Refine by
Tramp Metal Articles & Analysis
27 articles found
Equipment Protection Shredders, granulators, hammer mills, and ball mills represent substantial capital investments. Hard tramp metal such as tool steel fragments, bolts, and bearing components entering equipment at speed causes rotor damage, bearing failure, and unplanned downtime. ...
Features like automatic belt tracking, vibration monitoring, and tramp metal detection prevent costly secondary damage from operational issues. ...
In fact, cutting fluid wastewater contains emulsified oil, additives, and impurities such as waste oil, dust, and metal chips which are difficult to treat. Nowadays the processing of metals by cutting becomes impossible without the use of emulsions and lubricants. ...
ByYASA ET
Designed with rock crusher technology, our horizontal wood grinders are extremely tolerant of contaminants, rocks and metal without catastrophic maintenance costs if metal enters the grinding chamber. The Rawlings HZX is protected by an Anvil Safety Shear Swing Away Feature , that allows metal and other damaging objects to drop through on ...
“With approximately 207,000 miles of occupied track in the United States and supporting crossties of approximately 3,000 per mile, railroads have approximately 620 million crossties currently in used in the U. S. Ties wear out through normal decay, insect attack, and physical impact and abrasion and as the result of derailments, rail modifications, or other causes. Approximately 23 million ...
Effectively protecting the crusher from rogue tramp metal damage prevents production losses and repair costs. The wide range of available crushing technology enables the production of optimally sized aggregate. Whereas Jaw and Gyratory designs commonly feature as primary crushers, secondary stage crushing often involves Cone Crushers. Whether primary or ...
Repair and refurbishment convert a well-used, functional magnetic separator into almost new, further extending the life of the equipment. One of Bunting’s latest repair and refurbishment projects involved a 6-year-old Electro Overband ...
When re-processing in-house plastic rejects and waste, the purity of the final recycled plastic mix must be equal or at least very close to the original raw material. Whether the re-processed plastic is for in-house use or as regrind for resale, the removal of any metal contamination is critical. Successful removal of metal contamination from waste plastic for recycling and reuse often requires ...
The Chute Magnet Separator or Magnetic Slide is a simple but important laboratory-scale wet magnetic separator for any material test facility. This magnetic test equipment enables the assessment of a particle’s magnetic susceptibility, which provides the platform for further tests on specific wet magnetic ...
A UK processor of Potassium Chloride is using two Pneumatic Inline Magnets (PIMS) to capture and remove small tramp ferrous metal. The metal is removed early in the process, as the dry material is being pneumatically conveyed, to prevent damage to processing equipment including the crusher. ...
When fine iron and iron-bearing minerals contaminate the raw material used to produce ceramic tiles, the consequences are costly. Such iron contamination causes visual and structural defects as well as affecting the surface finish in terms of brightness and whiteness. Tiles failing final quality checks are commonly returned for recycling. Those passing the initial quality check are classed as ...
The Inline Magnet is a versatile and popular magnetic separator used widely to capture tramp ferrous metal contamination. The non-obstructive design suits applications in many different applications including food processing and plastics. ...
If larger tramp metal (e.g. nails, nuts, rust, etc) remains undetected it enters the size reduction stage. Such tramp metal often damages process equipment, with magnetic separators and metal detectors installed to capture and remove the metal. ...
The rise of affordable high-performance OES analysis Tightening of industry regulations, complex supply chains and increased use of scrap as a base material means it’s crucial for foundries and metals manufacturers to control tramp and trace elements in the lowest ppm range. ...
They are to be cleaned and checked regularly to make certain they are doing the job of removing metal and other material from the feed. Periodic inspection of the die for presence of foreign material is advisable. Pieces of tramp metal which have become embedded in the die should be removed by punching or drilling from the outside end of the ...
Typical applications include: Recycling Recovering metal from waste or purifying secondary materials by removing metals is vital for successful recycling. ...
During mechanical handling, raw material often becomes contaminated with tramp ferrous and non-ferrous items. This metallic contamination may come from a variety of sources. ...
The compact design makes it ideal for applications including oil/water separators, "tramp oil" removal from metal cutting machine coolant reservoirs, central coolant systems, parts washers, waste water treatment oil/water equalization tanks, and hundreds of other applications. ...
Thermo Fisher offers a comprehensive line of bulk weighing and monitoring products including conveyor scales, automatic sampling systems, weighbelt feeders, tramp metal detection, coal and mineral sampling systems, level indicators and conveyor safety switches. ...
Customer: Midwestern Manufacturer of metal stampings and machined parts for the Automotive Industry. The Problem: Tramp Oil collecting in metal working coolant. ...