multichannel-controller Downloads
10 downloads found
Premium
The 8800 controller combines the reliability of our proven 7800 controller with advanced upgrades in one low cost package. The 8800 controller provides simultaneous display and alarm functions for up to 16 input variables. 8 or 16 channel display modes, and I/O modules arranged in groups of 8 channels, allow economical configuration of systems. This easy-to-configure, user friendly controller is ...
Premium
A secure system for gas and flame detection. The MX 62 provides a back up system,to ensure an accurate analysis from the sensors to meet more and more specific requirements. The MX 62 system already meets the requirements of ATEX 100 A and offers the high level of security required by the SIL 3 (EN 50402). The MX 62 monitor has incorporated these new requirements and other future needs. Through ...
Premium
The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact requirements. ...
Premium
The Detcon X40 controller (Figure 1) is a multi-channel gas detection control system. The X40 serves as a host monitor/controller for a network of gas detection sensors and various other field devices. The controller offers a non-intrusive magnetic interface with backlit LCD display and Modbus technology that supports either wireless or a hard wire sensor connection. The X40 is equipped with an ...
Applications: Multichannel-System (Discontinuous Measurement Control). Calibration ...
The RT406-1C is a multi-channel temperature measurement system designed to monitor and control temperature on heated godet roll shells. Digital circuitry in the rotating transmitter and the stationary receiver are immune to electrical noise and drift. ...
There are two basic types of units: a Modular Dyna-Blender and a Multichannel Dyna-Blender.Modular Dyna-Blender Model 8280Matheson’s Modular Dyna-Blender, when used with an existingmass flowmeter or controller, accurately blends gases in adynamic flowing system. ...
TEL:86-519-86960058 FAX:86-519-86968907-8322Featurel With high-performance single monitoring chip ensuring the accuracy and the stabilityl Can connect with multichannel sensorl Realize multiple control for one environment or independently monitor and control severalenvironmentsl Includes 3 types( 4 channels,8 channels and 12 channels)l Display ...
The Syntech IDAC-4 interface for the USB port combines a programmable 4-channel signal amplier with programmable output signals for direct control of solenoids, ow controllers, multichannel olfactometers, and other actuators (motors, lights, sounds). With the IDAC-4 it is now possible to record electrophysiological signals while presenting complex, multimodal, and dynamically programmable ...
Two control cards are available. Part number C25005 is designed for use with the T100 detector head while Part number C55005 control card is designed for use with the CGS500 or similar thermocatalytic sensor.The Multichannel Gas Monitor is also compatible with a wide range of third party sensors and 4-20mA transmitters including temperature ...