Refine by
Voc Control Process Articles & Analysis
9 articles found
Process exhaust passes directly through the combustion chamber, making DFTO technology particularly suitable for applications with medium to high VOC concentrations.DFTO systems are commonly used for:Chemical manufacturing exhaust treatment Pharmaceutical solvent emissions control Petrochemical VOC abatement Printing and ...
However, the manufacturing process generates significant volumes of volatile organic compounds (VOCs), which require effective treatment before atmospheric discharge.As a professional photovoltaic raw material exhaust gas treatment manufacturer, CADAIR provides advanced VOC treatment systems specifically designed for photovoltaic material ...
The remaining air is used for the pneumatic valves used for process control. Since the mechanical sorter requires the most air in the entire system, an air quality of 110 psi and 45 cfm is necessary. ...
Therefore, in industrial activities that are susceptible to generating VOC, emissions must be controlled and, when necessary, treated efficiently, with the use of VOC removal (or VOC abatement) systems. ...
ByENVEA
The Whirl Wet also facilitates a process where moisture must be removed under negative pressure, (standard design is 20" of negative pressure) its fan pulls out the moisture-laden air, saving process time and steps. The Whirl Wet removes a substantial amount of particles from the airstream. To control process odors and ...
Typical VOC concentrations treated through the VOC abatement process range from about 20 to 50 ppmv during normal operations. The treated air volume of 105,000 SCFM is reduced to about 1,500 cfm by stripping the adsorbent in the desorber to renew media capacity. The process concentrates the VOCs by a factor of ...
The project commenced when Heceygo contacted Tecam Group to look for technology equipment to satisfy their needs in terms of VOC emissions abatement. After moving to new facilities in 2008, Heceygo decided to focus on improving the quality of their processes, as well as reducing environmental impact, in particular VOC emissions. ...
ByTECAM
The project commenced when Heceygo contacted Tecam Group to look for technology equipment to satisfy their needs in terms of VOC emissions abatement. After moving to new facilities in 2008, Heceygo decided to focus on improving the quality of their processes, as well as reducing environmental impact, in particular VOC emissions. ...
ByTECAM
For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification ...