leak-detection-controller Downloads
45 downloads found
Designed to work with all of RLE’s leak detection controllers, the SD-Z spot detector can be connected to other SD-Z units or to sensing or non-sensing cable. The SD-Z can be used with either zone or distance-read leak detection controllers. When used with a distance-read system, the SD-Z simulates 50 feet of cable – 25ft. (7.62m) from the male connector to the SD-Z, and 25ft. ...
The LDRA6 accommodates six inputs that can be configured for zone water detection or as remote alarm annunciators. An LDRA6 can monitor for both leaks & alarms generated by networked equipment. ...
Andel’s FLOODLINE ONE-ZONE WATER LEAK DETECTION CONTROL PANEL offers a cost-effective, stand-alone system where a small amount of detection is required. ...
The SeaHawk 10K distance-read leak detection controller monitors up to 10,000 feet (3,048 meters) of sensing cable. It is compatible with all SeaHawk sensing cables and the SeaHawk SD-Z spot ...
Three Zones of Integrated Leak Detection. The BMS-LD3Z provides three zones of RLE’s patented leak detection that directly integrates via protocols into any building management system (BMS) or alarm monitoring system. Pair the BMS-LD3Z with RLE’s SeaHawk sensing cables and spot detectors to monitor for conductive fluid and caustic chemical leaks and integrate this information directly ...
1,000 Feet of Durable, Patented Leak Detection. RLE’s most rugged single zone controller, the LD1000 provides reliable leak detection, preventing facility and equipment damage, costly business outages, and ...
The SeaHawk LD310 single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable. It is compatible with all of RLE’s leak detection sensing cables, as well as SD-Z and SD-Z1 spot detectors. ...
Premium
Get accurate, reliable mass flow control with SideTrak 840 analog mass flow meter and controller. This traditional mass flow meter: Features precise primary standard calibration to measure any gas with low pressure drop. Accurately measures oxygen, mixtures, toxics, corrosives, combustibles. Is widely used in process control, leak detection and gas distribution. The 840 flow meter has proven to ...
- Leak Testing -Software platformSpecialist in leak testing & leak detection since 1973- Leak Testing -Control and log production dataProduct overview• mosCura is a platform with a line of adaptable production solution ...
ByNolek AB
The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable. It is compatible with all SeaHawk sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors. As a stand-alone leak detection controller, the LD1000 features an audible alarm and three LED indicators. It is ideal for small areas, facilities where the sensing cable or spot ...
Direct Connection to Your Leak Detection Controller. The SD-Z1 is a single zone spot detector designed to work with zone leak detection systems including the F200, LD310, LD1000, and LDRA6. RLE recommends using only one SD-Z1 per zone. Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans. ...
The SeaHawk LD2100 distance-read leak detection controller monitors up to 5,000 feet (1,524 meters) of sensing cable. Robust and web-accessible, it is compatible with all SeaHawk sensing cables and the SD-Z spot ...
The Model 3675 Leak Test Station is a cost-effective turnkey station to deliver the speed and accuracy of Sciemetric leak testing in your plant. Use up to three 3520 Series Leak Test units controlled by a single sigPOD to conduct a range of leak tests, including pressure decay, mass flow, vacuum and more. The flexible Model 3675 can be used in production, in a lab or wherever you need to conduct ...
DescriptionOMNTEC’s LU and LPD leak-detection and overfill-alarm systems provide continuous, accurate monitoring in a variety of applications. Typical applications are reservoirs, sumps, dry interstitial spaces and dispenser pans. These easy-to-install controllers alarm for in tank levels and leak condi-tions. The LU ...
DescriptionOMNTEC’s LU and LPD leak-detection and overfill-alarm systems provide continuous, accurate monitoring in a variety of applications. Typical applications are reservoirs, sumps, dry interstitial spaces and dispenser pans. These easy-to-install controllers alarm for in tank levels and leak condi-tions. The LU ...
DescriptionOMNTEC’s LU and LPD leak-detection and overfill-alarm systems provide continuous, accurate monitoring in a variety of applications. Typical applications are reservoirs, sumps, dry interstitial spaces and dispenser pans. These easy-to-install controllers alarm for in tank levels and leak condi-tions. The LU ...
GENERAL SPECIFICATION 1.1 The contractor shall provide RLE Technologies’ SeaHawk LD2100 Distance Read Water Leak Detection System to perform the functions of water leak detection, event annunciation, and integration into other alarm management systems. ...
The SeaHawk LD1500 distance-read leak detection controller monitors up to 1500 feet (457 meters) of sensing cable. This web-accessible controller is designed for simple integration into existing monitoring systems, and is compatible with all SeaHawk sensing cables and the SeaHawk SD-Z spot ...
Leader cable and an EOL are necessary components for any leak detection system and are sold with most SeaHawk leak detection controllers. Since sensing cables cannot attach directly to a controller, the 15-foot (4.57 meters) leader cable connects the sensing cable to any SeaHawk leak detection controller. ...
PAL-AT is a versatile leak detection controller with advanced features that can detect leaks for a wide range of applications for water, corrosive liquids and hydrocarbons. The PAL-AT can operate as a standalone leak detection system, as part of an enterprise solution of multiple networked PAL-AT systems monitored by PALCOM software or as an integrated solution with third party BMS systems via ...