Refine by
Process Gas Desulfurization Articles & Analysis
18 articles found
By converting waste into electricity, waste-to-energy (WTE) plants play a critical role in supporting circular economy and sustainable urban development.However, the incineration process generates complex flue gas streams containing a wide range of pollutants, including:Carbon Monoxide (CO) Nitrogen Oxides (NOx) Sulfur Oxides (SOx) Hydrogen Chloride (HCl) ...
Membrane separation. 2.- Within the wet desulfurization processes . Wash with sodium hydroxide (NaOH). In one stage and in two stages. ...
Incineration plant - SolidFlow 2.0 Customer: Incineration plant (Germany) Material: Hydrated lime Installation: Insulated free fall shaft downstream of a screw conveyor Function: Optimization of the lime hydrate-water dosing ...
ByENVEA
Processing Wastewater to Meet Regulations Because coal combustion produces gases that react easily with other substances to form compounds that can be a risk to human health, coal-fired power plants “scrub” these pollutants, particularly sulfur dioxide, from their exhaust emissions through a process called flue gas ...
Exhausted emissions from inefficient biogas combustion would also result in methane being expelled into the atmosphere, which is a particularly harmful greenhouse gas. It is important, therefore, that distinct feedstocks are characterised in-depth to measure critical gas species production and ensure optimal process control for a new generation ...
Industrial wastewater from the flue gas desulfurization (FGD) process is characterized by the presence of trace elements of concern, such as selenium (Se) and boron (B) and relatively high salinity. ...
Flue gas desulfurization (FGD) wastewater treatment by conventional neutralization, chemical precipitation and coagulation process removes most suspended solids and heavy metals, and provides an effluent rich in calcium, alkalinity and chloride, which obstructs its reclamation and reuse but is in favor of phosphorus (P) precipitation. ...
A biotrickling filter (BTF) was used to investigate the elimination of flue gas adsorbent containing sulfite, sulfate, and hydrosulfate; it was undertaken to replace the regeneration step of dual-alkali flue gas desulfurization. Sulfate-reducing bacteria (SRB) isolated from landfill leachate were inoculated, and overall desulfurization performance as well as impact resistance was evaluated. The ...
HPF (H: hydroquinone; P: dinuclear cobalt-phthalocyanine sulfonate; F: ferrous sulphate) coking desulphurisation waste solution (CDWS) produced from coking oven gas desulphurisation process is an extremely harmful pollutant. The fundamental natures of this solution, which involves its main ingredient and content, type of organic matter, thermal decomposition characteristics of salt, and ...
Using process simulation, this paper analyses the effect of operating conditions on desulphurisation selectivity in high–sulphur gas sweetening process. Furthermore, various influences of the operating conditions on energy consumption were compared by means of a sensitivity analysis tool. The conclusions are: a lot of H2S and CO2 require removed simultaneously from high–sulphur gas, which lead to ...
The hybrid zero-valent-iron (hZVI) process is a novel chemical treatment process that has shown promise for removing heavy metals and nutrients from industrial wastewaters. In this study, a pilot-scale demonstration was conducted to continuously treat 3.8–7.6 L/min (1–2 gpm) of the flue-gas-desulfurization (FGD) ...
The hybrid zero-valent-iron (hZVI) process is a novel chemical treatment process that has shown great potential in previous laboratory and field bench-top scale tests for removing selenium, mercury and nutrients from various industrial wastewaters. In this study, a pilot-scale demonstration was conducted to continuously treat 3.8–7.6 L/min (1–2 ...
Water quality requirements for each process were established to identify areas where water was used inefficiently and where reuse opportunities existed. ...
The process needed to be flexible enough to operate within a 60–110% range of gas flow conditions, and be easy enough to operate largely unattended. ...
Significant progress has been made in the last 25 years in the control of emissions resulting from the burning of sulfur bearing fuels and from other industrial processes. The dominant desulfurization technology today is limestone or lime-based scrubbing in various forms. ...
Over the past five years, the CANSOLV® system SO2 scrubbing technology has moved from the status of an emerging technology to that of a commercially realized and technically proven process for economical and highly selective regenerable SO2 capture from gas streams. Since May 2002, Cansolv Technologies, Inc. (CTI) has successfully realized startup of three commercial applications ...
ABB's seawater scrubbing process (the Flakt-Hydro process) for flue gas desulfurisation has recently triggered much interest among power producers because of its simple operating principle and high reliability. The process uses seawater to absorb and neutralise sulfur dioxide in flue gases. The absorbed gas is oxidised and returned to the ocean in the form it originated in the first place, namely ...
Natural gas is favored over the other feedstocks from an environmental perspective. Ammonia production from natural gas includes the following processes: desulfurization of the feedstock; primary and secondary reforming; carbon monoxide shift conversion and removal of carbon dioxide, which can be used ...