power-current-sensor Downloads
16 downloads found
0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption. (Optional solid-core current sensors available in 100 & 200 amp.). Onboard diagnostics and verification ...
ByE-Mon
0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption. (Optional solid-core current sensors available in 100 & 200 amp.). Onboard diagnostics and verification ...
ByE-Mon
Available in MMU (Multiple Meter Unit) enclosures containing up to 24 meters in one compact enclosure. 0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption. (Optional solid-core current ...
ByE-Mon
Gas sensor GSE 507 for detection of Carbon Monoxide CO Mode of operation The principle of the measurement cell used is based on the electro-chemical oxidation of carbon monoxide CO to carbon dioxide CO2. ...
Gas sensor GSE 307 for detection of Hydrogen H2 Mode of operation The principle of the measurement cell used is based on the electro-chemical oxidation of hydrogen H2 on the working electrode. ...
Gas sensor GSE 401 for detection of Oxygen O2 Mode of operation The principle of the measurement cell used is based on the diffusion of oxygen. ...
Premium
If not using Delta-T equipment, please refer to the manufacturer's instructions.If you simply want to log the probe voltage directly, it can be treated as a differentialvoltage source of range 0 - 1.5V DC, and the attached meter or logger should be configuredaccordingly.Warning: use as a single-ended voltage source will introduce measurement errors dueto the sensor ...
.• Selectable time delay, for pump two, on power up to prevent both pumps from starting at the same time. If power is lost, upon regaining power a time delay of up to 60 seconds can be selected to prevent too large of a current draw.FEATURES• Selectable pump alternation when used with two pumps to minimize pump wear. ...
The different materials provide different performance characteristics (magnetic sensitivity represented by electron mobility and band gap, operating voltage, temperature sensitivity, etc.) allowing the design engineer to choose the best solution for the particular application.Applications AKM SeriesHall Element MaterialMagnetic Sensitivity Temperature CoefficiencyRelative RankingElectron Mobility ...
Transmission errors require only a repeat transmission of the packet, not the entire data file.PRODUCT FEATURESLEVEL MEASUREMENTTransducer Type: Any 4:20 mA current loop level sensorMethod : Pulse activation with configurable sensor warm-up time. Loop current measurement by self-calibrating 16-bit delta-sigma A-D converterCurrent Range : 0-30 ...
Transmission errors require only a repeat transmission of the packet, not the entire data file.PRODUCT FEATURESLEVEL MEASUREMENTTransducer Type: Any 4:20 mA current loop level sensorMethod : Pulse activation with configurable sensor warm-up time. Loop current measurement by self-calibrating 16-bit delta-sigma A-D converterCurrent Range : 0-30 ...
Sensors may be added or removed as required, but should be carried out with the power to the unit switched off. ...
It can display several types of values, which change according to set operating mode and type of connected sensors.1 ...
ByARAG Srl
For single or 3-phase systems using 80-600V phase-to-phase (AC or DC) services when line powered or 0-600V (AC or DC) when externally powered. Measures up to four channels of energy metrics with currents ranging from 0-6,000 amps. ? Analog Inputs record analog data with configurable input ranges for voltage (0-10 VDC) or current ...
Premium
No sensor parts are allowed to be removed on principle To avoid disturbances from electrical interferences, the sensor cable must not be laid close to (or parallel to) engine (motor) lines or main power lines. ...
If set to “Title”, it will read, for example: “Amazon River Mud” (the title of your current selection). For a visual example, see section 1.1. Warm Up Time: This value is used to set a time for the external sensor to stabilize, upon power up, before any readings are taken. ...