proximity-sensor Downloads
103 downloads found
Premium
Non-contacting extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 75mm away from the ...
Premium
The P100 Proxswitch is an 18 mm inductive proximity sensor designed to detect shaft speed, shaft position, gate position, or object presence. The P100 Proxswitch is a limit switch style proximity sensor, which works on the damped oscillator principle. No contact is made between the sensor and the object being ...
By4B Group
Premium
The P300 is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence. No contact is made between the sensor and the object being monitored. Maximum range of ferrous targets is 8 mm (5/16”) and for non-ferrous targets is 5 mm (6/16”), assuming a 20 mm (3/4”) diameter target. Smaller targets may be used but operating distances will be ...
Premium
The P100 is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence. No contact is made between the sensor and the object being monitored. Maximum range of ferrous targets is 6 mm (15/64”) and for non-ferrous targets is 5 mm (13/64”), assuming a 20 mm (3/4”) diameter target. Smaller targets may be used but operating distances will be ...
Premium
Approved for explosive atmospheres: ATEX and IECEX, Zones 20, 21 & 22 for dust, Zones 0, 1 & 2 for ...
Premium
Approved for explosive atmospheres: ATEX, IECEx, EAC Ex and CCCEx. Zones 21 & 22 for dust. Zones 1 & 2 for gas. Zone M2 for ...
Premium
Non-contacting extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 100mm away from the sensor. The WDA sensor can be used on bucket elevators to measure speed and alignment by sensing either the metal elevator buckets, or the ferrous bolts attached to plastic buckets. A more specialized use for the WDA switch is as a ...
By4B Group
Premium
Non-contacting extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 75mm away from the ...
The SW-2 proximity sensor is an electronically controlled switch activated by most ...
Premium
Non-contacting high-power, extended range magnetic proximity sensor, not affected by dust or material build up, used to detect moving ferrous material up to 75mm away from the ...
By4B Group
Improved durability ensures stable operation in any environment. The ultra-long distance model offers four times the detecting distance compared with conventional models. This increased range helps reduce the risk of damage from impacts and abrasions. The all-metal models go even further to protect the sensor by featuring a stainless steel detection surface for superior environmental resistance. ...
Crane Aerospace & Electronics provides proximity sensor based indication and control, tire pressure indication, and fuel gauging. In addition, we offer a full range of proximity sensor, tire pressure, fuel gauging and power conversion components for use in demanding environments for our customers; system applications. ...
Shorter, space saving sensor bodies with high detection sensitivity and long detection distances. ...
Shorter, space saving sensor bodies with high detection sensitivity and long detection distances. ...
The air proximity sensor is a non-contact, no-moving-part sensor, capable of detecting the presence of an object at ranges up to 1/8". In the absence of an object, air flows freely from the sensor resulting in a near zero output signal. The presence of an object within the sensing range deflects the normal air flow and results in ...
Premium
The A400 Elite Trackswitch belt misalignment monitor uses 4B WDA or BAP magnetic proximity sensors to monitor the alignment of the belt in bucket elevators. Each control unit incorporates two independent monitoring circuits for early detection of belt misalignment on one or two bucket elevators. The 4B magnetic reluctance sensors operate in pairs to detect the position of steel bolt heads or ...
By4B Group
