Pressure Leaf Filter Articles & Analysis
9 articles found
THE SOLUTION The Amafilter® team advised the customer that the Versis® pressure leaf filter system would be capable of delivering the quantities of rapeseed oil and cake they required. ...
Similar to the first step, the Amafilter® team advised to install another two Versis® pressure leaf filter systems, each with a filter area of 40 m². These pressure filter systems function in the same capacity, with one operating and the other on standby. The Versis® ...
Increasing the production life of sulphuric acid production units from 16 to 24 months. Amafilter ® provided the customer with a two vessel skid mounted ceramic cartridge filter system. Installation of the system reduced the solid content in the liquid sulphur to max.10 ppm, significantly increasing the production life of the sulphuric acid production units from 16 to 24 months, before any ...
Background More than a decade ago, Farrington Oils, a leading producer of cold pressed rapeseed oil, installed the Amafilter® Versis® pressure leaf filter system at their plant, to remove impurities and clarify the oil. ...
The Solution The Amafilter® team advised the customer that to meet their objectives they would need to install three Versis® pressure leaf filter systems providing 120 m² filter area. The Versis® system is extensively used in edible oils applications and proven to efficiently filter 3-5% ...
THE SOLUTION Amafilter® carried out pilot tests using a pressure leaf filter system but concluded that this was not an effective filtration solution for this application as it led to problems during cake discharge. ...
THE SOLUTION After considering the plant’s requirements, Amafilter® recommended the use of their RBDCD 1250/25/17 horizontal pressure leaf filter system for the customer’s grapeseed oil application. ...
The Challenge The gelatine plant was operating an horizontal pressure filter leaf system for the filtration of think liquor gelatine. The horizontal pressure filters leaves required frequent changes and as the system was not automated, this necessitated significant man hours, resulting in additional maintenance ...
Sintered wire mesh laminates is multi layer of wire mesh / wire cloth diffusion bonded by sintering process under high temperature and pressure. Each layer of the wire mesh is carefully inspected and cleaned, then laminated and spot welded to form a multi layer plate. After the plate is put into the sintering furnace under high pressure and temperature within ...