Sorbent Product Articles & Analysis
5 articles found
Dry Scrubbing: Spray Dryer Absorber (SDA): Dry scrubbing involves injecting dry sorbent (typically lime or hydrated lime) into the flue gas stream. The sorbent reacts with SO2, forming solid particles that are captured in a particulate control device. ...
Abstract There presently exists no industry recognized test protocol for the evaluation of a sorbent product within a simulated environment fundamentally analogous to typical field conditions. Of particular note, existing standards do not offer a method for quantifying sorbent performance when deployed for the recovery of oil on water or ...
ByOHMSETT
One of the possible solutions to this problem is the application of sorbents with high disinfection efficacy. In this study, the opportunity of producing sorbents with biocidal properties based on non-oxidizing biocides and anion exchange resins (AERs) was investigated. A wide range of different type of AERs were tested for the ability to sorb biocides ...
EPA Method 30B (EPA mercury emissions reference method – sorbent trap mercury method) was used successfully to support mercury emissions measurements for the 2010 EPA Information Collection Request (ICR) on coal and oil fired utilities as well as a series of additional ICR source types (cement, steel etc). The use of the solid sorbent mercury ...
Therefore, a new online detection system, based on a sorbent KNiFC-PAN for effective 134Cs and 137Cs activity, was developed. This sorbent was compared with another type of sorbent, Nifsil, and results are presented in this paper. ...