drain-fitting Downloads
165 downloads found
Premium
Spill Containment Poly Tank - 275 Gallon Sump Capacity - With Drain Plug. Fits one standard 275-gallon obround tank. Space-saving design for compact installations. Easy tank and pump access for maintenance. Made from rust- and corrosion-resistant polyethylene. ...
System 15® Pipe & FittingsSystem XFR® Pipe & Fittings Drain-GuardTM Double Containment MJ GreyTM Mechanical ...
System 15® Pipe and Fittings, System XFR® Pipe and Fittings, Drain-GuardTM Double Containment, MJ GreyTM Mechanical Couplings, Firestop Systems, Solvent ...
Standard hitch of category 3. New drain tank without fittings to ensure a residual volume of the lowest in its category. ...
$$FEATURES:&• Robust$HighBDensity$Polyethylene$(HDPE)$tank$construction$• Controlled$blue$dye$dispensing$• Compatible$with$all$Greyter$Greywater$Recycling$Systems$• Recommended$Dye:$GreyterBlueTM$• Reservoir$volume:$1.4$liter$(0.37$US$Gal)$• GreyterBlueTM$yield:$Up$to$125$000$liters$(33$021$US$Gal)$• Universal$PowerSupply:$100B230v,$50B60Hz$• Energy$Consumption:$negligible DIMENSIONS:&• ...
EnvironmentalBambi BucketFireflexRemote SiteEmergency ResponseDragonUsed for clean-up operations and spill containment, the Mini-Berm is easily placed under valves and fittings, trucks, drum and machinery. It’s compact enough to fit into tight spaces, yet still built to the toughest specifications, using our rugged chemical-resistant fabrics. Mini-BerMcompact ...
A heavy-duty single cartridge seal specifically designed for maximum reliability in demanding applications. The full-featured gland provides quench and drain capability. Designed to fit ANSI pumps with no modifications for ease of ...
Ideal for capturing liquid under vehicle, remote site refuelling or temporary secondary containment around tanker trucks, the rugged design of the Ride-Side Berm will allow it to be used in the toughest environments.Ride-side beRm™Secondary containment for VehicleSdesiGN FeATUResL-Rod side walls allow operators to quickly setup the berm and provide rigid support for the non-collapsible walls.The ...
THRU HOLESCUSTOMER MOUNTING7.00"178mm6.40"163mm½" BARB FITTING (DRAIN)¼" BARB FITTING (INLET)2.75"70mm4.50"114mmCLEAR ACRYLIC1/16" THK. ...
The quality and precision of the gear cutting allow maximum torque with minimum noise levelShaft Steel - grinding of sealing surfaces- cylindrical hollow with protective cover or output with key in accordance with ISO R773, or hollow with SD shrink disc- tolerance of diameters in accordance with NFE 22-051 and ISO R775- tapped holes at the solid shaft end for fixing connecting devices in ...
The Shank’s Colon Bucket is a specialty item designed to be used during colic surgery. It is fabricated completely out of stainless steel and is equipped with stainless steel swivel/lock casters. The Colon Bucket has a removable stainless steel mesh basket to aid in straining and removal of debris from the colon. It includes a mounted drain fitting, accompanying locking valve and 10 foot ...
Inlet air temperatures can be reduced by 10-20 degrees Fº on most days, and even more under ideal conditions.CT & CN Evaporative Cooling SystemMunters Corporation, Business Area AgHort4215 Legion Drive Mason, MI 48854-1036 USA / Phone: +1 517-676-7070 Fax: 517-676-7078 Email: [email protected] / www.munters.usCT Header• Corrosion resistant extruded aluminum header• Spray deflector ...
Closed cell neoprene » Suction Fittings: ....... 2-4”, blind flanged, total drains » Sparge Line Fittings: ....... 2-1” ball valves with female threads » Filter Panels: ....... 12 total and hinged on wall side of box, 10 are approx. 40”x40”, two panels farthest from door are smaller » First Stage Filter: ....... ...
Gentle product handling (Both whole/destemmed grape and grape skin). Fully manufactured with AISI 304 stainless steel. White FDA approved PVC belt. 2 mm thick steel plate outer casing. 1,5 mm thick steel plate inner casing. Sanitary rubber coated stainless steel drive roll. Reinforced unload section. Stainless steel pipe legs. Inspection and washing side openings. Belt tension adjustment tie ...
Complies with EPA CFR 40 part 112Insta-berm™SECONDARY CONTAINMENT BERM FEATURING L-ROD DESIGN L-rOD DesIGn FeatUresL-shaped rods hold up the walls, yet fold down easily for vehicle entry and exitFully collapsible for compact storage and easy transportInstant deployment without any toolsWide range of standard sizes and custom sizes availableEasily cleaned and maintainedIncludes eyelet patches for ...
Combo Guard™ Curb & Grate Inlet Protection H29982 updated: 02/13 ©2006-2013 ERTEC Environmental Systems (866) 521-0724 www.ertecsystems.com Combo Guard is a patented, low cost, four layer system designed to reduce sedimentation into combination curb & grate storm drain inlets. CG is engineered to balance the critical tradeoff between allowing ...
In addition, tanks should be sited:• 1.8m away from non fire rated eves of a building• 1.8m away from a non fire rated building or structure (eggarden sheds) which have openings such as doors orwindows• 1.8m away from appliance flue terminals• 760 mm away from a non fire rated boundary such as awooden boundary fence.If it’s impossible to comply with these requirements, then afire rated barrier of ...
Design highlights of this series include specially developed stainless-steel plate-type heat exchangers and condensate-separation flow operating on the basis of the demister principle. BEKOMAT condensate drains are fitted as standard.DRYPOINT RS HP dryers comply with Directive ...
The O-Ring seal design provides the versatility to use a variety of filter media of different composition and thickness.Standard Features • 316L SS • Sanitary Clamp fittings • Filter Drain • Filter Vent • O-Ring Gasket • Stainless Steel StandOptional Features • Heating or Cooling JacketApplications • Research & Development • Quality ...
The CT/CW Series, single and double compartment, pump tank assemblies are the most complete, and best constructed available. The CT/CW Series standard sizes range from 140 to 6,285 gallons, with pump sizes from 1.5 to 75 hp. Flow rates can be adjusted on each pump tank, depending on the customerýs needs. We offer complete installation on both Chilled Water Tanks and Cooling Tower Tanks. ...