Refine by
Polymer Preparation Articles & Analysis
30 articles found
Multi-sensor sorters achieve 95–99% purity for polymer fractions and 97–99% for metal alloy fractions in typical battery recycling applications. ...
The backing layer is prepared with the same polymer solution as the needle tip, and polyvinyl alcohol is used as the backing film-forming material to support the microneedle fractions, so that the backing layer has a tight bond with the microneedle tip, and the backing film and the needle tip can be consistently detached from the mold when the film is uncovered, ...
This article provides an overview of different technologies used for microneedle preparation, including 3D printing, etching, photolithography, and micro-electromechanical systems (MEMS) technology. 3D Printing Technology for Microneedle Preparation 3D printing technology offers a promising avenue for precise fabrication of microneedles with customizable ...
Compared with small organic molecules, organic polymer films can be prepared by a simple solution method without complicated experimental techniques and equipment, and can also obtain higher carrier mobility, and are suitable for making flexible devices. Transistors prepared by polymer/macromolecule films have significant ...
According to the materials selected for preparation, the hollow microneedles can be divided into silicon hollow microneedles, metal hollow microneedles, and polymer hollow microneedles. Due to their good biocompatibility and flexibility, polymers are the development direction for the preparation of new microneedles. ...
There are two types of hydrogels prepared from polymers: physical crosslinking and chemical crosslinking. ...
The OLED inkjet printing uses solvents to melt OLED organic materials and subsequently prints materials on the surface of substrates to form R (red), G (green), and B (blue) organic light-emitting layers. Inkjet Printing Polymer Materials Due to the greater molecular weight of polymers, solution processing was mainly used to form films, such as spin coating or ...
. + Epoxy Coating, Wet Parts = CS + Galvanizing 1 + 1 pcs. of Automatic Polymer Preparation & Dosing Unit (Capacity: 1.000 l/h); Material: AISI 304 1 + 1 pcs. of Ø 800 x 1.200 mm. ...
Customer: BIOTHANE systems International BV Project Name: European Foods Manufacturing year: 2002 Scope of supply 1 pcs. Polymer Preparation Unit Automatic, 1m3 capacity 1 pcs. Ø 9 m. ...
Customer: BIOTHANE Systems International BV Project Name: Kashira WWTP Manufacturing year: 2002 Scope of supply 2 pcs. of Settler 1 pcs. Polymer Preparation Unit Automatic, 1m3 capacity 1 pcs. Ø 6 m. ...
It was developed to provide a solid plasticizer or polymer to replace liquid plasticizers that would make PVC flexible without concerns of plasticizer migration. ...
An anion-functionalized nanoporous polymer was successfully prepared by quaternary ammonization and anion-exchange treatment method. The polymer was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, N2 adsorption/desorption isotherms and thermogravimetric analysis. Batch experiments were conducted to ...
The heart of the BaiPod Container range is represented by the BaiDec 65Lv high performance centrifuge decanter with all necessary ancillaries such polymer preparation station, control panel with PLC logic completely automated operation, feed pump, polymer dosing pump, flow meters, screw conveyor, interior lighting with 6 double 58WWx2 ceiling ...
In this paper, a high performance adsorbent (hydrous manganese oxides onto acylamino and hydroxyl functionalized hydrogel) containing manganese oxide was prepared by the cross-linking polymer; the novel composite adsorbent has an excellent adsorption for Hg(II) removal. ...
Resource-efficient bis-hydroaminomethylation of the castor oil derived renewables methyl 10-undecenoate and 10-undecene-1-ol with piperazine furnished linear, bifunctional molecules. A structured and sustainable path towards a novel polyester from these monomers was developed. Key to success was the selective crystallization of the linear product directly from the crude reaction mixture in ...
BySusChem
The sorption isotherm of copper ions onto a prepared polymer sorbent has been studied and the equilibrium data were analyzed using Langmuir and Freundlich isotherm models. ...
ThT–embedded poly(vinyl alcohol) (PVA) polymer films and nanofibres were prepared by spin coating and electrospinning, respectively, and the fluorescence lifetime distribution was obtained by FLIM. ...
Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vibration sample magnetometry were used to characterize the obtained magnetic adsorbent. EDS and XPS showed that APTES polymer was successfully introduced onto the as-prepared Fe3O4/APTES particle surfaces. ...
In this study, the effects of the content of carbon black (CB) nanoparticle on the morphology of the emulsion polymer blends were investigated. The immiscible polymer blend was prepared with polystyrene (PS) and polypropylene (PP) in the absence and presence of different contents of CB nanoparticle in a twin screw mini extruder. ...
An experimental study was carried out to synthesize hollow fiber membranes from polyethersulfone (PES) and polyacrylonitrile (PAN) polymers to fabricate modules for surface water treatment and clarification of fungal enzyme broth. Design drawings of a manual hollow fiber spinning machine and spinneret were prepared to fabricate the necessary equipment for ...