Refine by
Ndir Sensor Articles & Analysis
108 articles found
Cubic's self-developed ultrasonic flow sensor achieves high precision utilizing ultrasonic technology and time-of-flight principle. ...
Indicative monitoring uses low-cost, often wireless sensors to collect air quality information with moderate accuracy. The emphasis is on information value—identifying pollution trends and spatial variations—rather than obtaining the most precise absolute measurements.Continuous Monitoring vs Indicative MonitoringContinuous Monitoring (Reference-Grade): High accuracy, regulatory ...
During anaerobic digestion, the balance between CH4 and CO2 directly reflects fermentation efficiency and feedstock performance. High-precision NDIR sensor continuously tracks these key components, allowing operators to optimize substrate ratios, maintain ideal process conditions, and maximize methane yield. The electrochemical O2 sensor serves ...
Cubic Instruments, a leading manufacturer of gas sensors and gas analyzers, builds upon decades of expertise in precision gas measurement to support the global shift toward renewable energy. ...
In response to the global trend, Cubic, a leading manufacturer of gas sensors and analyzers, has developed NDIR refrigerant gas leak sensors which support a wide range of A2L and A3 refrigerants (including R32,R454A, R454B,R454C, R290), with select models certified to UL 60335-2-40 and UL 60335-2-89 standards certified. ...
Cubic Advanced Gas Sensing Solutions for Automotive Refrigerant In response to the industry evolution, Cubic, as an automotive Tier 1 supplier, has developed the automotive refrigerant leakage sensing solution based on advanced NDIR technology, including two in-vehicle sensors: the Automotive Dual Function R744 Refrigerant Leakage Monitoring ...
INTRODUCTION Environmental Material Science ("LiORA") provides a new generation of Internet of Things (loT) enabled non-dispersive infrared (NDIR) water sensors that provide high-resolution quantification of groundwater (GW) petroleum hydrocarbon (PHC) concentrations. The current generation water sensor transmits data at 30-minute intervals ...
ByLiORA
The Groundwater Modeling Problem Nobody Talks About There are roughly 60,000 leaking underground storage tank (LUST) releases in the EPA's active remediation backlog, and over 1,343 active Superfund sites on the National Priorities List.(1,2) The average remediation timeline for both exceeds 10 years.(3) Most of these sites share one thing: either no numerical groundwater model at all, or a ...
ByLiORA
In addition, Cubic offers IAQ transmitters based on NDIR and MEMS MOX technology for real-time monitoring of temperature and humidity. ...
During anaerobic digestion, the balance between CH4 and CO2 directly reflects fermentation efficiency and feedstock performance. High-precision NDIR sensor continuously tracks these key components, allowing operators to optimize substrate ratios, maintain ideal process conditions, and maximize methane yield. The electrochemical O2 sensor serves ...
By measuring the reduction in transmitted infrared light at the specific wavelength, NDIR sensors can precisely quantify gas concentration without consuming the target gas or being affected by chemical contaminants, which offers high gas selectivity, minimal cross-sensitivity, and exceptional long-term stability. NDIR sensors are ...
It emphasizes early detection and warning reliability, aiming to enhance occupant safety in the event of natural gas leaks.Responding to the requirement of NFPA 715, Cubic, a leading manufacturer of gas sensors and gas analyzers, has launched the JT-AM5301 natural gas alarm based on its mature NDIR technology. ...
Cubic has developed a comprehensive portfolio of gas sensors based on core technologies including NDIR, light scattering, MEMS MOX, and electrochemical principles, enabling accurate detection of key indoor air quality parameters such as carbon dioxide (CO2), particulate matter (PM1.0, PM2.5, PM10), total volatile organic compounds (TVOCs), temperature, humidity, ...
R290 belongs to Class A3 highly flammable refrigerants, and its leakage monitoring needs to meet extremely high sensitivity and response speed to avoid potential safety hazards.Facing the challenges of R744 and R290 refrigerant gas leak detection, Cubic, as an automotive Tier 1 supplier, leveraged its mature R&D and manufacturing experience on gas sensors and gas analyzers, ...
To provide more reliable thermal runaway detection, Cubic, as a leading manufacturer of gas sensors and gas analyzers, innovatively combines non-dispersive infrared (NDIR), thermal conductivity (TC) technology and MEMS MOX technology to integrate comprehensive sensor solutions to effectively monitor CO2, H2 and CO released from lithium-ion ...
Cubic mature NDIR technology guarantees the stable operation of sensor for more than 15 years. ...
First, NDIR sensors are highly sensitive and selective to R290 and can accurately detect low-concentration leaks. ...
To effectively optimize the function of air circulation, the modern wall-mounted ventilators now incorporate advanced gas sensors to enable real-time monitoring of environmental conditions, including the level of CO2, particulate matter (PM1.0, PM2.5, PM10), VOCs, temperature, and humidity, thereby adjusting the air circulation accordingly to achieve optimal IAQ.With more than 20 ...
Furthermore, Cubic specially developed NDIR WF6 sensor and SiF4 sensor to maintain the safety of semiconductor manufacturing process. 3. ...
In order to meet the need, Cubic, as a leading manufacturer of gas sensors and gas analyzers, has designed standard industrial 4-series miniature methane sensor, SJH Series, based on Cubic mature NDIR technology, specifically for natural gas vehicle applications. ...