Refine by
Ph Paper Articles & Analysis
11 articles found
In froth flotation, pH sensors need to work in abrasive slurry, fine solids, oily films, and process reagents. That makes the reference junction one of the most important – and most vulnerable – parts of an electrochemical pH sensor.A mining symposium paper comparing wood, nanocoated wood, and PTFE junctions in a copper flotation circuit produced ...
The sensor works by measuring the concentration of hydrogen ions in water, indicating the acidity or alkalinity of the water. The pulp and paper industry is one of the largest users of pH sensors. pH control is essential during pulp bleaching, deinking and washing. The pH sensor provides accurate pH measurement, ...
Milk pH Level: Unraveling the Basics The milk pH level refers to the measurement of the acidity or alkalinity of milk on the pH scale. ...
Keeping pH measurements operational in pulp and paper processes can be a time-consuming challenge. ...
Patient vomited and pushed his OG tube out so a new tube had to be placed. Tube was placed and PH was taken using RightSpotpH indicator on 10 mL BD syringe. PH indicator immediately turned to a gold color closely matching that of 4.5 or less. I pulled several mL’s through indicator and removed indicator to place drops on PH ...
Have you ever asked yourself why you need an electrode for the endpoint detection in Karl Fischer (KF) titration? Theoretically, the endpoint of a Karl Fischer titration could be determined based on the color change of the reagent. However, if accuracy and reproducibility are important, endpoint detection with a double Pt electrode is a much better choice. As the indicator electrode ...
A broad spectrum of efficacy, a long-lasting success and a good compatibility with other paper chemicals such as dyes or optical brighteners are some of the advantages of this technology. ...
The effect of the anionic surfactant on the permeation properties of the nanofiltration (NF) membranes used for chromium(III) recovery from saline solution at low pH have been presented in this paper. The membrane surface layer performance periodically modified by sodium dodecyl sulphate (SDS) solution has been studied with measurements of zeta potential, ...
The input variables analysed in this paper are: water pH, water temperature, total phosphate, nitrites, ammonia, iron, manganese and electrical conductivity. ...
In the moderator system of some nuclear power plants, subsequent to the activation of the safety shutdown system, Gd3+ is removed by ion exchange prior to reactor start-up. During this process, the pH of the system water can get lowered to 3 due to generation of HNO3. Colmonoy-6, which is weld-deposited over valve internals, was found to corrode considerably at this ...
Paper making Black Liquor (BL) difficult to treat. Acid-producing White Rot Fungus (AWRF) was used to regulate the pH and convert the lignin in paper making BL into forms more easier to degrade. ...