Inline Mixer Articles & Analysis
16 articles found
A chemical feed pump doses the Genclean chemical into the water source typically by using an inline static mixer or other suitable mixing device to maintain the suitable ORP values on a continuous basis for organic, microbial oxidation & disinfection or both. ...
Customer / Type of customer Reischtett geothermal drilling site - FRANCE (67) Issue / Need FONROCHE Géothermie drills deep geothermal boreholes that produce a large volume of drilling mud (free from cuttings). In order to improve its environmental footprint, Fonroche Géothermie decided to implement a solid waste disposal solution as opposed to the liquid mud currently ...
Treatment Plant Conventional activated sludge treatment, with primary and secondary clarification and chemical phosphorous removal. Population serviced: 600,000 Average daily flow: 100 MIGD(450 MLD) Sludge production: 30 t/day Application Equipment: High solids Sharples centrifuges Old Mixer: Direct in-line addition New mixer: 6” OPTIFLOC™ Flow: 100 – 130 IGPM ...
SOLUTION The tank and agitator used for mixing the flavours into water and the glass bead carbonator were both removed and replaced with a Statiflo Series 200 Sanitary Motionless Mixer. This Mixer was fitted with removable elements, RJT couplings and integral injectors for both carbon dioxide gas and flavour. ...
The U.S. Environmental Protection Agency has launched an effort to treat contaminated groundwater in Grand Island, Nebraska. The Parkview Well Superfund Site consists of two areas of groundwater contamination, the Northern and Southern Plumes, which include several volatile organic contaminants including tetrachloroethene (PCE), 1,1-dichloroethene (DCE), 1,1,1-trichloroethane (1,1,1-TCA) and ...
In some areas the cold period can last for up to eight months. Sub-zero temperatures are recorded even in October. This fact makes a small antifreeze production business quite promising. Why do we need non-freezing liquids? One important area of antifreeze liquid us is cleaning of car windscreens (windscreen cleaners). Another is cooling of the engine. In the cases described above, antifreeze ...
Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...
Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...
Once per week at each plant, 30.000 gallons of waste will be pumped from the digester into the Geotube container. As the waste flows through an inline mixer, 15 ppm of a .5% solution of a cationic polymer is injected into the waste stream to facilitate flocculation and precipitation of the solids. ...
The Solution Chemineer, in conjunction with The DEN Group, recommended an innovative process solution that eliminated contamination of the wetted surfaces associated with the dynamic mixer during processing. A Kenics KM Series Static Mixer was installed inline just prior to the packaging component of the processing system, allowing the pigment ...
Compressed from 7 in. of water column to 3 psi, the gas enters a second carbon scrubber to remove siloxanes, which can harm the engines. In the plant’s static inline mixer, this cleaned and compressed biogas is mixed with the diluted natural gas to maintain the optimal blend of 80% digester gas and 20% purchased natural gas. ...
Ultrasonic mixing uses cavitational shear forces that are more effective in the mixing of fine size materials than conventional rotary mixers and rotor‑stator mixers. For cement, silicas, fly ash, pigments or carbon nanotubes ultrasonic dispersing improves the performance of these materials, as it improves the particle distribution and contact with water. ...
Citrus World, Florida’s third largest fruit co-op, recently expanded its product line to include tomato juices. In doing so, the Lake Wales based processor ran across a difficult blending problem. Daniel Cronin, engineer on the project, says the co-op tried various vessels and mechanical mixing devices, in attempts to blend viscous tomato paste and water. None proved adequate, including ...
The increasing popularity of yogurt in recent years-requiring greater production capacity and efficiency-has brought about a need to “re-think” just how best to feed raw materials into mixing and blending systems, and into filling machines. Initially, in most European and U.S. plants, the mixing of milk, yogurt culture, and additives was essentially a hand-batching process. This ...
Compressed from 7 in. of water column to 3 psi, the gas enters a second carbon scrubber to remove siloxanes, which can harm the engines. In the plant’s static inline mixer, this cleaned and compressed biogas is mixed with the diluted natural gas to maintain the optimal gas blend of 80% digester gas and 20% purchased natural gas. ...
A major source of waste water in many power plants is the waste stream that results from ion exchange used for demineralizing the boiler feed water. The alkaline regeneration waste stream produced by the ion exchange process requires the addition of an acid to this stream before discharge from the plant. Regulatory authorities typically require the effluent to have a near neutral pH before ...