Refine by
Interface Detection Articles & Analysis
22 articles found
During cycling, electrolyte components oxidise at the cathode-electrolyte interface and form a thin, reactive interphase. This layer is commonly known as the solid electrolyte interphase (SEI), or more specifically as the cathode-electrolyte interphase (CEI) when formed on cathodes. Although the SEI is crucial for stabilising the cathode-electrolyte interface, it ...
As semiconductor devices shrink to meet the demands of advanced electronics, the precision of material removal during fabrication becomes increasingly important. Processes like ion beam etching must stop precisely at targeted etch depths to preserve layer integrity and device function. In multi-layered device architectures, even minor deviations in etch depth can compromise performance or yield. ...
Monitoring solid levels in liquid environments is important for many industrial and environmental applications. In an industrial vessel, accumulated sediment or sludge can cause equipment damage, create blockages or clogs, result in expensive maintenance, and impact the overall system’s efficiency. Traditional methods of monitoring solid level can be labour-intensive and may not provide ...
Microwaves generated by radar reflect off various liquid and solid material surfaces, enabling reliable level measurements for many industry applications such as: Water level monitoring in stormwater and sewer (gases) manholes Outdoor environmental flood monitoring in rivers, lakes and oceans Municipal and industrial wastewater tanks with surface foam and ice Oil-water interface ...
The distance or level is calculated based on the time difference between the pulse sent and the pulse received. For oil-water interface level detection, radar sensors are effective because of the different dielectric constant of oil (k 2.3) and water (k 80) that enables the sensor to determine the layers. ABM Radar Sensor Operating Principle ABM Sensor Technology ...
It typically employs probes or floats that detect when the liquid reaches a certain level or monitors the level continuously. ...
Abstract:When it comes to gas detection, there are various types of detectors on the market, each designed to detect a specific type or range of gases. ...
ByJXCT
For this project, ABM's non-contact interface detection radar sensor was selected to monitor the separation process accurately. Problem The site's previous interface detection sensors were labour-intensive. The interface was measured using a contact method based on a Time Domain Reflectometer (TDR). ...
Products range from barrier-free optical turnstiles that just detect when people pass through rather than physically stopping them to full-height turnstiles that provide unmatched security. ...
CT kWh meter adopts the form of external current transformer, which is easy to install; The power line of the line does not need to be directly connected to the energy meter, and the power line of the line under test passes through the current transformer and connects the signal output line on the secondary side of the current transformer to the corresponding CT kWh meter current ...
Gascard NG For developing solutions for an automated greenhouse, Edinburgh Sensors offer full pre- and post-purchase technical sales advice on all products and guidance on interfacing their NDIR sensors with data logging or control systems. The Gascard NG and Guardian NG have onboard R323 connectors or optional Ethernet support and the Boxed Gascard has a USB option as well. The ...
VPStudio 2.4 has the following benefits: Auto detection Universal Interface Better protected and more organized data files Auto connection Connect your device meter via USB, or via the USB to RS485 converter, and it will be connected automatically. No more hassle with configuration, just plug-in and go! ...
There are various reasons why a wireless data logger may not appear in the MadgeTech 4 software through the RFC1000 wireless network, or experience communication issues. To ensure that the data logger is within range of the RFC1000 wireless network for troubleshooting purposes, the data logger should be in the same room as the computer running the MadgeTech 4 software. It can be re-deployed the ...
For developing solutions for an automated greenhouse, Edinburgh Sensorsoffer full pre- and post-purchase technical sales advice on all products and guidance on interfacing their NDIR sensors with data logging or control systems.The GascardNG and Guardian NGhave onboard R323 connectors or optional Ethernet support and the Boxed Gascard has a USB option as well. The Guardian NG can ...
Gascard NG For developing solutions for an automated greenhouse, Edinburgh Sensors offer full pre- and post-purchase technical sales advice on all products and guidance on interfacing their NDIR sensors with data logging or control systems. The Gascard NG and Guardian NG have onboard R323 connectors or optional Ethernet support and the Boxed Gascard has a USB option as well. The ...
The RadEye SX simulator is based around a DP6 style probe which houses the STS circuitry and detection system and interfaces to a real and unmodified RadEye. This popular system is the first simulator from the RadEye range with work shortly to begin on a radiation survey simulator for the RadEye G10 instrument. ...
In this work, we used experimental data to validate an air-entrainment model that uses a Volume-of-Fluid based method to detect the interface and the Shear-stress transport k-ω turbulence model. The air is detected in a sub-grid scale, generated by a source term and transported using a slip velocity formulation. ...
The instrument started development as a way to detect the bed level interface in a thickener. In the process of testing, both in the laboratory and in an actual operating thickener, it was found to provide data that goes well beyond just bed level detection. ...
The settled layer of particles that forms at the bottom of settlement tanks is referred to as the ‘sludge blanket’, and the interface between the sludge and the water above is detected by sensors, providing a measurement of the blanket level. ...
For this paper, two distinct acoustic techniques were coupled in order to measure both the sediment interface and velocity. For this purpose, a 2 MHz rotating head acoustic profiler and a 10 MHz acoustic Doppler velocimeter (ADV) were jointly installed to survey the position of sediment deposits and measure velocity patterns. ...