float-switch Downloads
413 downloads found
Premium
The float switch is made for liquid level monitoring and is appropriate for direct pump control in all industrial ...
Premium
Designed for continuous operation via thermostat control that measures outside the tank air temperature and can be installed through roof hatch without requiring tank entry. Includes float switch for heater protection against dry conditions. ...
Premium
Pump Clamps w/ snubbers at desired levels Pump ON Pump OFF High water alarm/ emergency pump ON Low water alarm/ emergency pump OFF 4. FLOAT SWITCHES The BioSTEP system is supplied with four (4) normally open float switches. Determine the proper level for each float switch in the tank. Install ...
Vertical level regulator suitable for narrow spaces where regular floats do not have enough room to move. At user’s will the floating bodies can be moved along the shaft to regulate the minimum and maximum level. Shaft is available in different lengths. Mouse requires periodic check-ups of its parts. ...
In combination with Probes or Taurus (sold separately) it allows the installation of the control body at a very long distances from the workstations. ...
The rods attached to the body allow the level regulator to work in narrow spaces and in difficult environments with turbulent waters. ...
Optical Float® systems 7-14-08 SECTION 16216 FLOAT SWITCH LEVEL DETECTORS PART 1 GENERAL 1.01 SCOPE A. ...
Float switches for filling. On reaching the lower switching threshold the switching mechanism activates the pump. On reaching the upper switching threshold the pump is switched ...
Series FS-400 Stainless Steel Vertical Float Switches are durable float switches with a wide range of usage and applications. Their compact size, less than 3.5” from top of threads to end of stem, all stainless steel wetted materials, and user-reversible switch orientation, make them any easy choice for OEM, ...
CONNECT INTERNAL CONNECTORSThe unit is shipped with the float switch and buzzer disconnected so it doesn't alarm during shipping. To put into service:• Connect the float switch wires by plugging the green connector into the mating socket.• Connect the buzzer quick-connector.• Re-tighten the box screws.2. ...
Reduced dimensions, the most economic solution for water pumps and plumbing systems automation. ...
Kari cable suspended float switches are capable of up to four switching levels in a single float, and offer 25 different configurations - including some with built in hysteresis. That means you can replace up to four single level float switches with one 4-point level switch. Kari ...
The float switch can be used as water level controller or limiter for steam generators as per TRD 401, 402 or 602. The float switch according to PED directive 97/23/EEC has the CE-mark no. 0035 of the notified body.Applied rules as per TRD/AD2000 or ASME- ...
KA series controls consist of a free-floating switch enclosure to which a protected multiconductor cable is attached. Inside the float there are a number of microswitches set at different angles. A control weight is fixed at a point along the cable to keep the cable immersed in the liquid. The suspended float ...
The 50 Series Liquid Level Sensor is an internally mounted vertical float switch designed for high reliability, making it ideal for most applications. ...
The Side Entry series of single point float switches are manufactured in a range of materials to suit varied applications. Most switches are mounted from the outside of the tank and can be rotated through 180º to give a choice of either open on rise or close on rise switching configuration. Optional changeover ...
Triple chamber float switch for extreme applications. ...