impeller-pump Downloads
617 downloads found
Premium
The 880-PHO is Randolph’s largest peristaltic fluid pump. The housing is machined from an aluminum casting. Plated steel components are used for the pump impeller, plate, and shaft. The 880-PHO, is ruggedly designed for long-life and easy maintenance. The pump is capable of flows up to 21 gallons per minute at 190 RPM. The 880-PHO is an excellent choice for various industrial ...
Premium
The 880-PHO is Randolph’s largest peristaltic fluid pump. The housing is machined from an aluminum casting. Plated steel components are used for the pump impeller, plate, and shaft. The 880-PHO, is ruggedly designed for long-life and easy maintenance. The pump is capable of flows up to 21 gallons per minute at 190 RPM. The 880-PHO is an excellent choice for various industrial ...
“Bladeless” Sil V IllSingle Vane Impeller Since larger pumps tend to clog less frequently than smaller gp pgqypumps, “bladeless” single vane impellers are ideally suitedfor pumps 2” to 5”, pumping at a lower capacity. ...
ZUWA Centrifugal PumpsModel CMMultistage, regular priming centrifugal pump for service water and irrigation – operates extremely quiet. For water temperatures up to 40°C.pump body, shaft and impeller: stainless steelrotary seal: ceramic/graphitethermal motor protection and cableThe pump is also available with electronic pump ...
The pumps are a simple design of a pump screen surrounding a 1/2 Horsepower motor with a bronze impeller. The pump does not require a control panel and can be operated continuously, as long as it is suspended in water. Rope Brackets are provided to allow for anchoring the pump. As the pump runs, ...
Meet your chopper pump and non-clog alternative: Pioneer Pump Vortex Series Pumps eliminate costly and disruptive downtime by passing through the most challenging solids using a recessed stainless impeller, making them ideal for applications where fluid conditioning, macerating, or mix-prevention are unnecessary. Vortex technology saves time and money by eliminating internal wetted parts, like ...
Discharge Flange: DN 40 - DN 50. Capacity: 60 m3/h. Head: 450 m. Frequancy: Three-phase 50 Hz - 60 Hz*. Tempreature of Pumped Liquid: From -20 °C to + 110 °C. Maximum Operating Pressure : 30 bar (63 bar)*. ...
Patented Turo Vortex TA impeller for pumping of raw municipal sewage with a high content of fibers without clogging. Fully recessed impeller for maximal free passage. ...
Kapacitetsdiagram / Capacity diagram / Diagrammi di capacità??Pump / Pump / Pompa Motor / Motor / MotorePumpPump PompaBenämningTitleTitoloWeightVikt (kg)Peso kWSpänningVoltageTesionePol PolesPoli Class IPAnmärkningNoteNota6300370 Pump P 65B GG H/A 100 20,4 1,7 3x230/440V 2 F 546296950 Pump P 65B GG H/A 106 24,3 2,2 3x230/440V 2 F ...
P P 40 PPU - 40 PPU - Single-phaseSingle-phasePump / Pump / Pompa Motor / Motor / MotorePumpPump PompaBenämningTitleTitoloWeightVikt (kg)Peso kWSpänningVoltageTesionePol PolesPoli Class IPAnmärkningNoteNota6300350 Pump P 40PPU H/D 90 7 0,45 1x230/440V 2 F 54Ø90/50Hz(Ø80/60Hz)46%44%42%47%42%44%46%POMPE INDUSTRIALIINDUSTRIAL PUMPSINDUSTRIPUMPAR?Perfecta ...
This could cause component failure to pump. Recommended horsepower, listed below, is for water only. Heavier fluids may require additional horsepower or a trimmed impeller. Pedestal pump for long coupling to electric motor. IMPORTANT DO NOT USE WITH FLAMMABLE LIQUIDS. Pump Only packs complete and ready for attachment to gasoline ...
Single-impeller pumps with high head SAE flanged support. Surface pumps for power take-off. Possibility to build motor pumps. ...
4” Submersible, Enclosed Impeller (Class 1, Div.1, Groups C & D Hazardous Location ...
Connections: Inlet nose 063 int outlet hose 093 int Working pressure: max 3 bar. Media temp: max 90°C. Ambient Temp: max 408C. Mounting Fitted with horizontal motor shaft. Induction motor in accordance with IEC standards. External motor protection required. Alternative voltages and power models on ...
Technical Information Connections: inlet hose 083. Outlet hose 053 Working pressure: max 3 bar. Media temp: max 909C. Ambient Temp: max 408C. Mounting. Fitted with horizontal motor shaft. Induction motor in accordance with IEC standards. External motor protection required. Alternative voltages and power models on ...
Single-impeller pumps with SAE low head flanged support. Surface pumps for power take-off. Possibility of making motor ...
The Hayward Gordon XR Torus Recessed Impeller pump, is a true vortex pump. Due to the nature of its design, the XR Recessed Impeller Pump is highly effective at handling abrasive slurries, stringy or fibrous materials, sludges and fluid with high gas ...
3” Submersible, Enclosed Impeller (Class 1, Div.1, Groups C & D Hazardous Location ...