Refine by
Icp Articles & Analysis
225 articles found
Quality Assurance and Testing Spectrometric Analysis Lead quality control relies on ppm-level impurity analysis via optical emission spectrometry (OES), X-ray fluorescence (XRF), and inductively coupled plasma (ICP): OES: 2-3 minutes per sample; detection 1-10 ppm; routine QC and final certification. XRF: 1-2 minutes; detection 5-20 ppm; rapid screening and alloy verification. ...
XRF informs lithium potential via brine chemistry and pathfinder elements, guiding subsequent ICP-MS laboratory analysis where appropriate. Conclusion: Speed Determines Success Mineral exploration in Latin America is a race where rapid, data-driven decisions determine access to finance, property acquisition, and production timing as metal prices fluctuate. ...
Methods comparison (speed, chemistry ID, cost, drawbacks): Visual inspection: 10 sec, unreliable, $0, cannot distinguish chemistries Weight/dimensions: 30 sec, unreliable, $0, chemistry overlap Open-circuit voltage: 2 min, moderate, $50, degrades with battery age ICP-MS lab analysis: 2-5 days, excellent, $150/sample, throughput too slow XRF ...
Rare earth elements (REEs) are often a target of rapid analysis in geology, mining, and processing: the goal is to quickly determine whether enrichment is present, how composition changes across zones, and which streams or lots look promising. XRF (X-ray fluorescence) is well suited for these tasks, but when working with REEs it is important to understand the method’s limitations. In ...
In modern electronics manufacturing, precise control of solder alloy composition is critical for assembly quality and reliability. Electronic manufacturing services (EMS) and surface-mount technology (SMT) lines consume kilograms of tin-based solders every day—both lead-free alloys (e.g., Sn-Ag-Cu or Sn-Bi) and classic tin-lead (Sn-Pb) for specialized tasks. Even small deviations in ...
, acid evaporates slowly, and residual acid may corrode the instrument or cause matrix interference (e.g., Cl? suppresses ICP-MS signal). Optimized solution : Increase the temperature in stages (e.g., ...
The GB/T 30835 standard specifies the use of microwave digestion combined with inductively coupled plasma optical emission spectrometry (ICP-OES) for lithium measurement. Microwave digestion offers rapid sample decomposition in sealed vessels with benefits including low blank values, high parallelism, and convenient ...
In this study, we follow the pharmacopoeia guidelines and apply microwave digestion for sample preparation, combined with ICP-MS (inductively coupled plasma mass spectrometry) for the determination of heavy and toxic elements in American ginseng. ...
This method ensures fast, low-loss, low-contamination digestion, and, when coupled with ICP-MS, provides accurate and efficient detection of heavy metal residues in edible ...
In the cement industry, x-ray fluorescence analysis (XRF) is one of the major techniques employed for raw material and final product quality control. Typically, "pressed pellet" sample preparation is used; however, the disadvantage to this is that this technique shows only relative data to known and accepted reference methods like fusion or wet chemistry and takes no account of the different ...
The analysis of iron ores using fused bead preparation is well described in ISO 9516-1. This report will demonstrate the performance of our VITRIOX electric for the sample preparation of iron ores according the international standard ...
The analysis of raw materials with XRF is a common standard method [1,2]. The samples are prepared as borate beads to ensure high precision and, thus, accuracy. Here it is important that the sample is fused with the borate to 100% and that a homogenous fusion bead is produced. FLUXANA's electrical fusion machine guaranties both of these requirements. The element silicon is an important indicator ...
The analysis of materials containing chlorine with XRF is a continuous challenge, because chlorine displays high volatility during borate fusion. This leads to poor repeatability with conventional fusion ...
Our lab uses CRMs certified with high levels of heavy metals (lead, cadmium, arsenic):Instrument Calibration: CRMs make sure the ICP-MS (Inductively Coupled Plasma Mass Spectrometer) reads properly and can be traced. ...
This not only improves the requirement for complex compensation matrices, but also allows for the simultaneous analysis of more cell characteristics than fluorescence flow cytometry.The core of Mass Cytometry technology is the fusion of flow cytometry with Inductively Coupled Plasma Time-of-Flight Mass Spectrometry (ICP-TOF-MS). The principle is to first label antibodies with ...
After HPLC separation, the mass spectrometry peak intensity of phosphorus element is detected in ICP-MS. At the same time, the amino acid sequence of peptide is qualitatively identified by ESI-MS under the same chromatographic conditions. ...
For instance, the concentration of gold in the purified gold nanoparticle solution is directly measured via ICP-MS. This measurement permits calculation of the nanoparticle number concentration by dividing the solution’s total mass by that of an individual nanoparticle — the formula being N=MC/m. ...
• Barite-barium must be analyzed by fusion-XRF or fusion-ICP. • Monoethanolamine and diethanolamine must be analyzed by ion reflux extraction. 9. ...
Plasma emission spectrometry Principle: the atoms atomized and excited to the high energy state of phosphorus in the ICP light source produce electromagnetic radiation with characteristic wavelength when they transition to the ground state, and the emission intensity is proportional to the concentration of phosphorus atoms. ...
Elemental composition The presence of impurities in aluminum adjuvants can be determined using inductively coupled plasma mass spectrometry (ICP-MS). Differences in the type and amount of metal ions have been reported between AH adjuvants obtained from different manufacturers and from different batches, possibly due to differences in the sources of aluminum salts, chemicals, and ...