density-testing Downloads
54 downloads found
The PaveScan RDM 2.0 is our second-generation asphalt density assessment tool that is ideal for uncovering inconsistencies that occur during the paving process, including poor uniformity and significant variations in density. By detecting these problems, PaveScan RDM 2.0 helps to avoid premature failures such as road raveling, cracking and deterioration along joints. ...
6825 Jimmy Carter Boulevard, Suite 1210 Norcross, GA 30071678-406-0106678-367-0870 (fax)www.dataforensics.netWant More ControlOver YourConstruction QA/QC Projects ?Data management for density testing, concrete testing, special inspections and other QA/QC related projects has never been so easy. ...
Purpose-built for rapid solution creation and faster throughput in manufacturing test of wireless components, power amplifiers, and RF front-end modules. Increase test density and reduce your footprint with up to four VXT instruments in one 18-slot chassis. ...
SDI is an acronym for Silt Density Index and it is a measure of the amount of particulate contamination in a Sample of water. Another commonly used acronym for SDI is Fle.g. Fouling Index. Silt Density Index(SDI) testing is most often used to estimating the rate at which colloidal and suspended Matter fouling will occur in a water ...
The MC-1 Elite is the most accurate and easy-to-use moisture/density testing instrument available. MC-1 Elite offers a superior alternative to other methods of in-place testing. Results are displayed on an easy-to-read LCD screen. The simple on-screen instructions allow the software operator to be quick and ...
The ERWEKA SVM series has been designed to measure tapped volume and tapped density of powders, granules and similar products. It is available for holding one or two glass cylinders and works according USP method 1 (300 strokes/min; stroke height 14 mm) or USP method 2 (250 strokes/min; stroke height 3 mm), which is equal to Pharm.Eur. and DIN ISO EN 787/11 requirements. As a special version, the ...
LAST-A-FOAM® TF-5070-07 FLEXIBLE POLYURETHANE FOAM Property English Metric Test Method Density (pcf) (kg/m^3) 7.0 112 ASTM D-3574 Load Deflection (psi) (kPa) ASTM D-3574 @ 75°F: Stress at 10% 3.5 24 @ 75°F: Stress at 50% 6.0 41 Percent Compression (%) (%) ASTM D-3574 @ 158°F 4 4 Fire Safety Pass Pass*via test ...
Please contact Triad to ask about other services which may not be listedTRIAD Listens, Designs & Deliverswww.triadeng.com CONSTRUCTION MONITORING, TESTING AND INSPECTION SERVICESQuality Assurance/Quality Control (QA/QC) construction monitoring services have been core specialties since Triad was founded in 1975. ...
The MC-1 Elite is the most accurate and easy-to-use moisture / density testing instrument available. MC-1 Elite offers a superior alternative to other methods of in-place testing. ...
Please contact Triad to ask about other services which may not be listedTRIAD Listens, Designs & Deliverswww.triadeng.com Soil Classification (Atterberg Limits and Grain Size Distribution) Moisture Content Specific Gravity Soil pH Organic Content Natural Density and Moisture Content Moisture-Density Relations (Standard and Modified) ...
ADCS002.dwgAirfield Systems, LLC 8028 N May Ave, Suite 201 Oklahoma City, OK 73120 (405) 359-3375 www.airfieldsystems.comUnit Panel Specifications: Size: 32" x 32" x 1"Weight: 3.1 lbStrength: 233 psi (unfilled) 6747 psi (filled)Resin: 100% Recycled (PIR) Copolymer with Impact Modifier "No Break" ...
It is well known that compaction of soils occurs in the first few passes of a vehicle, so the maximum adverse effects on compaction of soil below the pavement should have been achieved. In situ density tests were carried out on the sand below the pavement before and after construction (Figure 1).Page 1Figure 1 - In situ density ...
Based on GM 13 'Standard Specification for Test Methods, Test Properties and Testing Frequency for High Density Polyethylene (HDPE) Smooth and Textured ...
Green Building Council and is used by permission.Lag-Kote®Interior/Exterior Lagging EncapsulantLag-Kote is a 100% acrylic, high solids encapsulant/sealant specifically formulated for application over a variety of Asbestos Containing Materials (ACM). Tested at Battelle Laboratories of Columbus, Ohio, under EPA Contract # 08-03-2552-T2005, Lag-Kote was found to be acceptable as an ...
Sr. No Description of Test Test Method Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer BS 1377 Part 9 ASTM D 6938 4 Dry ...
Premium
The test was conducted at a location 7-m downstream from the entrance area of the wind tunnel test section. ...
B. Soils 1) ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2) ASTM D 698 Standard Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lb/ft3 (600 kN-m/m3)) 3) ASTM D 1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method 4) ...
The device is extremely rugged and is built for day-in, day-out use.items included: Item 1 - Head Assembly Item 8 or 11 - Outer/Inner Rod Assembly Item 18 - Cone Assembly S-215-IM User Manual • Rapid Selection of locations for field density tests • Evaluating backfills in trenches and behind walls • Light foundation investigations • For rapid correlation of ...
Vincent CORPORATION Model Capacity** Screw Motor Length Width Height Weight TPD, DS Lbs/HR RPM Feet Feet Feet Lbs HP CP-4 0.5-1 150-500 30 2 4 1.2 2 500 CP-6 2-4 300-1,000 20 5 7.5 1.5 2.5 1,000 CP-10 5-10 1,500-5,000 16 15 11 2 3 2,700 CP-12 10-20 4,000-16,000 15 20 13 2.5 4 5,000 VP-16 20-45 15,000-30,000 10 30 20 3.5 5 12,000 VP-22 30-85 20,000-65,000 9 50 22 4.5 5.5 25,000 VP-24 ...