heated-sampling-system Downloads
77 downloads found
Premium
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze 32M,…). To be used with heated analyzers such as MIR FT, MIR 9000H, Graphite 52M, Topaze 32M ...
ByENVEA
Premium
With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallelwith only one instrument.The analyser is particularly suitable for application in indoor or outdoor air quality monitoring.The analyser is available as 19“ rack mount system, outdoor housing, or in combination with a CAMS (Compact Air Monitoring System) as ...
Premium
The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID ...
Premium
The dry extractive SEC™ system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling ...
ByENVEA
Premium
J.U.M. Engineering was established on the 15th of November in 1973 in Munich Germany. The company was started by Tillmann W. Knapp and two partners to fulfill some important requirements for unbiased heated sampling solutions in the automotive raw diesel exhaust hydrocarbon gas emissions market also to be applied to industrial hydrocarbon gas ...
For the sampling of gas from up to 4 separate locations, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19” rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
Measures hydrogen (H2) in tail gas treating unit (TGTU) applications where hydrogen sulfide (H2S) measurement is not required The 934 is a rugged analyzer adapted from the 931/932 UV analyzer platform for the measurement of H2 in TGTU applications, where the hydrogen sulfide (H2S) measurement is not required. With a heated sensor and sample ...
From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. ...
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111 x.x Embracing Challenge Fully integrated microprocessor based dilution sample system Touch panel (HMI) display for operator control, trending and alarms (logged) Remote server access for both ...
The heated sample lines are manufactured according to the clients specification and completely confectioned in the factory at a fixed length. The heating element used in this type of heated line is an autoregulated ribbon. The heated line is secured closely to the sample carrier tube, thus eliminating the occurrence of cold zones or spots in the heated line, and therefore also eliminating the ...
Robust design with flexible corrugated jacket made of PA12 or metal as option; Very long length up to 150 m possible; Operation with external temperature controller; With fixed resistor heating cable; Max. 260°C control temperature; Ready made ex-works (ready to ...
Short to medium length possible; Operation with external temperature controller; Fixed resistor heating cable for low bending radius; Max. 260°C control temperature; Ready made ex-works (ready to use); Ultra flexible design Co-Extruded or PA ...
Robust design with flexible corrugated jacket made of PA12 or metal as option; Very long length up to 150 m possible; Operation with external temperature controller; With fixed resistor heating cable; Max. 260°C control temperature; Ready made ex-works (ready to ...
IntroductionPerma Pure GASS-2040 sample pre-conditioning systems are designed to prepare gas samples foranalysis. ...
Technical Heaters, Inc. is proud to introduce the new StackFlex heated sample line. With cutting edge technology, the StackFlex line is the best solution for your Continuous Emission Monitoring needs. THI has engineered the StackFlex line with a fast heat-up time and the lightest sample line in the ...
Premium
Low sample flow extraction of only 50 l/h, to enhance the operation of sample gas preparation. Use of optimized NDIR technology with improved accuracy and without zero offset. O2 measurement with a long-life electrochemical or a paramagnetic sensor. True NOx and SO2 measurements through use of heated gas sampling probe and gas sampling line. Heated and temperature regulated acid mist catch & ...
The CDS Model 6150 Pyroprobe is the basic model of CDS's 6th generation Pyroprobe. The 6150 connects to any model GC with a heated sample line for easy on/off installation. Low thermal mass programmable interface allows for thermal desorption of volatiles before pyrolyzing the sample. ...
The series of heated hoses Jhxx is designed to transport sample gas from the to the sample conditioners respectivly analysers with constant temperature. heated hoses are available in several versions and with a selection of end caps, for indoor as well as for outdoor use. This manual applies only, if the appropriate product is selected for its intended use. Please consult our sales team for a ...
Applications: Digital temperature controller and Solid State Relay combination for all (very long) JCT heated sample lines. For operation wit elevated safety requirements due to a limiter function with permanent shut down and status message. Also universal applicable for temperature control. For PWM-heating ...