Portable Infrared Analyzer Articles & Analysis
28 articles found
” This is relevant to all oil in water measurements that use liquid-liquid extraction whether the analysis is done by infrared, gravimetric or UV. If such an emulsion cannot be broken by any attempted means, the test method may not give representative results for the problem sample. ...
Spectro Scientific (Chelmsford, MA), which specializes in water analysis instruments and software, recently introduced Version 5 of its FluidScan® portable infrared oil analyzer. FluidScan provides a quick answer to whether an industrial or lubricating oil is fit for use. ...
Analytical testing equipment is essential to this goal. Portable mid-infrared analysers offer a quick analytical method to assess the blend ratio of either biodiesel in diesel or ethanol in gasoline and can be a valuable asset not only for distributors and terminal managers who blend the fuel, but also for finished product testing by fleet operators and ...
Emergency response and initial remediation activities were undertaken, but the remainder of this article will describe an environmental investigation that was subsequently conducted by Hazclean Environmental Consultants using a portable multiparameter FTIR gas analyzer from Gasmet Technologies.Background Over 17,000 gallons of Resin Oil Heavies were released ...
Emergency response and initial remediation activities were undertaken, but the remainder of this article will describe an environmental investigation that was subsequently conducted by Hazclean Environmental Consultants using a portable multiparameter FTIR gas analyzer from Gasmet Technologies. Background Over 17,000 gallons of Resin Oil Heavies were released ...
The InfraSpec VFA-IR Spectrometer for Biodiesel Blend Measurements: The InfraSpec VFA-IR Spectrometer is a portable infrared analyzer that provides on-site analysis of biodiesel in diesel in less than a minute. ...
Tins is relevant to all oil in water measurements that use liquid-liquid extraction whether the analysis is done by infrared, gravimetric or UV. If such an emulsion cannot be broken by any attempted means, the test method may not give representative results for the problem sample. ...
Mid-Infrared (Mid-IR) spectroscopy is widely used for lubricant formulation and evaluation because of the detailed information on chemical composition provided by this technique. In recent years, it has been deployed as a condition monitoring tool in laboratories worldwide providing degradation information of in-service lubricants by measuring properties such as Oxidation, Nitration, Sulfation, ...
Oil analysis is a critical predictive maintenance technology. Service or reliability profes-sionals, whether managing a truck or locomotive fleet, a marine vessel or fixed assets in an industrial plant, rely on oil analysis information to schedule maintenance actions. The need to continuously improve uptime and reduce maintenance costs demands in situ oil analysis results for better ...
Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on off-shore and on-shore drilling platforms for well over 45 years. ...
The chart below shows a comparison of a five way sample split analyzed on two InfraCal TOG/TPH Analyzers and at three laboratories. ...
On oil rigs where real estate is at a premium, infrared analyzers such as the Wilks InfraCal TOG/TPH Analyzers are compact (typically 6 inches or 15 cm square, weighing less than 5 lbs) and rugged enough to withstand salt air and a rustic lab set up. ...
” With oil in water analysis, I often wonder if the industrial wastewater industry talks to the produced water treatment end of the oil industry. Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on offshore drilling platforms for well over 45 years. ...
A White Paper entitled, “Solvent Choices for Infrared Testing of Oil and Grease in Water” was recently published by Wilks Enterprise, Inc. ...
InfraCal TOG/TPH Analyzers, based on field-proven infrared technology, enable non-technical users to obtain accurate measurements with a few simple steps. ...
The InfraCal TOG/TPH Analyzers are used worldwide for this particular type of measurement. ...
On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc. The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, ...
On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc. The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, ...
A quick on-site analysis with a portable mid-infrared based analyzer, such as the Wilks InfraCal Ethanol Blend Analyzer can help fuel blenders quickly flag out-of-spec product and ensure the final blend meets specifications. This article demonstrates the advantages and cost savings of using portable infrred ...
Wastewater professionals who are enforcing industrial effluent standards for fats, oil and grease (FOG) either must perform numerous gravimetric tests or spend a considerable amount of money with a contracted testing laboratory. Infrared analysis. using portable instruments such as the InfraCal TOG/TPH Analylzers -provides an alternative which will significantly ...