temperature, pressure, humidity air to engine, while fuel flow is metered and all engine fluids are conditioned to precise levels. ...
The dyno machine build-out also included two AC dynamometers, FuelTrak fuel flow meters and Engine Environmental Controls. In addition, a combustion analysis software suite was installed to help keep them at the forefront of the automotive dyno industry. ...
Sierra Equipment Used: Engine Conditioning Particulate Emissions Sampling Fuel Flow Metering / Conditioning CADET Control, Automation and Datalogging Dynamometers Test Support Equipment Request Technical ...
In large boilers (Figure 1), power plants bring together air and fuel (natural gas, waste gas, oil or coal) for combustion, which creates heat. ...
Project Overview: Sierra CP was engaged as the principle contractor to design and implement a significant refurbishment of BP-Castrol Global Headquarters for fuel & lubricant R&D. The refurbishment required the construction of an exo-structure encompassing the existing test facility to accommodate the additional test facility plant and services required for the major ...
Key Performance Features: Four new ECU mapping and driveline test cells to accommodate 1000kW engines with electric dynos up to 570kW Self-sufficient in electrical power requirements during testing (on occasions is a net exporter of power to the national grid) All cells are equipped with transient fuel conditioning & measurement All cells are equipped with CAHU’s ...
Coriolis meters are being used in the shipping industry to give true volume of fuel being delivered and to avoid bunker disputes due to aeration of fuel, known as the ‘Cappuccino’ effect MORE INFORMATION Fuel suppliers sometimes introduce air intentionally into marine fuel during the pumping of ...
Our In-Cell Equipment Advantage: We are truly unique in that we own the vast majority of our technology IP ranging from test automation software and hardware to engine conditioning, fuel metering, emissions and analytical equipment. In many cases, our customers are pushing the edge of innovation with their engine or vehicle R&D. ...
Sierra Equipment Used: Engine Conditioning Particulate Emissions Sampling Fuel Flow Metering / Conditioning CADET Control, Automation and Datalogging Dynamometers Test Support Equipment ...
Combustion Air Handling Units (CAHU) feed race track simulated temperature, pressure, humidity air to engine, while fuel flow is metered and all engine fluids are conditioned to precise levels. Our Equipment Solutions Used in this Facility: Dynamometers Fuel Measurement and Conditioning CADET V14 Test Automation Systems Fluid Temperature ...
Passing through the delivery meter gives the blend an additional mechanical mix. Additional mixing for all of these systems occurs as the fuels enter the receiving tank. ...
In addition, the total heating value of the mixed fuel gas is also an important parameter in energy calculation for pricing. According to various concentrations of fuel gases’ components, the total heating value Q is computed by the following equation, and the total energy value can be easily obtained with an additional volume flow meter. ...
Chromatotec has been pleased to participate to the last issue of Petro Industry News with an article on “How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous Fuels in Metering Stations”. Find out this complete article in October/November issue of Petro Industry news (Volume 17 Issue 5), or read it ...
Natural gas is colourless and odourless in its most pure form. When extracted, it can contain sulfur compounds such as H2S and Mercaptans that when in the presence of moisture can produce sulfuric acid that can degrade the pipeline. So for reasons of public safety as well as pipeline integrity, there is a need to measure and control precisely the level of odorant species in natural gas : ...
Natural gas is colourless and odourless in its most pure form. When extracted, it can contain sulfur compounds such as H2S and Mercaptans that when in the presence of moisture can produce sulfuric acid that can degrade the pipeline. So for reasons of public safety as well as pipeline integrity, there is a need to measure and control precisely the level of odorant species in natural gas : ...
Detailed hydrocarbon analysis (DHA) is a separation technique used by a variety of laboratories involved in the petrochemical industry for analysis and identification of individual components as well as for bulk hydrocarbon characterisation of a particular sample. Bulk analysis looks at gasoline composition in terms of PONA components (Paraffins, Olefins, Naphthalenes and Aromatics) and other ...