float-switch-controller Downloads
76 downloads found
Applications: • Wastewater Pump Station Level Control • Water and Wastewater Plant Level Control • Storm Water Level Control • Liquid Level Control for Tanks • Holding Pond Level Control • Most Liquid level Control Applications Manufacturer of High Performance Instrumentation and ...
Listed) (For External Transducers and Backup Float Switches) Description: The Triplex Pump Controller II (TPC2) model 11967-5 is a control and display unit which automatically controls up to three single speed pumps. ...
Pump Control Switch (Pump Master) PMP-000-109 Mechanically activated, wide-angle switch 2 HOA Pump Switches*designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC. Used in sewage applications. The switch is not sensitive to rotation or turbulence and may be used in both calm and turbulent ...
The unit can also function as a primary duplex float switch controller. The BUPC provides built-in pump alternation, pump start time delay, and a system alarm to indicate primary control failure. It is designed to work with up to five float switches. When operating as a backup ...
Applications: • Wastewater Pump Station Level Control • Water and Wastewater Plant Level Control • Storm Water Level Control • Liquid Level Control for Tanks • Holding Pond Level Control • Most Liquid level Control Applications Manufacturer of High Performance Instrumentation and ...
The SJE PumpMaster WPS is a mechanically-activated, wide-angle float switch providing automatic control in potable water and water applications. It provides direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC or control applications as low as 120 VAC, 100 mA. It is CSA Certified to meet NSF/ANSI ...
The Upgrade is a complete replacement for all of the troublesome components of a centrifugal pump station, including the old unit’s slide rails, pump/motor, float switches, piping, and motor control devices. • Designed not to jam and for minimum wear to the grinding mechanism • Retrofit simplex or larger stations• Available with a range of ...
Automatic level control is provided by a start and stop float switch. Provisions for a low water cut off float switch, make up control float switch and solenoid valve arestandard on both simplex and duplex units.The completely assembled and wired ...
American drip dispersal process controls are based on the Perc-Rite® patented operating sequence. Panels are available as Simplex or Duplex that operate on a single or multi-zone configuration. Drip controls provide flow equalization with peak flow management and are designed on a repeat cycle timer basis. When a float signal tells the control panel there is enough water to begin a dose, the ...
The REX® Series 1000 Bar Screen is a self-contained chain and rake type screen. The screen can be supplied with either a fixed mounting, or it can be designed to pivot out of the channel. The debris is captured by the bar rack and removed by multiple rakes from the upstream side of the screen. The screen is constructed of stainless steel. The bar screen is designed to operate at regular ...
Simplex demand control panels operate single pumps for residential and light commercial dose-on-demand systems. Each unit operates on either one differential float switch or two narrow-angle float switches for pump control plus one narrow-angle float switch for alarm indication. Simplex controls are typically used when economy is desired, and immediate backup is not necessary. Sufficient storage ...
The SHEF42 Series Pump is a rugged, submersible cast iron pump with a clog resistant, semi-open impeller and solids handling capability to 3⁄4”. Unit has a 4⁄10 HP single phase motor complete with power cord. 2” NPT vertical discharge is standard. A full selection of accessories for automatic operation is available, and includes float switches, duplex controllers, simplex ...
Alderon’s float switch operated water well control panels are the perfect choice for water pumping applications. The control panels are heavy duty, installation friendly and affordable. A simple selection guide makes selecting the correct panel for the job a simple task. Quick and easy installation is accomplished by our detailed terminal block wiring diagram that corresponds to the factory ...
Smoothing Inlet Diverter H. Pump Control Float Switch I. Floating Filter J. Suction Pump K. Overfl ow Device L. ...
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV). Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. ...
ByATMI
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV) .Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. ...
ByATMI
This results in an increase of liquid level in the trough. An adjustable float switch controls the supply of fresh fabric when the liquid level in the trough has reached a pre-determined height by switching on the motor drive for the wire mesh-belt, carrying the filter fabric. ...
.• Single-phase version with capa-citor connected inside the pump• The pump is equipped with 5 m of H07RN-F electric cable .• Single-phase version with float switch for automatic control avai-lable on request.MOTOR• 2 poles, asynchronous motor, 50 Hz, 2850 rpm.• Class F insulation.• IP68 protection.• Working voltage: single-phase 230 V, ...
Condensate pumps are used in steam heating systems to collect and quickly return condensate to the boiler or boiler feed unit. Pumping action is controlled by an integral float switch on simplex (one pump) units or mechanical alternator on duplex (two pump) units. Unlike boiler feed units, which are controlled by a boiler mounted ...
.• The pump is equipped with 5 m of H07RN-F electric cable.• Single-phase version with float switch for automatic control available on request.On request pump realized in stainless steel AISI 316.MOTOR• 2 poles, asynchronous motor, 50 Hz, 2850 rpm.• Class F insulation.• IP68 protection.• Working voltage: single-phase 230 V, three-phase 400 V.• ...