Refine by
Sludge Removal System Articles & Analysis
32 articles found
A Solution Built for Nitrification MABR is commonly applied alongside activated sludge systems for total nitrogen removal. In contrast, biofilm-only MABR is a more focused configuration designed specifically to convert ammonia into nitrate. ...
Challenge Greg and his team have a 3 cell system, one 6 acre lagoon and two 2 acre lagoons, that were becoming inundated with sludge. The ponds were about 30 years old, not aerated, and have never been dredged or treated to remove ...
Secondary Treatment Secondary treatment aims to substantially remove and degrade the biological content of the wastewater. This is achieved by utilizing processes like attached growth systems or suspended growth systems. ...
Here's a step-by-step breakdown of how a multi disc screw press works: 1. **Sludge Inflow:** The sludge, a semi-liquid mixture of water and solid waste, is first introduced into the system. 2. ...
Solids settling is a critical aspect of most water treatment applications. Whether a tank utilizes a form of advanced solids settling through the use of tube settlers or plate settlers, or if the basin has a simple open clarifier design, solids that amass on the floor must be periodically removed. One way to achieve this sludge collection is by draining the tank and manually sweeping the basin ...
Luckily, there are more practical solutions available to help maintain a basin floor free from excessive sludge accumulation. Traditional System Designs While solids removal system designs vary, they all serve the same goal: to remove sludge from the basin floor. ...
. + Epoxy Coating, Wet Parts = AISI 304. Rehabilitation of all Scum Removal & Sludge Removal Systems of 4 pcs. Ø 55 m Cantilever Type SST Scraper Bridges (with Weirs, and Scum Removal Pumps) ; Wet Parts = AISI 304 ...
The study compared SedVac side-by-side with a traditional header pipe sludge removal system under tube settlers and in identical conditions. ...
Application The Beaufort-Jasper Water & Sewer Authority required a sludge removal system with a low profile for easy integration below tube settlers. SedVac was chosen based on its ability to be incorporated into the existing basin with minimal infrastructure changes and its successful pilot at the facility – it removed ...
Application The Beaufort-Jasper Water & Sewer Authority required a dual solution for particle settling and sludge removal. Brentwood was able to offer its tube settlers for increased settling capacity and the SedVac system to remove sludge from the basin floor upon settlement. Together, the two ...
Gillibrand owns and operates an Automated Radio Remote Controlled FLUMP™ Sludge Removal System manufactured by SRS Crisafulli. The dredge is used primarily in the manual mode as the duty cycle duration required was not nearly as long as was anticipated by the customer. The operation is from a shore based control panel. The dredge is used to ...
Several meetings later, the principals decided to invest in a dredging system and a dewatering device. The system had to be completely portable as they were intent on doing work anywhere they could secure projects. ...
Excessive lagoon sludge accumulation contributes to the poor performance of any treatment system. ...
In this study, bisphenol-A (BPA) removal from synthetic wastewaters using a laboratory-scale activated sludge system was achieved. Activated (biotic) sludge was used for BPA elimination, whereas inactivated (abiotic) sludge was used during the adsorption study. ...
The objective of this study is to improve knowledge on the integrated fixed-film-activated sludge (IFAS) system designed for nitrogen removal. Biofilm growth and its contribution to nitrification were monitored under various operating conditions in a semi-industrial pilot-scale plant. Nitrification rates were observed in biofilms developed on ...
Four physical–chemical processes were compared in terms of the efficiencies of dissolved and colloidal organic nitrogen (DON and CON) removal from the secondary effluents (SE) and reject water from full-scale biological nutrient removal activated sludge systems. ...
Regularly boiler maintenance will prolong the life of your boiler and improve efficiency, saving you money. Over the years sludge can build up within the system making it work harder, causing it to be inefficient and expensive to keep. A planned maintenance will flush the system, removing the sludge and other ...
The hydrolysis process of slowly biodegradable substrate (XS) has an impact on the efficiencies of nutrient removal in activated sludge systems. Measurement of oxygen utilization rates (OURs) and corresponding chemical oxygen demand (COD) is accepted as a very useful tool to reflect the consumption of biodegradable substrates. The influence of ...
Separation of Settle-able Solids: Separation of settle-able solids by sedimentation during primary clarification is the physical treatment process of removing settle-able solids before biological treatment. This process is executed in a Primary Clarifier which is explained below: Process wastewater enters the clarifier tank and settle-able solids (sludge) are ...
A subcontractor to WaterSolve, SRS Crisafulli, Inc., Glendive, MT, a manufacturer of sludge removal dredge systems, will be providing the dredge, float line, and operator/trainers to this two week project, located 270 miles northwest of the Glendive factory, just the other side of the Charles M. Russell National Wildlife Refuge. Montana Rural ...