Produced Water Separation Articles & Analysis
9 articles found
With droughts plaguing the country, there’s a corresponding demand for wastewater treatment to turn brackish produced water from oilfields into water that’s safe for discharge, irrigation, and oilfield operations. ...
Produced water is a byproduct brought to the surface during oil and gas exploration and production. Sometimes it is called formation water, brine, or saltwater. It is typically brackish and comes from underground formations, either from zones adjacent to the oil and gas, or from the same zone as the hydrocarbons. In some oil and gas operations, the produced water results from injecting clean ...
Application: Chemical wastewater Scale: 20 tons / hour * 2 Process: UF-MTNF-MTNF, UF-MTRO-MTRO Time: 2015 INTRODUCTION In the treatment of high-salt, high-temperature, high-pH chemical production wastewater, Jiarong uses a tubular ultrafiltration membrane plus two-stage nanofiltration membrane treatment process to separate the different salts in the wastewater, and ...
Multistage wastewater treatment and desalination allow produced water to be recycled for irrigation A Colombian oilfield with higher-than-average amounts of produced water turned to Fluence for a solution that would purify the water for reuse in irrigation. ...
The suggested cycle can save energy around 46% in comparison with a system producing cooling, power and hot water separately. Moreover, the second law efficiency of the combined system is around 30% which can be obtained under the given conditions. ...
Husky awarded a contract to the 50/ 50 joint venture partnership between SNC-Lavalin and PCL for the project’s Central Plant facilities. Aquatech received the water treatment order from SNC Lavalin. The Water Treatment Solution Water requirements for steam generation will come from non-potable salient water sources plus ...
The Problem The California Energy Commission’s Energy Facility Licensing Process required Roseville Energy Park to be a ZLD site and use alternative sources of water for their cooling discharge water needs. The Solution To provide savings in capital cost, operating cost and more operational flexibility to handle fluctuating water ...
The injection well provides the formation with hot water and the second production well is the conduit for oil and water to be removed from the ground. The oil is first separated from the produced water with an IGF and then water is polished with the HDBF, prior to re-injection. The ...
CETCO Oilfield Services handled the temporary production streams from oilfield operations on the platform for over 8 months to include oil and gas separation, produced water filtering, and proper discharge. All MMS, EPA, NPDES and customer requirements were met during the duration of the ...